Snapped control arm 6n2

Discuss Suspension, Brakes, Wheels and Tyres
Post Reply
Feeblington
New
Posts: 6
Joined: Wed Oct 17, 2018 12:06 pm
Drives: 6n2 1.4 se
Location: Cardiff

Snapped control arm 6n2

Post by Feeblington » Tue Feb 05, 2019 11:56 am

Hello all. My driver side control arm almost snapped on my home the other day. I have replacement part for it. But just wanted a little advice on how todo this. Ive got a haynes manual and a fairly good understanding. Just didnt want to dive straight in.
Can anyone give me a rough guide (inc do i need to removw balljoint or is the knuckle in the way)
Any help would be appreciated
Attachments
20190202_170301.jpg

User avatar
alexperkins
Site Admin
Posts: 14485
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 67 Q7
Location: Poole, Dorset, UK.
Contact:

Re: Snapped control arm 6n2

Post by alexperkins » Wed Feb 06, 2019 6:21 pm

Renew the ball joint and the anti roll bar drop link with decent quality parts - Febi or Genuine

Its a reasonably easy task if you are good with a set of spanners. You need to put the front side in before pivoting in the rear horizontal bush part of the control arm

it is however easier on a ramp rather than a jack due to access. Depends how comfortable you are with limited working space

Post Reply