Mk2F Project

Chat about your MKI or MKII Polo (86 and 86F)
Post Reply
karl.ciarlo'
New
Posts: 1
Joined: Wed Sep 14, 2016 2:16 pm

Mk2F Project

Post by karl.ciarlo' » Wed Sep 14, 2016 3:07 pm

I won a 93 Mk 2 F and recently rebuilt it as a GT, using all the parts from a 91 donor GT. To keep things simple, I used the induction and exhaust manifolds from the 93 1050 engine as this is a single point injection unit whereas the 91 is a carburetor model. It works fine but when speed drops (especially in traffic) the engine sometimes sort of shakes. Mountings are ok. I am thinking this is a fuelling issue as max speed is just over 120 kms/hr which is slower than the 1050 used to give. It just sort of runs out of breath. Acceleration is good though. Has anyone been through anything similar please and / or can confirm that a 1300 injection unit would resolve this please?

Aironeuk
New
Posts: 2
Joined: Sun Mar 26, 2017 6:30 pm
Drives: Bora,Mk2 Breadvan,Mk2 Ocavia Estate
Location: Durham

Re: Mk2F Project

Post by Aironeuk » Sat May 06, 2017 5:06 pm

So you are running a gt engine on a carburettor from a smaller ingined car???

Post Reply