Page 1 of 1
Removing the factory fitted iPhone cradle.
Posted: Wed May 23, 2018 6:45 pm
by RogerStringpiece
Hi! New to the forums and I've just bought myself an 08 Polo Match.
I was wondering if it's possible to remove the factory fitted iPhone cradle and blank of the space it leaves behind? I've had a search of the internet and found nothing so far. Ant help appreciated. Cheers!
Re: Removing the factory fitted iPhone cradle.
Posted: Wed May 23, 2018 7:25 pm
by alexperkins
Can you pop a photo up of this iphone cradle you see? Sounds like an aftermarket part
Re: Removing the factory fitted iPhone cradle.
Posted: Wed May 23, 2018 8:00 pm
by RogerStringpiece
It's the same as this one
Re: Removing the factory fitted iPhone cradle.
Posted: Wed May 23, 2018 8:02 pm
by alexperkins
Ok so that’s a third party mount. Possibly Brodit
The blank to replace it is readily available from the dealer or TPS. Would you like the part number?
Re: Removing the factory fitted iPhone cradle.
Posted: Wed May 23, 2018 8:32 pm
by RogerStringpiece
Ah right, thank you. Yes please, the part number would be great.
Re: Removing the factory fitted iPhone cradle.
Posted: Wed May 23, 2018 8:35 pm
by alexperkins
6Q2858373 Is the blank with two card slots
Re: Removing the factory fitted iPhone cradle.
Posted: Wed May 23, 2018 9:04 pm
by RogerStringpiece
Thank you very much. Appreciate it!