So I decided to put new wheels on my polo. Bought 14 inch, 6.5j et 30 alloys. And now when I drive I hear this clicking noise and steering wheel stutters/shakes more. Feels wierd on turning.
Is this matter of wheel balance or is it more serious?
New wheel problem on 6n2
-
- New
- Posts: 26
- Joined: Thu Oct 25, 2012 12:03 am
- Location: Dublin, Ireland
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: New wheel problem on 6n2
Are the wheels brand new?
First, jack it up and make sure that the wheel spins freely without noise
Second, check your tyre pressures (30 all round)
First, jack it up and make sure that the wheel spins freely without noise
Second, check your tyre pressures (30 all round)
-
- New
- Posts: 26
- Joined: Thu Oct 25, 2012 12:03 am
- Location: Dublin, Ireland
Re: New wheel problem on 6n2
So turns out my front wheel bolts are coming loose ( All of them ) Just after two day driving. I tightened them again now while wheels are cold.
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: New wheel problem on 6n2
Have you used a torque wrench?
-
- New
- Posts: 26
- Joined: Thu Oct 25, 2012 12:03 am
- Location: Dublin, Ireland
Re: New wheel problem on 6n2
Just Regular wheel wrench that lays in my boot with spare.
- alexperkins
- Site Admin
- Posts: 14866
- Joined: Sat Nov 11, 2006 5:29 pm
- Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
- Location: Poole, Dorset, UK.
- Contact:
Re: New wheel problem on 6n2
I would suggest getting them tightened properly at a garage to ensure they dont come undone again
Its a little concerning all the bolts were loose Could've had a major accident
Its a little concerning all the bolts were loose Could've had a major accident
-
- New
- Posts: 26
- Joined: Thu Oct 25, 2012 12:03 am
- Location: Dublin, Ireland
Re: New wheel problem on 6n2
Yea a bit scary. Anyhow I am going to garage on saturday to get my wheel alignment/balance done. Will get the bolts checked aswell then.