LED Footwell Lighting
- Josh_PoloGTi
- Site Admin
- Posts: 2782
- Joined: Wed Oct 09, 2002 8:32 pm
- Drives: BMW E85 Z4 3.0i
- Location: Sheffield, UK
- Contact:
LED Footwell Lighting
All
Here is the wiring diagram I posted on UK-MKIVS:
LED's are hyper bright blue LEDS from Foxy.
I don't know what ohm they are, but if you buy the leds from foxy or myself
(I get them from foxy) he can supply the correct resistors for the job.
Be careful when wiring/soldering.
Double/tripple check all wiring and insulate everything!
Also be carefull not to burn yourself/your car with the soldering iron!
I cannot be held responsible for errors or omissions.
Here is the wiring diagram I posted on UK-MKIVS:
LED's are hyper bright blue LEDS from Foxy.
I don't know what ohm they are, but if you buy the leds from foxy or myself
(I get them from foxy) he can supply the correct resistors for the job.
Be careful when wiring/soldering.
Double/tripple check all wiring and insulate everything!
Also be carefull not to burn yourself/your car with the soldering iron!
I cannot be held responsible for errors or omissions.
- Josh_PoloGTi
- Site Admin
- Posts: 2782
- Joined: Wed Oct 09, 2002 8:32 pm
- Drives: BMW E85 Z4 3.0i
- Location: Sheffield, UK
- Contact:
-
- Moderator
- Posts: 1638
- Joined: Fri Jan 10, 2003 10:17 pm
- Location: Suffolk
- Josh_PoloGTi
- Site Admin
- Posts: 2782
- Joined: Wed Oct 09, 2002 8:32 pm
- Drives: BMW E85 Z4 3.0i
- Location: Sheffield, UK
- Contact:
I think Foxy is charging £2.10 for each LED with a resistor. (Plus P&P)
He also does them fully wired up with heatshrink round the cables etc, but I'm unsure of the price.
Email him on dgace@ntlworld.com and tell him I put you his way.
He also does them fully wired up with heatshrink round the cables etc, but I'm unsure of the price.
Email him on dgace@ntlworld.com and tell him I put you his way.
-
- Gold Member
- Posts: 568
- Joined: Mon Nov 18, 2002 5:17 pm
- Location: London