IMPORTANT ALL MEMBERS

All members need to read the following page The new General Data Protection Regulations 2018 (GDPR)

Failure to read and accept the new privacy policy may result in your account being deleted, so please take a quick read

Cheers

The UK-Polos.NET Admin Team

Removing the factory fitted iPhone cradle.

Chat about your facelift 9n3 Polo - Including the 9N3 Polo GTI!
Post Reply
RogerStringpiece
New
Posts: 5
Joined: Wed May 23, 2018 6:43 pm
Drives: Polo Match 2008
Location: Wigan

Removing the factory fitted iPhone cradle.

Post by RogerStringpiece » Wed May 23, 2018 6:45 pm

Hi! New to the forums and I've just bought myself an 08 Polo Match.

I was wondering if it's possible to remove the factory fitted iPhone cradle and blank of the space it leaves behind? I've had a search of the internet and found nothing so far. Ant help appreciated. Cheers!

User avatar
alexperkins
Site Admin
Posts: 14167
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 67 Q7
Location: Poole, Dorset, UK.
Contact:

Re: Removing the factory fitted iPhone cradle.

Post by alexperkins » Wed May 23, 2018 7:25 pm

Can you pop a photo up of this iphone cradle you see? Sounds like an aftermarket part

RogerStringpiece
New
Posts: 5
Joined: Wed May 23, 2018 6:43 pm
Drives: Polo Match 2008
Location: Wigan

Re: Removing the factory fitted iPhone cradle.

Post by RogerStringpiece » Wed May 23, 2018 8:00 pm

It's the same as this one

Image

User avatar
alexperkins
Site Admin
Posts: 14167
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 67 Q7
Location: Poole, Dorset, UK.
Contact:

Re: Removing the factory fitted iPhone cradle.

Post by alexperkins » Wed May 23, 2018 8:02 pm

Ok so that’s a third party mount. Possibly Brodit

The blank to replace it is readily available from the dealer or TPS. Would you like the part number?

RogerStringpiece
New
Posts: 5
Joined: Wed May 23, 2018 6:43 pm
Drives: Polo Match 2008
Location: Wigan

Re: Removing the factory fitted iPhone cradle.

Post by RogerStringpiece » Wed May 23, 2018 8:32 pm

Ah right, thank you. Yes please, the part number would be great.

User avatar
alexperkins
Site Admin
Posts: 14167
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 67 Q7
Location: Poole, Dorset, UK.
Contact:

Re: Removing the factory fitted iPhone cradle.

Post by alexperkins » Wed May 23, 2018 8:35 pm

6Q2858373 Is the blank with two card slots :)

RogerStringpiece
New
Posts: 5
Joined: Wed May 23, 2018 6:43 pm
Drives: Polo Match 2008
Location: Wigan

Re: Removing the factory fitted iPhone cradle.

Post by RogerStringpiece » Wed May 23, 2018 9:04 pm

Thank you very much. Appreciate it!

Post Reply