IMPORTANT ALL MEMBERS

All members need to read the following page The new General Data Protection Regulations 2018 (GDPR)

Failure to read and accept the new privacy policy may result in your account being deleted, so please take a quick read

Cheers

The UK-Polos.NET Admin Team

Kiogen's Ibiza SC

Forum to discuss the Seat Ibiza
Kiogen
New
Posts: 19
Joined: Sun Jan 15, 2017 9:31 pm
Drives: Seat Ibiza 6J
Location: Portugal

Kiogen's Ibiza SC

Post by Kiogen » Sat Jan 28, 2017 12:40 am

Hi, im new in the forum but have been watching for quite a while now, especially because the Polo guys are crazy with the mods.
I own an 2010 Ibiza SC 2.0 CRTDI and im trying to change a few things in it.
i dont have many pictures of it at the moment but as soon as i can i will post a few more.
i plan to mod it quite a bit but for that i will require some help from you guys.

OEM data:
Black Magic paint
Leather seats with red stitching and heated front seats
Full FR package
Bi-Xenon headlights with AFS
Auto dimming mirror
Rain and Light Sensor(light sensor is not activated from factory it only came as a package)
Heated screen washers
Folding mirros
ESP,Alarm,Hill control, rear parking assist,etc...

Mods:
Lowering- Done using Bilstein B12

Jet Screen washer: 5M0955986C 9B9
Image

FaceLift Led Pilots: 6J3945095Q 6J3945096Q
Led Facelift (Left) vs. OEM (Right)
Image

Cupra 6J speedometer trim: 6J0857059C AT7
OEM vs. Cupra
ImageImage

LED plate lights: 1K8943021C
Before vs. After
ImageImage

Vinyl Wrap front grill Gloss black
ImageImage

Velpic mats: 6J0061675041
Stubby aerial:PSA 6561.N3

Planned mods:
Glove Box light: Still to fit, already have the parts
Audi A1 airvents: my current ones look like cup holders
Red Seatbelts: Still to fit, already have the parts
Xenon with black background
Black interior trim: still collecting parts
AERO kit: spoiler and side skirts
Auto-folding mirrors when locking un-folding with ignition
Rain closing
Auto-Headlights
Cluster lights permanently lit

Planned Performance mods:
DPF removal (only if brings me problems)
EGR removal (only if brings me problems)

And as suggested by Ciclo here are the pictures of my relay box and fuse box layout:
Image
Image
Image

And my current Autoscan:

Code: Select all

Saturday,14,January,2017,18:33:03:05031
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x86
VCDS Version: 15.7.1.0
Data version: 20150904
www.Ross-Tech.com


VIN: VSSZZZ6JZBR00KIO License Plate: 
Mileage:   Repair Order: 


Chassis Type: 6J (6N0)
Scan: 01 03 08 09 10 15 17 19 25 44 4B 55 56

VIN: VSSZZZ6JZBR***KIO   Mileage:

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
4B-Multifunc. Module -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
56-Radio -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine (J623-CFHD)       Labels: 03L-906-018-CFF.clb
   Part No SW: 03L 906 018 A    HW: 03L 906 018 A
   Component: R4 2,0L EDC   H21 6749  
   Revision: 43H21---    Serial number:               
   Coding: 00190012042400080000
   Shop #: WSC 99999 1023 2097151
   ASAM Dataset: EV_ECM20TDI01103L906018A 003003
   ROD: EV_ECM20TDI01103L906018A.rod
   VCID: 2858608F53E0BC7E35-807C

No fault code found.
Readiness: 0 0 0 0 1 

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 6R0-907-37x-ESP82.clb
   Part No SW: 6R0 907 379 R    HW: 6R0 907 379 R
   Component: ESP8.2i front H04 0002  
   Revision: --------    
   Coding: 110248DB836D00B8882D12E3C1D800421700
   Shop #: WSC 04941 000 00000
   VCID: 4D96F11B10C2B956E6-8018

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255)       Labels: 6R0-907-044.clb
   Part No SW: 6J0 820 043 A    HW: 6J0 820 043 A
   Component: Climatronic   H07 0404  
   Revision: S0000000    
   VCID: 224C72A73DDC562E6B-8076

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels: 6R0-937-08x-09.clb
   Part No SW: 6R0 937 087 F    HW: 6R0 937 087 
   Component: BCM PQ25 H+4  H46 0221  
   Revision: BF046001    Serial number: 0345 142100668
   Coding: 3C8829EF886125009B2000007E0B1FD80080420F608C0000200000000000
   Shop #: WSC 64564 324 38760
   VCID: 4088D82FD390643E1D-8014

   Subsystem 1 - Part No: 1K0 955 559 AH  Labels: 1K0-955-559-AG.CLB
   Component: RLS 100510 05  54  0403 
   Coding: 03302D

   Subsystem 2 - Part No SW: 6R0 959 801 N    HW: 6R0 959 801 N  Labels: 6R0-959-801.CLB
   Component: J386__TSG_FT  003 3130 
   Coding: 020000

   Subsystem 3 - Part No SW: 6R0 959 802 Q    HW: 6R0 959 802 Q  Labels: 6R0-959-802.CLB
   Component: J387__TSG_BT  003 3130 
   Coding: 020000

   Subsystem 4 - Part No: 1K8 951 171 A
   Component: DWA-Sensor 00  001 0103 
   Coding: 000000

   Subsystem 5 - Part No: 1K8 951 605 A
   Component: LIN BACKUP HO  H11 9004 
   Coding: 000000

   Subsystem 6 - Part No SW: 6R0 959 591     HW: 6R0 959 591 
   Component: J245/J878  H04 0054 
   Coding: 000003

   Subsystem 7 - Part No: 1K8 951 171 A
   Component: DWA-Sensor 00  001 0103 
   Coding: 000000

No fault code found.

-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels: 6J0-919-475.clb
   Part No SW: 6J0 919 475 B    HW: 6J0 919 475 B
   Component: PARKHILFE 4K  H07 0008  
   Revision: --------    Serial number: 80331011906889
   Coding: 000003
   Shop #: WSC 06402 785 00200
   ASAM Dataset: EV_SE250ParkiAssis2 S01006
   ROD: EV_SE250ParkiAssis2.rod
   VCID: 3566B9FB9452D196BE-8060

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels: 5K0-959-655.clb
   Part No SW: 6R0 959 655 M    HW: 6R0 959 655 M
   Component: VW10AirbagA09 H08 0020  
   Revision: --------    Serial number: 003GZ00019BW
   Coding: 003039
   Shop #: WSC 06402 785 00200
   ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
   ROD: EV_AirbaVW10BPAVW250_SE25.rod
   VCID: 4C90FC1FE7D8B05EF1-8018

   Crash sensor for side airbag; driver side: 
   Serial number: 3495RRB404R6QGG0M9CD

   Crash sensor for side airbag; front passenger side: 
   Serial number: 3505RRB405F6Q5E63GPV

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels: 5K0-920-xxx-17.clb
   Part No SW: 6J0 920 802 C    HW: 6J0 920 802 C
   Component: KOMBI         H05 0404  
   Serial number: 00000000000000
   Coding: 110A00
   Shop #: WSC 99999 1023 2097151
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04086
   ROD: EV_Kombi_UDS_VDD_RM09_SE25.rod
   VCID: 2858608F53E0BC7E35-807C

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels: 6N0-909-901-6R.clb
   Part No SW: 6N0 909 901     HW: 6R0 937 087 
   Component: GW-K-CAN TP20 0221  
   Coding: 422000
   Shop #: WSC 64564 324 38760
   VCID: 70E848EFA3B0B4BEAD-8024

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels: 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234 
   Component: IMMO          H05 0404  
   Serial number:               
   Coding: 000000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03008
   ROD: EV_Immo_UDS_VDD_RM09_SE25.rod
   VCID: 6ADC5A878D6C4E6EE3-803E

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist        Labels: 6Q0-423-156.clb
   Part No: 6R0 423 156 B
   Component: LenkhilfeTRW        V277  
   Coding: 11221
   Shop #: WSC 06402  
   VCID: 2F6A8B93EA0EEB46F4-807A

No fault code found.

-------------------------------------------------------------------------------
Address 4B: Multifunc. Module        Labels: None
   Part No: 6J0 959 441 
   Component: MF-Modul       0007 0001  
   Coding: 0000001
   Shop #: WSC 77005 000 00000
   VCID: 70E848EF63B0B4BEAD-8024

No fault code found.

-------------------------------------------------------------------------------
Address 55: Headlight Range        Labels: 7L6-907-357-A.lbl
   Part No SW: 7L6 907 357 C    HW: 7L6 907 357 C
   Component: AFS-Steuergeraet    0143  
   Revision: 00H04000    Serial number:               
   Coding: 2688068
   Shop #: WSC 06402 785 00200
   VCID: 3B72AFC37E7607E648-806E

   Subsystem 1 - Part No: 7L6 941 329 C  Labels: 3D0-941-329.CLB
   Component: AFS-Lst.-Modul l    0004  
   Coding: 00000041

   Subsystem 2 - Part No: 7L6 941 329 C  Labels: 3D0-941-329.CLB
   Component: AFS-Lst.-Modul r    0004  
   Coding: 00000041

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio (J503)       Labels: 6J0-035-153.clb
   Part No SW: 6J0 035 153 B    HW: 6J0 035 153 B
   Component: Radio G3 UL   H58 0058  
   Revision: 0H001001    Serial number: SEZ1Z2K6507195
   Coding: 0502040002
   Shop #: WSC 04941 000 00000
   VCID: 234277A322C65F2660-8076

No fault code found.

User avatar
ciclo
Bling Bling Diamond Member
Posts: 4317
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R '13
Location: Earth ♥, Spain ☼
Contact:

Re: Kiogen's Ibiza SC

Post by ciclo » Sat Jan 28, 2017 11:22 am

Welcome (again). :)
Nice FR, it has to be a rocket with that engine. (not available in Polo 6R :evil: :lol: )

I subscribe to this topic, I think we will have a good time here.

You should keep in mind that my way of proceeding will be for you to make a complete wiring loom. With the aim of having all the wires organized in a same loom.

Kiogen
New
Posts: 19
Joined: Sun Jan 15, 2017 9:31 pm
Drives: Seat Ibiza 6J
Location: Portugal

Re: Kiogen's Ibiza SC

Post by Kiogen » Sat Jan 28, 2017 7:09 pm

ciclo wrote:Welcome (again). :)
Nice FR, it has to be a rocket with that engine. (not available in Polo 6R :evil: :lol: )
Well, it is fun but sometimes i want more power, it "only" goes till 200km/h, it's locked electronically.
It does a bit of torque steer when pushed hard, bit it can be improved with VCDS locking a bit more the XDS and giving it a stronger wheel setting as you have done on yours.
ciclo wrote:You should keep in mind that my way of proceeding will be for you to make a complete wiring loom. With the aim of having all the wires organized in a same loom.
When i started i wanted everything as OEM as possible, and i wanted to have all the wiring inside the original wrapping, like it was factory fitted, now i understand that it is impossible and an suplemmentary wiring is the way to go, and i can live with that. 8)

Kiogen
New
Posts: 19
Joined: Sun Jan 15, 2017 9:31 pm
Drives: Seat Ibiza 6J
Location: Portugal

Re: Kiogen's Ibiza SC

Post by Kiogen » Sun Jan 29, 2017 10:51 pm

So, my journey to get automatic headlights is on its way and i've crossed the wiring of 4 different base equipments so far. :shock:

Here is the image of what i've done:
Image

and here is the finished work:
Image
Image
Image

I've seen that i have to delete some bridges and two relays?? then i must add another full hand of cables to the proper places, i'll study it deeper when i can, just leaving the info here if someone can get me a hand i would be very grateful.

i think that the 133vs134 is not correct because i get confused with all the Start/Stop System and what it adds to the car, so on the 191vs192 i left it all intact, therefor i know that i haven't deleted nothing important to reach the goal :roll:

Kiogen
New
Posts: 19
Joined: Sun Jan 15, 2017 9:31 pm
Drives: Seat Ibiza 6J
Location: Portugal

Re: Kiogen's Ibiza SC

Post by Kiogen » Sun Jan 29, 2017 10:56 pm

If someone is interested in getting the LED plate lights i must add that to get them to work i've changed the polarity on the plug, i dont know if now i have to change it again because with the auto headlights the plate lights are controled by the BCM and not with fuse like it is now...

When i finish the wiring and install it i'ill tell if it needs any change 8)

User avatar
ciclo
Bling Bling Diamond Member
Posts: 4317
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R '13
Location: Earth ♥, Spain ☼
Contact:

Re: Kiogen's Ibiza SC

Post by ciclo » Mon Jan 30, 2017 6:29 pm

Yes, for the license plate lights (LED) you will have to replace the wires as original, now the power signal will be direct from the new BCM.

This week I am extremely busy, but I will download the diagrams you have made to take a look at them. :wink:
Or maybe I'll prepare some new diagrams (with before and after) for your Ibiza SC (a bit special in wiring configuration).

Please do not delete any information that you have published, it will facilitate the checks that I will make. Thanks.

Kiogen
New
Posts: 19
Joined: Sun Jan 15, 2017 9:31 pm
Drives: Seat Ibiza 6J
Location: Portugal

Re: Kiogen's Ibiza SC

Post by Kiogen » Mon Jan 30, 2017 9:51 pm

Thank you,on the mean time i will do the chapter 134 and 133 again to check if i missed something, right now its impossible for me.

Kiogen
New
Posts: 19
Joined: Sun Jan 15, 2017 9:31 pm
Drives: Seat Ibiza 6J
Location: Portugal

Re: Kiogen's Ibiza SC

Post by Kiogen » Wed Feb 01, 2017 2:00 am

Just posting the new made, chapter 133vs134, this time i left the Start/Stop system there to get less troubles with missing information, just by doing this i already seen some changes that i will have to make, and i have seen that i will have to cross this one with the xenon chapter(166 or 167) to see all the wires that i have to add. :D

Image

Thank you Ciclo for your help, if you don't have time i understand and i will do my best to try to solve it by myself, i will be posting my own conclusions and if you pass your eyes in them i know that you will find my mistakes. 8)

User avatar
ciclo
Bling Bling Diamond Member
Posts: 4317
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R '13
Location: Earth ♥, Spain ☼
Contact:

Re: Kiogen's Ibiza SC

Post by ciclo » Wed Feb 01, 2017 10:24 am

7H0937089D Z0H
7H0937089F Z0E
7H0937089F Z3E
7H0937089F Z3W
7H0937089H Z08

This is one of the BCMs that you must buy (according to ETKA). Any of them.

I have already reviewed all the diagrams, for me it is clear how all wiring installation should be, the problem is how I explain it to you without having made diagrams. :) (Requires time as you already know).

This week (casually and specially) I have a lot of work, and I do not have enough time to do the diagrams.
Actually, the process is quite simple and similar as for the Polo 6R. (in my mind at least)
Most of the wires end up installed as for the Polo 6R and other models belonging to the PQ25 platform. The problem or advantage from the Ibiza 6J is that there is (exist) a light switch with the AUTO position (this does not happen in all other models).

To begin you will have to disassemble these three relays forever (image bellow). Its functions are managed by the new BCM due to the new wires configuration, only and exclusively when you are installing the new electrical installation, logically. This is part of the wiring adaptation to the new BCM Max.
Image

I hope to have some more time next week to make your diagrams. :wink:

Kiogen
New
Posts: 19
Joined: Sun Jan 15, 2017 9:31 pm
Drives: Seat Ibiza 6J
Location: Portugal

Re: Kiogen's Ibiza SC

Post by Kiogen » Thu Feb 02, 2017 2:22 pm

WOW! now i just lost myself with the diagrams :(, you say that i need to remove the relays but i've been comparing the Chapter 133(supposedly mine) with the 191(supposedly with auto headlights) and it has both relays but with connections to the new BCM. :? i may be doing something wrong or maybe is just the lack of knowlege but in my mind i was thinking that it didn't need to do that.

I think that i have time to check a few things and maybe try to do a full diagram, will post it for you when done.
Image

By doing it you can also see if im getting my ideas right.

User avatar
ciclo
Bling Bling Diamond Member
Posts: 4317
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R '13
Location: Earth ♥, Spain ☼
Contact:

Re: Kiogen's Ibiza SC

Post by ciclo » Thu Feb 02, 2017 6:21 pm

Someone had the great idea to put the same name to a relay with a similar but not equal functions. :mrgreen:
Do not worry, these and other things are common in Elsawin. :)

This is your relay J828 (chapter 166). IBIZA SC model year 'B' Bixenon Headlights with BCM High (not Max) from factory.

Image

The relay J828 from diagram that you show is not possible in your 6J SC because a BCM Max would be needed. And you have a BCM High from the factory (without T73a/1 pin, etc...)

---

1 BCM wiring adaptation

- Low Beam, High Beam and DRL's you have to convert your original wiring from chapter 166 to the wiring of chapter 167.
Blinkers (turn signals) and Parking/side lights you don't have to do anything.

- (Rest of lights) License plate, Rear fog, Dimmer and Reverse: you have to convert your original wiring (lights only) from chapter 133 to the wiring of chapter 134. (easier to understand than using Chapter 191)

2 Automatic lights + CH/LH (through BCM Max)

- Use chapter 192 in reference to relay J828 and the light switch. (192/8, 192/9)

---

If you do exactly this, everything will work like a charm on your 6J. :wink:

---
Some help :)

Image
And put the electric bridge on the J331 relay adapter.

:arrow: 6J IBIZA - SC 57,58 = 6R POLO - SB 39,59


DRLs

Image

Kiogen
New
Posts: 19
Joined: Sun Jan 15, 2017 9:31 pm
Drives: Seat Ibiza 6J
Location: Portugal

Re: Kiogen's Ibiza SC

Post by Kiogen » Thu Feb 02, 2017 10:24 pm

ciclo wrote:Someone had the great idea to put the same name to a relay with a similar but not equal functions. :mrgreen:
Do not worry, these and other things are common in Elsawin. :)
Really nice to know that... :evil: it does help me a lot...
ciclo wrote: This is your relay J828 (chapter 166). IBIZA SC model year 'B' Bixenon Headlights with BCM High (not Max) from factory.

Image

The relay J828 from diagram that you show is not possible in your 6J SC because a BCM Max would be needed. And you have a BCM High from the factory (without T73a/1 pin, etc...)
I do understand that the diagram that i posted is not from my model, i was thinking is that it belongs to a model with auto headlights, therefor as it have the same relay as mine it wasn't needed to be removed, but getting a new BCM isn't the starting point for me??

With a BCM 7H0 937 089F(for example) i would have available pin T73a/1 which is the one that connects to J828...

I appreciate your time with my problems and i'm sorry to be asking so many questions but i just want to get clear answers so i can get peace of mind to start butchering my car wiring :D

----Edit----
I haven't take a good look at your diagrams and explanation yet, but from at I've seen it isn't that hard do do. But I'm still not fully aware so will dig it a bit further to see if I can reach the same conclusion as you. :mrgreen:

Maybe in the weekend I can do a bit of research and make a final diagram.

So there is two relays named J828 in one car or is because of the different specs?
I will have one J828 according to your explanations but in the fuse picture you state that I should remove all three :?

Honestly I consider myself as a smart handy guy but with this my mind is just blocked, perhaps im just missing the "click" and then it all gets clear.

User avatar
ciclo
Bling Bling Diamond Member
Posts: 4317
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R '13
Location: Earth ♥, Spain ☼
Contact:

Re: Kiogen's Ibiza SC

Post by ciclo » Fri Feb 03, 2017 4:15 pm

Kiogen wrote: Honestly I consider myself as a smart handy guy but with this my mind is just blocked, perhaps im just missing the "click" and then it all gets clear.
ciclo wrote: If you do exactly this, everything will work like a charm on your 6J. :wink:
viewtopic.php?p=517773#p517765 :arrow: (1,2)

NOTE:
You must use +30 power to feed the new J828 relay, in Elsawin diagrams (chapter 192) this new relay is powered by +15.

-------------

To understand the diagrams it is also necessary to know how your new BCM Max will work when coded correctly. :)

Kiogen
New
Posts: 19
Joined: Sun Jan 15, 2017 9:31 pm
Drives: Seat Ibiza 6J
Location: Portugal

Re: Kiogen's Ibiza SC

Post by Kiogen » Sun Feb 05, 2017 1:26 pm

ciclo wrote:
NOTE:
You must use +30 power to feed the new J828 relay, in Elsawin diagrams (chapter 192) this new relay is powered by +15.

-------------

To understand the diagrams it is also necessary to know how your new BCM Max will work when coded correctly. :)
I haven't quite understood the new relay yet, the others i thing that everything is correct.

Why do i have to follow chapeter 192 insted of 167 in this case? do i really need a new J828? what is his function?

What is the third relay that you want me to remove? Am i missing something?

I've been studying the wirings and these are the conclusions that i took:

-----Headlights-----
--Low beam--
-OEM
A40 to T10m/32(j331)
T10m/52(j331) to A9
A9 to SC57a, SC58a
SC57b to T14b/6
SC58b to T15a/6

-AUTO
A40 to B169
B169 connects to SC57a and SC58a
SC57b to T73a/63.T73b/2 to T14b/6
SC58b to T73b/68.T73a/2 to T14a/6

--High beam--
-OEM
T41/39 to B141
B141 to SC36a, SC37a and T10d/1(J828)
SC36b to T14b/11
Sc37b to A95
A95 to T14a/11 and T32/14

-AUTO
T41/39 to SC36a
SC36b to A223
A223 to T73a/62, T14a/11, T14b/11 and T32/14

B141+A95 almost same as A223, it gets diffrent fuses for different lamps as if factory fitted it only gets one fuse for both.

T17/7 triggers J331 if it has power, so T17/7 is light on, triggering J331 lighting up the xenon low beam.
T41/39 triggers J828 that will trigger J331 feeding A40 to A9 and that lights up the xenon high beam if light are off.
T41/39 is High beam contoller only, it trigers the relays and V294 and V295, xenon high beam "motors".

If J331 is removed and bridge between T10m/32 and T10m/52 forms B169? So A9=B169
Because J331 is not present T10d/3(j828) wil not get power anywhere, so T17/7 to T10d/4 is not necessary also T10d/1 is not necessary.
B169 to T10d/5 same. J828 may be removed. what happens to T17/7?

-----DRL-----
-OEM
T17/3 to A83
A83 to SF16a and SF17a
SF16b to T14a/12
SF17b to T14b/12

-AUTO
T73b/3 to T14a/12
T73a/5 to T14b/12

May connect SF16a to T73b/3 and SF17a to T73a/5
T17/3 should be removed?

-----Rear Fog-----
-OEM
T17/9 to SC7a
SC7b to A88
A88 to T6d/6 and T32/13

-AUTO
T17/9 to T73b/43
T73a/6 to A88

May connect T73a/6 to SC7b, and T73b/43 to SC7a but have to remove the fuse.
or can do T73a/6 to SC7a and direct wire between T17/9 and T73b/43 (less danger)and this way A88 is fused

-----Reverse-----
-OEM
T73b/48 to A87
A87 to B182
B182 to T6e/4

-AUTO
Bridge between A87 to B182 removed
T73b/12 to B182

-----Dimmer-----
-OEM
T73a/45 to SC17a and T17/16
SC17b to T6f/3

-AUTO
T73b/1 to T6f/3

Remove wire from SC17b and do as AUTO indicates

-----Plate light-----
-OEM
T73a/45 to SC17a and T17/16
SC17b to W2(double light)

-AUTO
T73b/7 to W2(double light)

Remove wires from SC17b and do as AUTO indicates
I may remove SC17a wires and solder both to get direct connection to T73a/45 and T17/16 and can pass wire T73b/7 to SC17b and it gets fused.

-----
Apart from this i must change T17/16 to T17/13 and T73a/37 must connect to T17/12 and T17/16
That i already have done.

If factory fitted with BCM Max the plate light, rear fog and drl are not fused?

I will do diagram charts when everything is correct just to make it clear for anyone else.

Kiogen
New
Posts: 19
Joined: Sun Jan 15, 2017 9:31 pm
Drives: Seat Ibiza 6J
Location: Portugal

Re: Kiogen's Ibiza SC

Post by Kiogen » Sun Feb 05, 2017 9:22 pm

ciclo wrote: DRLs
Image
New Update
Spent my late afternoon doing some diagrams to compare between each parts that will suffer modifications and can't find the T73b/29 in any of the Ibiza diagrams.
the only one that i haven't done is the main one, the Headlights, as i haven't understand it fully. All the other will be posted.

DRL
Image

Rear Fog
Image

Reverse light
Image

Plate lights and Dimmer for interior lights
Image

Post Reply