1996 Polo 1.2 Hardwire Dashcam-Fuse info please

Discuss In Car Electronics / Electrical Systems - use with caution!
Post Reply
kkcat
New
Posts: 1
Joined: Wed May 22, 2019 3:33 pm
Drives: VW Polo 1996 1.2 petrol
Location: Manchester

1996 Polo 1.2 Hardwire Dashcam-Fuse info please

Post by kkcat »

Hi All
I am new to the forum and after some help- please. My daughter has passed her test and is driving our 2009PoloE- 1.2 petrol. She has a dashcam (Nextbase 112)and I am trying to hardwire it. I have successfully run the cable and tried to connect via the standard Nextbase hardwire kit. It comes with a ‘plug in’ fuse adaptor.
It says to plug into a 5amp fuse yet the only 5amps I can see are all small fuses and not the larger type on the bottom set of fuses.

Would anyone know which fuse I can plug this into please. I had though the cigarette one but that’s a 15amp.
User avatar
alexperkins
Site Admin
Posts: 14775
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 67 Q7
Location: Poole, Dorset, UK.
Contact:

Re: 1996 Polo 1.2 Hardwire Dashcam-Fuse info please

Post by alexperkins »

Welcome

Can you post a photo up of what you have? Normally they have a holder that holds the original fuse and an additional fuse for the dashcam
Post Reply