UK-POLOS.NET - THE VW Polo Forum

What happens if you write 04 in the bottom (direct entry) and select GO in the 'select module' screen? Hi iichel :D , I bought OEM VCDS,There is a very big difference between OEM and clone :D :D now I can see 04 control tables in module 04. In 04 basic settings, I cannot calibrate the sensor becaus...

The bits and bytes are for cornering lights. You can put them back. Did you select 04 in the CAN gateway installation list? Can you open the module with VCDS? YES 04 CAN gateway installation list I can't see it after entering the Select module. Only when I make Autoscan can I enter Steering Angle I...

Thank you for your help iichel :D I did the installation according to Ciclo instructions :D In 03 ABS I can not calibrate the steering wheel sensor in the basic settings an error appears. https://i.postimg.cc/qzbfKffm/IMG-20200506-190403.jpg after selection Bit 21-2.7 Bit 12-6 Bulb failure warning i...

Ah yes, installation of G85 OEM: T41/5 goes to SB20 (red/yellow) T41/6 goes to SB9 (blue/black) If there is space, you can splice to these wires. I expect that there are already wires going to these fuses. thank you, yes sb 20 and sb 9, I have Sb 20 cables I have a Ciclo cable ;-) I'm a bit lost🤪Ca...

Ah yes, installation of G85 OEM: T41/5 goes to SB20 (red/yellow) T41/6 goes to SB9 (blue/black) If there is space, you can splice to these wires. I expect that there are already wires going to these fuses. thank you, yes, I have Sat 20 cables I have a Ciclo cable ;-) I'm a bit lost🤪 https://i.posti...

Ignore SB54. It is obsolete if you make new cornering lights. SB54 installation: +75 contact --> light switch T17/2 (in) T17/8 (out) --> SB54a/b --> fog lights. So SB54 can be removed and the wires can be left (or better, removed and isolated). You see, no BCM interference. Your new installation wi...

hi corner lighting one fuse goes to sb 57 and the other to sb54? on sb 54 which cable should i connect to?

T41/5 SB 57
T41/6 SB should I connect to 54

two are the same white and orange

iichel wrote: ↑Wed Apr 29, 2020 5:45 pm Sorry for missing out.

For flashing with VCP/ODIS in C module:
https://drive.google.com/open?id=1TX0-n ... giQjr9W7xt

I did it like that

Hi :D :D :D , with the help of Firegrafik we have done the TinyQ paramatrization and AFS works :D :D :D Thank You :D :D Address 55: Headlight Range (J431) Labels: 6R0-907-357.clb Part No SW: 6R0 907 357 C HW: 6R0 907 357 B Component: AFS-ECU 005 0050 Revision: -------- Serial number: -------------- ...

Thank you :D :D I did AFS installations, but I received errors, I have to flash the module :D Address 55: Headlight Range (J431) Labels: 6R0-907-357.clb Part No SW: 6R0 907 357 C HW: 6R0 907 357 B Component: AFS-ECU 005 0050 Revision: -------- Serial number: -------------- Coding: 0F44020001000000 S...

Try 042200 as CAN gateway coding Address 19: CAN Gateway (J533) Labels:. 7E0-909-901.clb Part No SW: 7E0 909 901 HW: 7E0 937 090 Component: GW-K-CAN TP20 H80 0736 Revision: B9080001 Coding: 042200 Shop #: WSC 02737 022 00190 VCID: 68DF0DA79B73D20F0F-803C No fault code found. Yes, it worked, thank y...

thank you fernando :D I will try to do as you wrote 8) I solved the problems with the lights that I described earlier :D I have replaced the module corresponding to the lamp 7PP941571AE( Z01) https://i.postimg.cc/HV5j7FnM/IMG-20200414-181634.jpg I also installed the front and rear parking sensors :D...

I finished making the AFS cable bundle :D :D T26 / 2 -T73B/19 CAN drive High bus T26 / 3 - T73B/18 CAN drive Low bus T26 / 7 - T4 / 1 sensor T26 / 10 -T4 / 3 sensor T26 / 11 - T4 / 4 sensor T26 / 15 - right lamp T14 / 1 T26 / 16 - left lamp T14 / 3 T26 / 17 - left lamp T14 / 1 T26 / 18 - left lamp T...

Hello :) I was able to solve the problem with the flashing light :D The module turned out to be a problem 7PP941571AE It probably had a different value than 7PP941571AE (Z01) :) I bought a used module extracted directly from the lamp FULL LED polo 6c :) Waiting for one more module for the left lamp ...

Today I took a closer look at my problem with lights. My BCM coding 3DB02BB828F3240092380090BC2B1CD01BC0660F60813041200000030000 DRL-OK Parking light-OK Low Beam - the left lamp turn on 1 second later than the right.The right lamp flashes two three times. This also happens while driving. Once in a w...