Page 3 of 3
Re: VW Polo MKIV Raceland Coilover Fitting
Posted: Sun Jul 17, 2011 1:24 pm
by Tim_GTi
SimonAshley wrote:Looking at fitting coilovers to my mates 6N at the end of the week.
From what I understand camber can be set up roughly with a spirit level as the holes are slotted. But what’s this about the toe needing adjustment surely this should remain unaffected?
Yeh it may go out slightly.
You wont be able to get the camber perfect, just straight enough for the time being. you'll have to take it to a garage no matter what, so let them sort it out.
Re: VW Polo MKIV Raceland Coilover Fitting
Posted: Tue Mar 20, 2012 8:56 pm
by SolidZeus
Is the 6n2 roughly the same? And is there a height adjustment guide?
I've got a height adjustment tool but not sure how it'll work
Re: VW Polo MKIV Raceland Coilover Fitting
Posted: Tue Mar 20, 2012 9:54 pm
by Tim_GTi
Yeh it's the same mate.
Re: VW Polo MKIV Raceland Coilover Fitting
Posted: Wed Mar 21, 2012 11:38 am
by SolidZeus
And what's the Allan key size for removing the front suspension ?
Re: VW Polo MKIV Raceland Coilover Fitting
Posted: Sun Mar 25, 2012 8:04 pm
by Tim_GTi
IIRC it's 7mm. But that's a guess, it's been years since I did the job!
Re: VW Polo MKIV Raceland Coilover Fitting
Posted: Sun Mar 25, 2012 8:49 pm
by SolidZeus
Tim_GTi wrote:IIRC it's 7mm. But that's a guess, it's been years since I did the job!
Yea it was 7mm Thanks
Re: VW Polo MKIV Raceland Coilover Fitting
Posted: Tue Apr 16, 2013 11:22 pm
by browny23
Did you use a spring compressor
Sent from my Nexus 7 using Tapatalk 2
Re: VW Polo MKIV Raceland Coilover Fitting
Posted: Thu Nov 08, 2018 12:28 pm
by StagedriveRy
On the rears.... in the pic after you put the old rubber bit on, theres no thread visable.... and then the next pic (after its fitted on the car) theres plenty of thread... what am i missing?!
Thanks