RCD200-RMT100
Posted: Tue Mar 24, 2020 12:20 pm
Hi all,
started to tinker with daughters 9N3 and looking for some wiring advice (i've tried search honestly ) to update her RCD200 with a bought RMT 100 Unit.
I'm struggling for the SAFE AND CAN connections to the new unit. I'd also like to know if the undocumented CAN wire from the current unit is important
I've searched high and low for pin-outs for the RMT100 so if anyone has them i'd be very grateful
Here is the current Unknown CAN wire on current unit Here is my logic so far Also any idea what the blue connector is for as I only need the Fakra join thanks all
f5
started to tinker with daughters 9N3 and looking for some wiring advice (i've tried search honestly ) to update her RCD200 with a bought RMT 100 Unit.
I'm struggling for the SAFE AND CAN connections to the new unit. I'd also like to know if the undocumented CAN wire from the current unit is important
I've searched high and low for pin-outs for the RMT100 so if anyone has them i'd be very grateful
Here is the current Unknown CAN wire on current unit Here is my logic so far Also any idea what the blue connector is for as I only need the Fakra join thanks all
f5