VCDS vag com programming

greypolo9n3 · Post by **greypolo9n3** » Sat Aug 03, 2013 8:47 pm

anyone here with the programme?

Wanted to buy a trip and cruise stalk and get them programmed

Also get a few settings right, willing to travel . Thanks

Jakey6r · Post by **Jakey6r** » Mon Aug 05, 2013 11:41 am

Where abouts are you based? Ive got a friend that has it

greypolo9n3 · Post by **greypolo9n3** » Mon Aug 05, 2013 11:10 pm

Jakey6r wrote:Where abouts are you based? Ive got a friend that has it

in peterborough, can he use it properly?

StreetTriple · Post by **StreetTriple** » Mon Aug 12, 2013 8:43 am

I am interested in this program but I am getting really confused as there appears to be a massive difference in price for this system....eBay for £40 (do they work??) or the full version for £300!!

I'm not looking to do much, and to be honest I'm not sure what I would be able to do. I have 2010 1.4 SEL with high line dash. Could anybody confirm I would be able to turn on these features?

Speedo/rev needle sweep
Auto locking above 10mph
Remove the (annoying) feature of ONLY unlocking the drivers door from key

If I can't sort this I can wait til next service time and get them to do it but I like messing and modding my car!!

calvinw1 · Post by **calvinw1** » Mon Aug 12, 2013 10:42 am

Some of the cheaper ones do work, I'm on my phone at the minute but I can send you the link shortly to one I purchased off amazon for 30ish, it turned out to have all the features and can do what you want it to.
Only downside is its from Hong Kong I think, takes a few weeks to get here...

Edit: found the link from someone else's topic.. http://tinyurl.com/c7y8uc9

RayC · Post by **RayC** » Tue Aug 13, 2013 1:19 pm

Hello

I'm new on here but have a few VW's

To answer some of the questions

Needle Sweep - i dont know the coding, it can be done on some Golf Mk6's
Auto Locking about 10 km/h is a simple job with the proper VCDS (i have this), i've set my 2009 (59 plate) 1.4 SE to work in this way, you can also simply check the unlock all doors function too so all those features are easily available with the correct Rosstech hardware and i have done them on my car so know they work

From memory there is something in the manual about how to set the locking, it involves holding the wiper stalk (could be drivng lights though as i only scan read it quickly)

Cheers

Ray

StreetTriple · Post by **StreetTriple** » Tue Aug 13, 2013 3:11 pm

Yeah thanks for that I had another look at the manual and its for disabling the DRL not the locking!!

I'll maybe take the plunge and order the part and have a play about.

RayC · Post by **RayC** » Tue Aug 13, 2013 3:52 pm

no worries, couldnt remember, the VCDS will do all your bits easily

do you have any coding inof on the needle sweep?

calvinw1 · Post by **calvinw1** » Tue Aug 13, 2013 4:58 pm

To get the needle sweep, go into instruments-adaptation-indicator celebration mode- on

needle sweep will be there on the list as well, but it doesn't let you change it.

greypolo9n3 · Post by **greypolo9n3** » Tue Aug 13, 2013 6:54 pm

so how hard is it exactly to do the coding via VCDS? My friend has it i may be able to borrow it of him

calvinw1 · Post by **calvinw1** » Tue Aug 13, 2013 7:17 pm

greypolo9n3 wrote:so how hard is it exactly to do the coding via VCDS? My friend has it i may be able to borrow it of him

It's easy, every option is there for you to choose from and its pretty much a case of toggling off/on

greypolo9n3 · Post by **greypolo9n3** » Tue Aug 13, 2013 10:43 pm

calvinw1 wrote:
greypolo9n3 wrote:so how hard is it exactly to do the coding via VCDS? My friend has it i may be able to borrow it of him

It's easy, every option is there for you to choose from and its pretty much a case of toggling off/on

oohh...ive seen some screenshots and all i see is binary

like 0101010101010101101011010 matrix code s**t lol

calvinw1 · Post by **calvinw1** » Tue Aug 13, 2013 11:46 pm

aha yeah thats in the long coding. Won't need that for the majority of options

StreetTriple · Post by **StreetTriple** » Wed Aug 14, 2013 3:12 am

calvinw1 wrote:To get the needle sweep, go into instruments-adaptation-indicator celebration mode- on

needle sweep will be there on the list as well, but it doesn't let you change it.

So this ISN'T something I can switch on, on my car then? It is present but can't change it to off/on.....is that right?

Wilxay · Post by **Wilxay** » Wed Aug 14, 2013 5:31 am

It's called indicator celebration mode NOT needle sweep. Like The guy said it can be done from instruments>adaptation>indicator celebration mode>on

UK-POLOS.NET - THE VW Polo Forum