Gt 1.3 mpi engine conversion wiring issues

Chat about your MKIII (86C) inc GT/G40 Polo
Post Reply
Harts city hotrods
New
Posts: 2
Joined: Sun Jun 03, 2018 9:23 pm
Drives: Mk2f polo bready
Location: Watford

Gt 1.3 mpi engine conversion wiring issues

Post by Harts city hotrods » Sun Jun 03, 2018 9:53 pm

Hi all I have a 1992 Mk2f polo that I am doing a engine conversion from a 1.0 spi to a 1.3 mpi.i have the complete loom and Ecu for engine. I have connected all the wiring loom except one 6 pin plug and one two pin plug from distributor. The Haynes manual says it goes to the Ecu but I can’t find anywhere for it to go. Does anybody know what I should do.
Cheers
C8F55C1D-56C2-49D3-902D-50653A02FB34.jpeg
2 pin and 6 pin from dizzy

Harts city hotrods
New
Posts: 2
Joined: Sun Jun 03, 2018 9:23 pm
Drives: Mk2f polo bready
Location: Watford

Re: Gt 1.3 mpi engine conversion wiring issues

Post by Harts city hotrods » Sun Jun 03, 2018 9:55 pm

Sorry one 6 pin plug and one 3 pin plug

User avatar
alexperkins
Site Admin
Posts: 14328
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 67 Q7
Location: Poole, Dorset, UK.
Contact:

Re: Gt 1.3 mpi engine conversion wiring issues

Post by alexperkins » Tue Jun 05, 2018 5:29 pm

Those are pretty thick wires so itll be a high current job whatever they are doing. Where on the loom are they, and where do they branch out from?

Post Reply