How to fix the 6N2 ABS Signal Outside Specifications Fault

Post Instructions on DIY modifications here - use all information with caution!
User avatar
alexperkins
Site Admin
Posts: 14729
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 67 Q7
Location: Poole, Dorset, UK.
Contact:

Re: How to fix the 6N2 ABS Signal Outside Specifications Fault

Post by alexperkins » Thu Nov 07, 2019 11:56 am

Hi Vas

Could be damaged wiring in the ABS loom. Any faults showing now?

vas.bak
New
Posts: 10
Joined: Sun Jan 01, 2017 11:55 am

Re: How to fix the 6N2 ABS Signal Outside Specifications Fault

Post by vas.bak » Mon Nov 18, 2019 9:35 pm

Alex actually me mekanic was check the abs wiring loom also the wiring from and modul to the left sensor.
Have any idea what it happens,
Thank you very much for your answer also your very important help mate

vas.bak
New
Posts: 10
Joined: Sun Jan 01, 2017 11:55 am

Re: How to fix the 6N2 ABS Signal Outside Specifications Fault

Post by vas.bak » Mon Nov 18, 2019 9:36 pm

The wiring it's ok

vas.bak
New
Posts: 10
Joined: Sun Jan 01, 2017 11:55 am

Re: How to fix the 6N2 ABS Signal Outside Specifications Fault

Post by vas.bak » Tue Nov 19, 2019 1:43 pm

I connect vcds and the fault I read is left front sensor problem. We delete the fault but comes again.
2 brand new sensors we change but the problem stay.

User avatar
alexperkins
Site Admin
Posts: 14729
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 67 Q7
Location: Poole, Dorset, UK.
Contact:

Re: How to fix the 6N2 ABS Signal Outside Specifications Fault

Post by alexperkins » Wed Nov 20, 2019 7:52 am

I’d say you more than likely have an internal break in the ABS wiring that feeds that sensor so you won’t see it. I’d replace the loom that goes through the wing to rule it out

vas.bak
New
Posts: 10
Joined: Sun Jan 01, 2017 11:55 am

Re: How to fix the 6N2 ABS Signal Outside Specifications Fault

Post by vas.bak » Thu Nov 21, 2019 9:52 am

Alex thank you for your fast answering mate.
that is, you are so sure that it is not the ABS unit and it is wiring loom?
I ask because my mekanic was check ohmmeter the wiring loom that feed the sensor from the unit and it's OK.
You think Something other?
Thank you very much.
Last edited by vas.bak on Mon Dec 02, 2019 3:52 pm, edited 1 time in total.

vas.bak
New
Posts: 10
Joined: Sun Jan 01, 2017 11:55 am

Re: How to fix the 6N2 ABS Signal Outside Specifications Fault

Post by vas.bak » Mon Dec 02, 2019 7:43 am

Alex good morning.
Please answer.
Thank you very much

User avatar
alexperkins
Site Admin
Posts: 14729
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 67 Q7
Location: Poole, Dorset, UK.
Contact:

Re: How to fix the 6N2 ABS Signal Outside Specifications Fault

Post by alexperkins » Mon Dec 02, 2019 8:04 am

I would pick up a replacement ABS module and see if the problem goes away. If you are confident the loom is ok, then you may have a faulty controller.

vas.bak
New
Posts: 10
Joined: Sun Jan 01, 2017 11:55 am

Re: How to fix the 6N2 ABS Signal Outside Specifications Fault

Post by vas.bak » Mon Dec 02, 2019 3:54 pm

Thank you very much mate.

Post Reply