ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Chat about your 6R/6C model Polos here!
User avatar
ciclo
Bling Bling Diamond Member
Posts: 3274
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R TSI R-line ☺ '13
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo » Sat Sep 16, 2017 8:55 am

The enigma for direct TPMS installed on ours 6R (PQ25 platform) diesel and petrol is already solved.

Coincidentally :lol: , yesterday I received two emails from two good friends and users of this forum, benji58 and firegrafik, with enough information to assert that this issue is already solved for TPMS units 3AA 907 273 F installed on ours 6R.

Petrol
The firegrafik solution is based on the IC software adaptation/update to a version 0705 or higher, for example from the WRC IC software - 0705 and 0709 -.
ZZZhuk adapted his IC software to WRC version and the direct TPMS worked perfectly. His TPMS direct already worked properly with other IC software https://www.youtube.com/watch?v=Y2Llayg1lEM, from T5 (I think), but finally he has decided to adapt his IC software to the WRC version.

Diesel
The benji58 solution is based on the installation of Amarok IC with 0805 software. First results :arrow: https://servimg.com/view/18943939/966, ...he is working on it.


rdasadia https://www.youtube.com/watch?v=1TnpHOzN_g0 gave us the clues with its autoscan and its units with the original software (read this topic viewtopic.php?f=56&t=69746#p520142 ) and finally we were able to obtain a good result.


My thanks to everyone who have participated in this new mod for our 6R PQ25 8) . Adam87, firegrafik, ZZZhuk, rdasadia, iichel, benji58, diskoboy, n4s, spacewalker ... and many other unknown masters... :lol:

Thus:
IC software = 0705 or higher
BCM = 7E0 937 090B or higher
TPMS unit = 3AA 907 273 F
Sensors/valves = 3AA 907 275 F

govindshama, diskoboy, smg_shardul, etc...


From here there is information on this, but it is pending improvement.

This information will be expanded when possible. :wink:

User avatar
iichel
Platinum Member
Posts: 1914
Joined: Fri Nov 14, 2014 2:14 pm
Drives: 6R becoming 6C. slowly.
Location: Zurich, Switzerland

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by iichel » Sat Sep 16, 2017 9:51 am

very interesting. i need to find a BCM 7E0 B with LED headlight support :D :D

User avatar
ciclo
Bling Bling Diamond Member
Posts: 3274
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R TSI R-line ☺ '13
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo » Sat Sep 16, 2017 1:33 pm

Difficult but not impossible, I will also look for a 7E0___ B/C BCM for your LED headlights. (from T6)

And if it is not possible, you know, you'll have to scratch your pocket (again) and buy it brand new.

User avatar
iichel
Platinum Member
Posts: 1914
Joined: Fri Nov 14, 2014 2:14 pm
Drives: 6R becoming 6C. slowly.
Location: Zurich, Switzerland

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by iichel » Sat Sep 16, 2017 1:34 pm

yes for sure it's always possible, but to spend so much money on a new BCM for on this mod... :mrgreen:

firegrafik
Bronze Member
Posts: 147
Joined: Thu Jan 28, 2016 10:23 am
Drives: 6R 1,6MPI(CFNA) sedan
Location: Buzuluk, Orenburg region, Russia
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by firegrafik » Sat Sep 16, 2017 3:25 pm

iichel wrote:
Sat Sep 16, 2017 9:51 am
very interesting. i need to find a BCM 7E0 B with LED headlight support :D :D
I bought used 7E0937090B from T6 with LED headlights (but still haven't installed it). Anyway if someone could teach me how to read/write the EEPROM dump using VCP from that my BCM, and it could be possible to make any 7E0937090B to be compatible with LED headlights by writing that dump.

edinogti
New
Posts: 11
Joined: Fri Aug 18, 2017 6:57 pm
Drives: 6R GTI 2010
Location: Italy

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by edinogti » Sat Sep 16, 2017 4:51 pm

ciclo wrote:
Thu Sep 14, 2017 1:16 pm
For example:
https://es.aliexpress.com/af/AUTO-Intel ... isViewCP=y

OK perfect
so this would be the non-original module to close the mirrors.
right?
Because I was thinking long ago I'd bought on the internet both the command of the reclosable mirrors and the front window lifts motors with the function to close the mirrors
do you say that the impulse can I then take it directly from the drive side of the driver's door?

however, thank you again for the time you are dedicating :-)

User avatar
ciclo
Bling Bling Diamond Member
Posts: 3274
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R TSI R-line ☺ '13
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo » Sat Sep 16, 2017 9:37 pm

edinogti wrote:
Sat Sep 16, 2017 4:51 pm
do you say that the impulse can I then take it directly from the drive side of the driver's door?
Try it.

User avatar
ciclo
Bling Bling Diamond Member
Posts: 3274
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R TSI R-line ☺ '13
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo » Sat Sep 16, 2017 9:39 pm

iichel wrote:
Sat Sep 16, 2017 1:34 pm
yes for sure it's always possible, but to spend so much money on a new BCM for on this mod... :mrgreen:
and new codings... :wink:

n4s
New
Posts: 12
Joined: Mon Mar 27, 2017 9:46 am
Drives: 1.2 TSI Alive
Location: Portugal

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by n4s » Sun Sep 17, 2017 10:47 am

n4s wrote:
Tue Aug 01, 2017 10:53 am
Really "love" what you did to the car.

I have finally understood why Cruise control wasn't displayed. It's deactivated in Engine Flash

A bit of the story here:
http://www.mytiguan.com/index.php?/topi ... rofitters/

Also been reading about your CCS test with steering buttons and something I don't understand, in my Polo the buttons are a subsystem of CAN, not BCM. Can't this impact the communication to your ABS. Maybe if CAN is sending from BCM the info is another. Also saw on Elsawin that CCS connection in steering change from pin 2 to 4, did you change this?

User avatar
ciclo
Bling Bling Diamond Member
Posts: 3274
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R TSI R-line ☺ '13
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo » Mon Sep 18, 2017 10:27 am

n4s wrote:
Sun Sep 17, 2017 10:47 am
n4s wrote:
Tue Aug 01, 2017 10:53 am
Really "love" what you did to the car.

I have finally understood why Cruise control wasn't displayed. It's deactivated in Engine Flash

A bit of the story here:
http://www.mytiguan.com/index.php?/topi ... rofitters/

Also been reading about your CCS test with steering buttons and something I don't understand, in my Polo the buttons are a subsystem of CAN, not BCM. Can't this impact the communication to your ABS. Maybe if CAN is sending from BCM the info is another. Also saw on Elsawin that CCS connection in steering change from pin 2 to 4, did you change this?
If you mean the Gra_high, yes, it will be for when I have finished with the direct TPMS.

When I'll go to install my new IC to my VW dealer I will tell them (once again) that if they could be so kind to activate it on my ECU. :)

User avatar
ciclo
Bling Bling Diamond Member
Posts: 3274
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R TSI R-line ☺ '13
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo » Mon Sep 18, 2017 10:40 am

firegrafik
This VCDS reading is from an instrument cluster with the factory software. (6R, E model year, CBZB, manual gearbox)
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb
Part No SW: 6R0 920 860 M HW: 6R0 920 860 M :shock: ...... searching :arrow: 6R0 920 860 M... back side
Component: KOMBI H04 0709 :)
Serial number: 00000000000000
Coding: 140E01
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04723
ROD: EV_Kombi_UDS_VDD_RM09_SE35.rod
VCID: 3E7926B8A18974EEA6F-806B

No fault code found.

-------------------------------------------------------------------------------

I think I'm going to try it sooner than I told you ... :wink:

User avatar
iichel
Platinum Member
Posts: 1914
Joined: Fri Nov 14, 2014 2:14 pm
Drives: 6R becoming 6C. slowly.
Location: Zurich, Switzerland

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by iichel » Tue Sep 19, 2017 11:55 am

hehe so I just found this reported topic... :mrgreen: :mrgreen:

Image

n4s
New
Posts: 12
Joined: Mon Mar 27, 2017 9:46 am
Drives: 1.2 TSI Alive
Location: Portugal

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by n4s » Tue Sep 19, 2017 12:33 pm

ciclo wrote:
Mon Sep 18, 2017 10:27 am
n4s wrote:
Sun Sep 17, 2017 10:47 am
n4s wrote:
Tue Aug 01, 2017 10:53 am
Really "love" what you did to the car.

I have finally understood why Cruise control wasn't displayed. It's deactivated in Engine Flash

A bit of the story here:
http://www.mytiguan.com/index.php?/topi ... rofitters/

Also been reading about your CCS test with steering buttons and something I don't understand, in my Polo the buttons are a subsystem of CAN, not BCM. Can't this impact the communication to your ABS. Maybe if CAN is sending from BCM the info is another. Also saw on Elsawin that CCS connection in steering change from pin 2 to 4, did you change this?
If you mean the Gra_high, yes, it will be for when I have finished with the direct TPMS.

When I'll go to install my new IC to my VW dealer I will tell them (once again) that if they could be so kind to activate it on my ECU. :)
Sorry, really dont know how this happened but i didnt want to write that again.

I probably clicked quote and submite with phone in pocket

User avatar
ciclo
Bling Bling Diamond Member
Posts: 3274
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R TSI R-line ☺ '13
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo » Tue Sep 19, 2017 5:19 pm

n4s wrote:
Tue Sep 19, 2017 12:33 pm
ciclo wrote:
Mon Sep 18, 2017 10:27 am
n4s wrote:
Sun Sep 17, 2017 10:47 am
If you mean the Gra_high, yes, it will be for when I have finished with the direct TPMS.

When I'll go to install my new IC to my VW dealer I will tell them (once again) that if they could be so kind to activate it on my ECU. :)
Sorry, really dont know how this happened but i didnt want to write that again.

I probably clicked quote and submite with phone in pocket
Yeah, .... How many times do I have to tell you that the smartphone should not be used with body-parts other than fingers?.... :mrgreen: ... :lol:
Damn and loved smartphone ... makes everybody happy.
iichel wrote:
Tue Sep 19, 2017 11:55 am
hehe so I just found this reported topic... :mrgreen: :mrgreen:

[img]https://i.imgur.com/ryhiehd.png[/img
:)
I will contact Warez ...

Get ready Warez ... :lol: :wink:

User avatar
ciclo
Bling Bling Diamond Member
Posts: 3274
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R TSI R-line ☺ '13
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.

Post by ciclo » Tue Sep 19, 2017 5:49 pm

iichel, you would be so kind to tell me the username.

Post Reply