6R 2010, metal pins for Quadlock and fusebox

Chat about your 6R/6C model Polos here!
Post Reply
exantas
New
Posts: 20
Joined: Sun Jan 06, 2019 5:14 pm
Drives: Skoda Fabia 5J
Location: Iceland / Greece

6R 2010, metal pins for Quadlock and fusebox

Post by exantas » Sun Mar 10, 2019 8:57 am

Does anybody know the code/type of the metal pins that are used for the oem radio quadlock on 2010 6R polo?
Image

I am looking the codes for both male and female pins.

Also does anybody know the codes for the female pins used on the fuse box under the steering wheel?
I looking the female pins for locations 1-24 and 25-60
Image

Theo

iichel
Bling Bling Diamond Member
Posts: 3205
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 1.2 TDI
Location: kessiichel is everywhere :)

Post by iichel » Sun Mar 10, 2019 9:24 am

Quadlock: Junior power timer
1-24: Junior power timer
25-60: Standard power timer

https://www.a4-freunde.com/showwiki.php ... uebersicht

exantas
New
Posts: 20
Joined: Sun Jan 06, 2019 5:14 pm
Drives: Skoda Fabia 5J
Location: Iceland / Greece

Re: 6R 2010, metal pins for Quadlock and fusebox

Post by exantas » Sun Mar 10, 2019 11:08 am

Thank you for the quick reply

Dink
Gold Member
Posts: 862
Joined: Fri Sep 28, 2007 9:04 am
Drives: 2015 GTI
Location: Cwmbran, South wales

Re:

Post by Dink » Thu Mar 14, 2019 1:32 pm

iichel wrote:
Sun Mar 10, 2019 9:24 am
Quadlock: Junior power timer
1-24: Junior power timer
25-60: Standard power timer

https://www.a4-freunde.com/showwiki.php ... uebersicht
Can you recommend a decent crimper for these?

I'm looking to install a few things in my car and would like to use the correct parts.

ciclo
Bling Bling Diamond Member
Posts: 4896
Joined: Sun Feb 24, 2013 10:20 am
Drives: Polo 6R '13 / Golf MK7.5 '19
Location: Earth ♥, Spain ☼
Contact:

Re: 6R 2010, metal pins for Quadlock and fusebox

Post by ciclo » Fri Mar 15, 2019 3:44 am


Dink
Gold Member
Posts: 862
Joined: Fri Sep 28, 2007 9:04 am
Drives: 2015 GTI
Location: Cwmbran, South wales

Re: 6R 2010, metal pins for Quadlock and fusebox

Post by Dink » Fri Mar 15, 2019 12:02 pm

No good for me far too small only goes up to AWG 18 which is like 1mm2 which is where I'd like it to start.

Lktuning
New
Posts: 22
Joined: Fri Jan 18, 2019 6:35 am
Drives: Vw Polo 6C 1.0 TSI Highline
Location: Finland

Re: 6R 2010, metal pins for Quadlock and fusebox

Post by Lktuning » Fri Mar 15, 2019 1:05 pm


ciclo
Bling Bling Diamond Member
Posts: 4896
Joined: Sun Feb 24, 2013 10:20 am
Drives: Polo 6R '13 / Golf MK7.5 '19
Location: Earth ♥, Spain ☼
Contact:

Re: Re:

Post by ciclo » Fri Mar 15, 2019 5:58 pm

Dink wrote:
Thu Mar 14, 2019 1:32 pm
... a decent crimper
... and would like to use the correct parts.

pranaynewton
New
Posts: 24
Joined: Fri Feb 22, 2019 7:54 pm
Drives: 6R 2014 (Vento TSI 1.2L)
Location: Bangalore

Re: 6R 2010, metal pins for Quadlock and fusebox

Post by pranaynewton » Mon Mar 18, 2019 5:20 am

Has any one used this crimp tool instead of the Laser Tools 3932 for removal of fuse female crimps from the holder?

http://www.farnell.com/datasheets/15813 ... 1552885682

Also facing some issues in removing the female crimps from the fuse box for an upgrade. Does anyone have a manual / instruction sheet on fuse box female crimp replacement?

ciclo
Bling Bling Diamond Member
Posts: 4896
Joined: Sun Feb 24, 2013 10:20 am
Drives: Polo 6R '13 / Golf MK7.5 '19
Location: Earth ♥, Spain ☼
Contact:

Re: 6R 2010, metal pins for Quadlock and fusebox

Post by ciclo » Mon Mar 18, 2019 6:57 am

There are better and worse tools, but none is the best and none is the worst, it depends largely on personal skills, ... well, sometimes also to be lucky that the terminal is not caught in the plastic due to pulling from the wire with excessive force.
Some time ago I was half an hour of attempts to remove a terminal from the BCM white connector. :lol:

There is a procedure explained in ELSAwin (also in my guide for automatic lights), although it is not definitive ...


These tools help a lot:
Image

ciclo
Bling Bling Diamond Member
Posts: 4896
Joined: Sun Feb 24, 2013 10:20 am
Drives: Polo 6R '13 / Golf MK7.5 '19
Location: Earth ♥, Spain ☼
Contact:

Re: 6R 2010, metal pins for Quadlock and fusebox

Post by ciclo » Mon Mar 18, 2019 7:05 am


joe6
Bronze Member
Posts: 217
Joined: Mon Aug 22, 2016 5:24 pm
Drives: Golf Mk6 GTI (Scirocco gone) Polo 6c GTI
Location: East Midlands

Re: 6R 2010, metal pins for Quadlock and fusebox

Post by joe6 » Mon Mar 18, 2019 9:55 am

This company has many electrical components including connectors and crimp tools http://www.vehicle-wiring-products.eu/

exantas
New
Posts: 20
Joined: Sun Jan 06, 2019 5:14 pm
Drives: Skoda Fabia 5J
Location: Iceland / Greece

Re:

Post by exantas » Tue Apr 02, 2019 8:41 pm

iichel wrote:
Sun Mar 10, 2019 9:24 am
Quadlock: Junior power timer
1-24: Junior power timer
25-60: Standard power timer

https://www.a4-freunde.com/showwiki.php ... uebersicht
Does somebody know the correct crimper size for these connectors ? ^
I bought this plier that say 26AWG-16AWG (0,5 - 1 - 1,5 mm^2) but the metal pins don't look to fit in the biggest crimper
Image

Post Reply