UK-POLOS.NET - THE VW Polo Forum

Hello every body.

After a successful installation of Max Bcm in Skoda Fabia Vrs 1.4 tsi MY 2012 , always with help and support of Fernando (ciclo) , the time comes to start using

the abilities of new module.

1)Foot lights plus interior lighting with ambient function . Is there any complete kit ready to install ?

2)Is it possible to know any one part numbers for extra lights in A-B pillar left and right? Part numbers for handle illumination lights (Fabia interior is very-very dark at night , some times it is difficult to find the door handle at night ).

3)Is it difficult to install 8w8 interior lights with cat-eyes ?

4)My car does not have rear passengers light , is it possible light installation ?

Best regards
Vasilis

VASILEIOS1972 wrote: ↑Sat Sep 07, 2019 1:46 pm 4)My car does not have rear passengers light , is it possible light installation ?

If you feel comfortable cutting into the factory roof liner, here are the factory lighting options
https://skoda.7zap.com/en/cz/fabia/fab/ ... -947000/#9

1 - not that i'm aware of, but I heard about this one: https://www.x2car.de/Fussraumbeleuchtun ... Seat-Skoda
2 - not that i'm aware of
3 - it's not very difficult in the headliner with only a light at the front. if you have the light at the front and rear, it's not possible
4 - see above

exantas wrote: ↑Sat Sep 07, 2019 9:06 pm

VASILEIOS1972 wrote: ↑Sat Sep 07, 2019 1:46 pm 4)My car does not have rear passengers light , is it possible light installation ?

If you feel comfortable cutting into the factory roof liner, here are the factory lighting options
https://skoda.7zap.com/en/cz/fabia/fab/ ... -947000/#9

thank you my friend

iichel wrote: ↑Sat Sep 07, 2019 9:15 pm 1 - not that i'm aware of, but I heard about this one: https://www.x2car.de/Fussraumbeleuchtun ... Seat-Skoda
2 - not that i'm aware of
3 - it's not very difficult in the headliner with only a light at the front. if you have the light at the front and rear, it's not possible
4 - see above

Hello my friend and thank you for the response , tell me please bcm max does not support footlights?

kind regards
Vasilis

Not the way you want them, no

iichel wrote: ↑Sun Sep 08, 2019 7:16 am Not the way you want them, no

I am confused , saw ciclos thread above at the end , are those foot lights that he has installed ?

viewtopic.php?f=56&t=58703&start=4710#p556790

Re: Auto lights retrofit
Report
Quote





Post by ciclo » Thu Sep 26, 2019 3:57 am

Footwell lights (OEM)
T73a/65 + ve
T73a/4 -ve
These wires are present in the dome lights and therefore in the A-pillar, which is a better place than the BCM to make the splices.
It is not necessary to add a fuse, it is already present in the original installation.


Ambient lights
Use LED lights with very low consumption, add a fuse (mandatory).
This consumption is added to the LEDs/lights of the switches.
+ ve. where indicated in the previous image for Adapter (6R Dimmer/HRR).
- ve. any ground point near to the added lamp.

viewtopic.php?f=41&t=73355&p=561400#p561400

Hello my friend Fernando , I have some questions above

1) in pillar A , do you know in which pin place are those 2 wires ? Do you want to get a photo from pillar A? After that needed coding in bcm ?

2) When I say about ambient light I mean foot lights and coding them in bcm as ambient lightning (as pq35 platform)

3) About foot well lights , do you know complete kit or part numbers to purchase ?

4) 8w8 interior light with cat eyes , power for cat eyes (red led ) took from head light switch ? Which pin ?

5) door handle illumination , from which car I can choose , I would like white colour led

Best regards
Vasilis

Hello Fernando , what is your opinion for the led foot lights above?

free picture hosting for ebay

Best regards
Vasilis