Polo 9N GT, now 9n3!
Re: Polo 9N GT, now 9n3!
That would be ace if you could! What sort of angle/lighting be best? Pm me with your email:)
-
- Bronze Member
- Posts: 226
- Joined: Mon Dec 10, 2012 5:29 pm
- Location: Cardiff, South Wales
- Contact:
Re: Polo 9N GT, now 9n3!
Sorry to steal your show GreyPolo, but I got bored.
Here's a pretty s**t 5 minute photoshop job, GreyPolo can probably do a better one.
Here's a pretty s**t 5 minute photoshop job, GreyPolo can probably do a better one.
Re: Polo 9N GT, now 9n3!
That's a really good job mate! I think I like it. Could you do it to one of the newer photos with the fittipaldis.. Either of these..
-
- Bronze Member
- Posts: 226
- Joined: Mon Dec 10, 2012 5:29 pm
- Location: Cardiff, South Wales
- Contact:
Re: Polo 9N GT, now 9n3!
Couldn't really get the colour right on this one sorry
- greypolo9n3
- Gold Member
- Posts: 877
- Joined: Fri Jul 30, 2010 11:39 am
- Drives: white 6r 1.6 tdi rline/gti
- Location: peterborough
Re: Polo 9N GT, now 9n3!
I would have probable got the same results!
Id go a bit more goldier though..its too bronze
Id go a bit more goldier though..its too bronze
Re: Polo 9N GT, now 9n3!
Needing some advice on relocating the battery to the boot. Anyone know of any guides? Or even experienced it themselves. Giving the bay a little tidy/wire tuck and would like to move the battery. Along with fuel filter and coolant reservoir. Any help would be ace!!
Re: Polo 9N GT, now 9n3!
Small update on the engine bay clean up..
New home for that little ball thing..
And possible new home for that module thing.. Not fitted there yet as I need longer lines and also a proper way of securing it. But should be safe enough there?
New home for that little ball thing..
And possible new home for that module thing.. Not fitted there yet as I need longer lines and also a proper way of securing it. But should be safe enough there?
Re: Polo 9N GT, now 9n3!
What's everyone's opinion on this colour combo?
Ordering new dishes and bolts on Friday ready to get them all refurbed.
Could possibly do with the purple being a bit darker and more glossy..
Ordering new dishes and bolts on Friday ready to get them all refurbed.
Could possibly do with the purple being a bit darker and more glossy..
Re: Polo 9N GT, now 9n3!
Not much of an update as such, but being my first pay day in around 7 months, I thought I'd treat myself.
New set of Coilovers for the front as the current ones are knackered!
Also bought 2.0" dishes for the back and new nuts and bolts all round=D
If anyone knows of someone in the Aberdeen area that can rebuild split rims, let me know!!
This also came
I've been having some trouble with the hot side of the intercooler rubbing in the driveshaft due to the angle of it coming off the turbo, so hopefully this will solve it!
And a possible colour for the wheels, prefer how dark these are
Car is also getting a good going over by a friend who works at a body shop, full machine polish etc this weekend, will get a few pics up after that!!
Opinions on wheel colour?
Cheers for looking:)
New set of Coilovers for the front as the current ones are knackered!
Also bought 2.0" dishes for the back and new nuts and bolts all round=D
If anyone knows of someone in the Aberdeen area that can rebuild split rims, let me know!!
This also came
I've been having some trouble with the hot side of the intercooler rubbing in the driveshaft due to the angle of it coming off the turbo, so hopefully this will solve it!
And a possible colour for the wheels, prefer how dark these are
Car is also getting a good going over by a friend who works at a body shop, full machine polish etc this weekend, will get a few pics up after that!!
Opinions on wheel colour?
Cheers for looking:)
- greypolo9n3
- Gold Member
- Posts: 877
- Joined: Fri Jul 30, 2010 11:39 am
- Drives: white 6r 1.6 tdi rline/gti
- Location: peterborough
Re: Polo 9N GT, now 9n3!
yeahh booyy!! lol
i would have personally gone for gold instead of purple
but purple works also! get them on
i would have personally gone for gold instead of purple
but purple works also! get them on
Re: Polo 9N GT, now 9n3!
So today, while pulling into my street I heard a bang, and alot of noise. I turned off the ignition and rolled into my driveway.
I was hoping it was just a turbo pipe blown off as I've been having problems with one in particular. So thought I'd jack the car up and have a look... I hope these videos work.. As this is what greeted me.. Ouch.
http://i1129.photobu...zps4120780f.mp4
http://i1129.photobu...zps3093e638.mp4
Kind of hard to see, but basically the housing has split, so you can see the compressor wheel. You can imagine the language I used.
No idea what I'm going to do now, the turbo is only 5 months old:(
I was hoping it was just a turbo pipe blown off as I've been having problems with one in particular. So thought I'd jack the car up and have a look... I hope these videos work.. As this is what greeted me.. Ouch.
http://i1129.photobu...zps4120780f.mp4
http://i1129.photobu...zps3093e638.mp4
Kind of hard to see, but basically the housing has split, so you can see the compressor wheel. You can imagine the language I used.
No idea what I'm going to do now, the turbo is only 5 months old:(
Re: Polo 9N GT, now 9n3!
Are the videos working for people?
Re: Polo 9N GT, now 9n3!
I cant get on the vids.
This was a brand new hybrid? Wow thats unlucky :/
*Cough* http://www.darksidedevelopments.co.uk/p ... pping.html
Hope you get it sorted!
This was a brand new hybrid? Wow thats unlucky :/
*Cough* http://www.darksidedevelopments.co.uk/p ... pping.html
Hope you get it sorted!
Re: Polo 9N GT, now 9n3!
Some sad news.. The car will be getting fixed, then sold on:(
Decided I want something newer, with noise. Polo 6r gti could be on the cards.
Things for sale in the best future;
Forge front mount and pipe work, including map boss.
Oz fittipaldis, with tyres, and adaptors
Carbon fibre intake
Fk street coilovers(getting them replaced via warranty so may be a few weeks)
Sad sad day, on to big and better things, keep an eye out for my next build thread;)
Decided I want something newer, with noise. Polo 6r gti could be on the cards.
Things for sale in the best future;
Forge front mount and pipe work, including map boss.
Oz fittipaldis, with tyres, and adaptors
Carbon fibre intake
Fk street coilovers(getting them replaced via warranty so may be a few weeks)
Sad sad day, on to big and better things, keep an eye out for my next build thread;)