So today my plan was to get some tyres stretched onto the wheels and pick up my wobble bolts
run into two problems....
first problem was that I had been sold the wheels as 8inch wide.... oh no, no, no, turns out they are 8.5" wide
so after getting some 185/35 tyres saved for me I went to get them fitted, much to my horror that the tyres wouldnt actually stretch on
Tried for almost an hour on one wheel but it wouldn't pop onto the bead and it kept losing pressure so we sacked those tyres off
I wanted to go for 195/35 but considering they are hard to get a hold of i've sacked that idea off but the test fit of the wheels has shown me that I won't actually need to go for such a low profile tyre so an executive decision was made and 195/40s will be enough I reckon.
The next problem we had was because i'm using 15mm adapters for the wheels, the wobble bolts are too long so we're going to have to cut them down.
Not overly fussed, I'd rather spend that extra bit of time getting perfect fitment and doing it properly than to rush and it look s**t or be badly fitted
So here they are on a test fit, I'm extremely happy with the result and will absolutely, under no circumstances, be changing the wheels again any time soon
They are Modena Racing wheels (kindly found for me by my other half)
3 Piece splits, and if you can find any information on them or know anything about where they came from or the original manufacturer it would be greatly appreciated if you could pass any info on as I've been struggling to find any info on them at all!
Polished lip, teal powder coated centres and pearl white bolts
anyway I hope you all like them as much as I do.
I won't recommend the guy who did all the powder coating etc just yet... incase it flakes off and I go searching for him with a pick axe and a shovel