Polo 6R - Useful Part Numbers

Chat about your 6R/6C model Polos here!
User avatar
amer6R
Bronze Member
Posts: 228
Joined: Thu Feb 06, 2020 7:57 am
Drives: Polo 6R 2010 1.6 TDI
Location: Balkans

Re: Polo 6R - Useful Part Numbers

Post by amer6R »

I've got it sorted.
Can someone post scheme for Headlight ( H4) bulb connector? I need locations for high beam, low beam positive (+), and ground.
User avatar
iichel
Bling Bling Diamond Member
Posts: 4096
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 1.2 TDI
Location: The Netherlands

Re: Polo 6R - Useful Part Numbers

Post by iichel »

Image
User avatar
amer6R
Bronze Member
Posts: 228
Joined: Thu Feb 06, 2020 7:57 am
Drives: Polo 6R 2010 1.6 TDI
Location: Balkans

Re: Polo 6R - Useful Part Numbers

Post by amer6R »

Thank you :!:
User avatar
amer6R
Bronze Member
Posts: 228
Joined: Thu Feb 06, 2020 7:57 am
Drives: Polo 6R 2010 1.6 TDI
Location: Balkans

Re: Polo 6R - Useful Part Numbers

Post by amer6R »

Did anyone port out the duct for air intake ( leading into the air filter)? I mean on the part that is behind the grill ( I looks pretty restrictive)
User avatar
amer6R
Bronze Member
Posts: 228
Joined: Thu Feb 06, 2020 7:57 am
Drives: Polo 6R 2010 1.6 TDI
Location: Balkans

Re: Polo 6R - Useful Part Numbers

Post by amer6R »

Does someone have a picture of a "skid plate/ plastic belly protection?" for 1.6 TDI, I cant figure out where are the stock mounting locations since im making a custom one.
Danny Wilson
New
Posts: 7
Joined: Sun Jun 07, 2020 9:58 am
Drives: Polo gti 6r
Location: Brighton

Re: Polo 6R - Useful Part Numbers

Post by Danny Wilson »

Anyone know the part number of the polo wrc undertray that connects the front bumper to the main undertray?
Thanks
User avatar
amer6R
Bronze Member
Posts: 228
Joined: Thu Feb 06, 2020 7:57 am
Drives: Polo 6R 2010 1.6 TDI
Location: Balkans

Re: Polo 6R - Useful Part Numbers

Post by amer6R »

Any tips on removing this sucker? The nut that holds the tie rod end wont budge, and I cant unbolt the tie rod. Tried spraying wd.
The nut clockwise, the tie rod end anti clockwise.
I tried removing tie rod form carrier and than, no luck.
Attachments
IMG-b8e88aa15f3451ac7f7523e7db4b053e-V.jpg
IMG-b8e88aa15f3451ac7f7523e7db4b053e-V.jpg (426.92 KiB) Viewed 455 times
User avatar
amer6R
Bronze Member
Posts: 228
Joined: Thu Feb 06, 2020 7:57 am
Drives: Polo 6R 2010 1.6 TDI
Location: Balkans

Re: Polo 6R - Useful Part Numbers

Post by amer6R »

Can someone post the dimension for bonnet and fender gap from factory manual or from your car. How much is it in mm?
Post Reply