Seat Ibiza 6j Upgrading BCM and Auto light with CH/LH

Forum to discuss the Seat Ibiza
User avatar
ciclo
Bling Bling Diamond Member
Posts: 5912
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R Rline/G7.5/Touareg Rline'19/T-Cr'20
Location: Earth ♥, Spain ☼
Contact:

Re: Seat Ibiza 6j Upgrading BCM and Auto light with CH/LH

Post by ciclo »

Skyscript wrote: Sun Jul 07, 2019 11:57 pm I have no Ibiza SC. I checked ELSA and my wiring should be like this :

Left side :
T73b/12 --> T6d/6 RFL

Right side :
T73b/12 --> T6e/2 RFL
It's correct, I do not know why I thought your Ibiza is a SC.
Essentially it is the same, the fault is because there is no wire from the BCM T73b/12 to the reversing light/s.

Skyscript wrote: Sun Jul 07, 2019 11:57 pm Just checked the light switch and nothing is connected to T17/3. There was never anything connected with my knowledge.
With the old coding it also worked correctly.
I do not know what may be wrong with the electrical installation you did.
I think the BCM coding I provided is correct, comes from an Ibiza same like yours but with 'BCM Max' and automatic lights from factory.
Skyscript
New
Posts: 19
Joined: Mon May 13, 2019 12:16 pm
Drives: Seat Ibiza 6j
Location: Germany

Re: Seat Ibiza 6j Upgrading BCM and Auto light with CH/LH

Post by Skyscript »

I will check my wiring again and respond when I've wired the tail lights. I hope I also find the cause for the fault in the Climatronic.

Hopefully i find the cause of the fault codes fast.. :roll:
Skyscript
New
Posts: 19
Joined: Mon May 13, 2019 12:16 pm
Drives: Seat Ibiza 6j
Location: Germany

Re: Seat Ibiza 6j Upgrading BCM and Auto light with CH/LH

Post by Skyscript »

Hey,
Yesterday I managed to rewire the reverse light. Furthermore, I wired, installed and coded the new cruise control stalks.

All fault codes are now gone and everything works.
Also the climatronic fault code is gone, although I have changed nothing. :?
DRL was activated via the dipped beam only had to be re-coded.

So everything works now :D 8)
Will make updates here if I retrofit something new.

Thank you for your help Ciclo.

Final Scan :

Code: Select all

Samstag,13,Juli,2019,10:19:18:56266
VCDS -- Windows-basierter VAG/VAS-Emulator läuft auf Windows 7 x86
VCDS Version: PCI 18.9.1.0  HEX-V2 CB: 0.4505.4
Datenstand: 20190520 DS296.


Fahrzeug-Ident.-Nr.: VSSZZZ6JZER007887   KFZ-Kennzeichen: MICHAEL 
Kilometerstand: 115560km   Reparaturauftrag: AKTUELL



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Fahrzeugtyp: 6J-SE25 (6N0)
Scan: 01 03 04 08 09 15 17 19 25 44 4B 56

Fahrzeug-Ident.-Nr.: VSSZZZ6JZER007887   Kilometerstand: 115560km

01-Motorelektronik -- Status: i.O. 0000
03-Bremsenelektronik -- Status: i.O. 0000
04-Lenkwinkelsensor -- Status: i.O. 0000
08-Klima-/Heizungsel. -- Status: i.O. 0000
09-Zentralelektrik -- Status: i.O. 0000
15-Airbag -- Status: i.O. 0000
17-Schalttafeleinsatz -- Status: i.O. 0000
19-Diagnoseinterface -- Status: i.O. 0000
25-Wegfahrsperre -- Status: i.O. 0000
44-Lenkhilfe -- Status: i.O. 0000
4B-Multifunktionsstg. -- Status: i.O. 0000
56-Radio -- Status: i.O. 0000
-------------------------------------------------------------------------------
Adresse 01: Motorelektronik (J623-CBZB)       Labeldatei:. DRV\03F-906-070-CBZ.clb
   Teilenummer SW: 03F 906 070 GR    HW: 03F 907 309 AE
   Bauteil: SIMOS10.22AH10 5485  
   Revision: --H10---    Seriennummer:               
   Codierung: 001100D6202400080000
   Betriebsnr.: WSC 00049 770 00143
   ASAM Datensatz: EV_ECM12TFS02103F906070GR 004007
   ROD: EV_ECM12TFS02103F906070FP.rod
   VCID: 78A81887725EF767A6D-802C

Kein(e) Fehlercode(s) gefunden.
Readiness: 0110 0101

-------------------------------------------------------------------------------
Adresse 03: Bremsenelektronik (J104)       Labeldatei:. DRV\6R0-907-37x-ESP90.clb
   Teilenummer SW: 6R0 907 379 AS    HW: 6R0 907 379 AS
   Bauteil: ESP9.0i front H02 0002  
   Seriennummer: --------------
   Codierung: 11DD287D212300C7881C1471845800480905
   Betriebsnr.: WSC 00049 770 00143
   ASAM Datensatz: EV_Brake1ESP90iBOSCH 003020
   ROD: EV_Brake1ESP90iBOSCH_003_VW21.rod
   VCID: 0F7A435B67D0D0DF177-805A

Kein(e) Fehlercode(s) gefunden.

-------------------------------------------------------------------------------
Adresse 04: Lenkwinkelsensor (G085)       Labeldatei:* DRV\6R0-959-654.clb
   Teilenummer SW: 6R0 959 654     HW: 6R0 959 654 
   Bauteil: LENKW.SENSOR  H07 0070  
   Seriennummer: 29051304651073
   Codierung: 01
   Betriebsnr.: WSC 00000 000 00000
   ASAM Datensatz: EV_LWSKLOVW25X 005001
   ROD: EV_LWSKLOVW25X.rod
   VCID: 7EA40E9F507AC957EC1-802A

Kein(e) Fehlercode(s) gefunden.

-------------------------------------------------------------------------------
Adresse 08: Klima-/Heizungsel. (J255)       Labeldatei: 6R0-907-044.clb
   Teilenummer SW: 6J0 820 043 E    HW: 6J0 820 043 E
   Bauteil: Climatronic   H03 0808  
   Revision: S0000000    
   VCID: 261406FFE8EAB197C41-8072

Kein(e) Fehlercode(s) gefunden.

-------------------------------------------------------------------------------
Adresse 09: Zentralelektrik (J519)       Labeldatei:. DRV\7H0-937-08x-09.clb
   Teilenummer SW: 7H0 937 090 B    HW: 7H0 937 090 
   Bauteil: BCM PQ25 Max4 H74 0712  
   Revision: B9074001    Seriennummer: 0571 341130505
   Codierung: 7A8829E8A861010001200EF07E8B9FD80FC063A9608C2005200000020000
   Betriebsnr.: WSC 12345 123 123456
   VCID: 2D06F9D3CD1C82CF05B-8078

   Subsystem 1 - Teilenummer: 1K0 955 559 AH  Labeldatei: DRV\1K0-955-559-AG.CLB
   Bauteil: RLS 210311 05  54  0403 
   Codierung: 07302D

   Subsystem 2 - Teilenummer SW: 6R0 959 801 AJ    HW: 6R0 959 801 AJ  Labeldatei: 6R0-959-801.CLB
   Bauteil: J386__TSG_FT  006 5110 
   Seriennummer: 12202557130528011642
   Codierung: 020000

   Subsystem 3 - Teilenummer SW: 6R0 959 802 AQ    HW: 6R0 959 802 AQ  Labeldatei: 6R0-959-802.CLB
   Bauteil: J387__TSG_BT  006 5110 
   Seriennummer: 12202560130528060752
   Codierung: 020000

Kein(e) Fehlercode(s) gefunden.

-------------------------------------------------------------------------------
Adresse 15: Airbag (J234)       Labeldatei:| DRV\5K0-959-655.clb
   Teilenummer SW: 6R0 959 655 K    HW: 6R0 959 655 K
   Bauteil: VW10AirbagA09 H10 0020  
   Revision: --------    Seriennummer: 003GX01R7U4Z
   Codierung: 003039
   Betriebsnr.: WSC 00049 770 00111
   ASAM Datensatz: EV_AirbaVW10BPAVW250 A01001
   ROD: EV_AirbaVW10BPAVW250.rod
   VCID: 4ACC924F5C32B5F7009-801E

   Crashsensor für Seitenairbag Fahrerseite: 
   Seriennummer: 3495RRB400250GJ2OPQ.

   Crashsensor für Seitenairbag Beifahrerseite: 
   Seriennummer: 3505RRB401650HHORH3R

Kein(e) Fehlercode(s) gefunden.

-------------------------------------------------------------------------------
Adresse 17: Schalttafeleinsatz (J285)       Labeldatei:| DRV\5K0-920-xxx-17.clb-SRI1
   Teilenummer SW: 6J0 920 806 K    HW: 6J0 920 806 K
   Bauteil: KOMBI         H01 0709  
   Seriennummer: 00000000000000
   Codierung: 110E01
   Betriebsnr.: WSC 00049 770 00143
   ASAM Datensatz: EV_Kombi_UDS_VDD_RM09 A04723
   ROD: EV_Kombi_UDS_VDD_RM09_SK46.rod
   VCID: 3430ECB72EB6D3074A5-8060

Kein(e) Fehlercode(s) gefunden.

-------------------------------------------------------------------------------
Adresse 19: Diagnoseinterface (J533)       Labeldatei:. DRV\6N0-909-901-6R.clb
   Teilenummer SW: 6N0 909 901     HW: 7H0 937 090 
   Bauteil: GW-K-CAN TP20 H74 0712  
   Revision: B9074001    
   Codierung: 022200
   Betriebsnr.: WSC 12345 123 123456
   VCID: 70B820A71AAEAF276ED-8024

Kein(e) Fehlercode(s) gefunden.

-------------------------------------------------------------------------------
Adresse 25: Wegfahrsperre (J334)       Labeldatei:| DRV\5K0-920-xxx-25.clb
   Teilenummer SW: 5K0 953 234     HW: 5K0 953 234 
   Bauteil: IMMO          H01 0709  
   Seriennummer:               
   Codierung: 000000
   Betriebsnr.: WSC 00000 000 00000
   ASAM Datensatz: EV_Immo_UDS_VDD_RM09 A03710
   ROD: EV_Immo_UDS_VDD_RM09.rod
   VCID: 6A8C32CF3CF255F7209-803E

Kein(e) Fehlercode(s) gefunden.

-------------------------------------------------------------------------------
Adresse 44: Lenkhilfe        Labeldatei: DRV\6Q0-423-156.clb
   Teilenummer: 6R0 423 156 C
   Bauteil: LenkhilfeTRW        V278  
   Codierung: 11211
   Betriebsnr.: WSC 00049  
   VCID: 3038E0A7D36EEF272ED-8064

Kein(e) Fehlercode(s) gefunden.

-------------------------------------------------------------------------------
Adresse 4B: Multifunktionsstg.        Labeldatei: DRV\6J0-959-441.clb
   Teilenummer: 6J0 959 441 A
   Bauteil: MF-Modul       0007 0001  
   Codierung: 0000002
   Betriebsnr.: WSC 77005 000 00000
   VCID: 313EE5A3DD24E62F213-8064

Kein(e) Fehlercode(s) gefunden.

-------------------------------------------------------------------------------
Adresse 56: Radio (J503)       Labeldatei:. DRV\5M0-035-1xx-56.clb
   Teilenummer SW: 6J0 035 156     HW: 6J0 035 156 
   Bauteil: Radio         H07 0012  
   Revision: R0000000    Seriennummer: SEZAZ1N6256030
   Codierung: 010004080203
   Betriebsnr.: WSC 00049 770 00143
   VCID: 64905CF7DE5603871A5-8030

Kein(e) Fehlercode(s) gefunden.

Ende--------(Dauer: 01:03, Batt.-Spannung Start/Ende: 12.4V/12.4V)---------
User avatar
ciclo
Bling Bling Diamond Member
Posts: 5912
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R Rline/G7.5/Touareg Rline'19/T-Cr'20
Location: Earth ♥, Spain ☼
Contact:

Re: Seat Ibiza 6j Upgrading BCM and Auto light with CH/LH

Post by ciclo »

Excellent Skyscript!
Danke for the final report, autoscan, ... Perfekt !!!!!
With the same BCM coding I provided you, except DRLs coding (disabled), and CH/LH through foglights.

---
I guess your Ibiza didn't have the T17/3 wire for DRLs due to the type of Original light switch. It is just a thought.
Details as exhaustive as this are difficult to know within the immense amount of volkswangen vehicles for PQ25 platform around the world.
MIH11MI6
New
Posts: 1
Joined: Mon Oct 12, 2020 2:16 pm
Drives: 6J FR 2.0TDI
Location: Norwich, England

Re: Seat Ibiza 6j Upgrading BCM and Auto light with CH/LH

Post by MIH11MI6 »

Hi ciclo,

great work helping with this retrofit!

I previously had a Seat Ibiza 6J 1.2tdi CR Ecomotiv with Rain sensor, Auto lights and all (BCM 88). I completed an engine swap (2.0tdi) which forced me to revert to BCM 87. I have since then retrofitted the rain sensor, anti dazzle mirror.

I have a BCM 88 sitting here from my previous wiring system that I am looking to retrofit in. (BCM87D - BCM88D) to gain the auto light and CH/LH functionality again. I am hoping to follow this thread to complete this retrofit however I have an open point I was hoping you may be able to answer for me.

I have a set of custom built headlights, with Daytime running lights that run off the normal side light circuit. I used to have it so when CH/LH was activated at night, the side lights would come on, but I would also like the side lights to be on with ignition, when the light switch is set to the "AUTO" position. is this possible with an 88D BCM setup?

If you require any further info please let me know, I plan to begin the retrofit in the next couple days so will be able to get auto scans for you from VCDS if need be.

thanks

Matt
Post Reply