IMPORTANT ALL MEMBERS

All members need to read the following page The new General Data Protection Regulations 2018 (GDPR)

Failure to read and accept the new privacy policy may result in your account being deleted, so please take a quick read

Cheers

The UK-Polos.NET Admin Team

Gt 1.3 mpi engine conversion wiring issues

Chat about your MKIII (86C) inc GT/G40 Polo
Post Reply
Harts city hotrods
New
Posts: 2
Joined: Sun Jun 03, 2018 9:23 pm
Drives: Mk2f polo bready
Location: Watford

Gt 1.3 mpi engine conversion wiring issues

Post by Harts city hotrods » Sun Jun 03, 2018 9:53 pm

Hi all I have a 1992 Mk2f polo that I am doing a engine conversion from a 1.0 spi to a 1.3 mpi.i have the complete loom and Ecu for engine. I have connected all the wiring loom except one 6 pin plug and one two pin plug from distributor. The Haynes manual says it goes to the Ecu but I can’t find anywhere for it to go. Does anybody know what I should do.
Cheers
C8F55C1D-56C2-49D3-902D-50653A02FB34.jpeg
2 pin and 6 pin from dizzy

Harts city hotrods
New
Posts: 2
Joined: Sun Jun 03, 2018 9:23 pm
Drives: Mk2f polo bready
Location: Watford

Re: Gt 1.3 mpi engine conversion wiring issues

Post by Harts city hotrods » Sun Jun 03, 2018 9:55 pm

Sorry one 6 pin plug and one 3 pin plug

User avatar
alexperkins
Site Admin
Posts: 14298
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 67 Q7
Location: Poole, Dorset, UK.
Contact:

Re: Gt 1.3 mpi engine conversion wiring issues

Post by alexperkins » Tue Jun 05, 2018 5:29 pm

Those are pretty thick wires so itll be a high current job whatever they are doing. Where on the loom are they, and where do they branch out from?

Post Reply