6R Cruise Control Retrofit Problems

Chat about your 6R/6C model Polos here!
User avatar
ciclo
Bling Bling Diamond Member
Posts: 3502
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R TSI R-line ☺ '13
Location: Earth ♥, Spain ☼
Contact:

Re: 6R Cruise Control Retrofit Problems

Post by ciclo » Wed Dec 06, 2017 7:53 pm

The faults can be deleted with the Clear All DTCs button, If any of them is permanent you have to solve it.

Save your first autoscan as if it was gold. Save button. In this autoscan are the original codings of your Polo.
It will be saved in the Logs folder of the Ross-tech program.

chinesia75
New
Posts: 18
Joined: Thu Oct 12, 2017 12:57 pm
Drives: VW POLO 6R
Location: ITALY

Re: 6R Cruise Control Retrofit Problems

Post by chinesia75 » Thu Dec 07, 2017 1:58 pm

hi Ciclo , the scan codes will have to copy them along with the long coding in the new bcm; quite right ? Thanks

drpudhi
New
Posts: 5
Joined: Tue Aug 29, 2017 7:01 pm
Drives: polo GT TSI
Location: India

Re: 6R Cruise Control Retrofit Problems

Post by drpudhi » Sun Jan 14, 2018 3:25 pm

Hi ciclo, this is regarding a CC retrofit on my 2013 polo 1.2 TSI WITH dsg. After proper installation and all the coding, my CC doesnot work still. Have attached a few screen shots.

Also, I have a GTI steering wheel with paddles retrofitted. But the trip buttons in it didn't work as the right wiper stalks had those and i was ok with it. Now, i bought this stalk ( https://www.ebay.com/itm/NEW-Original-V ... true&rt=nc ), without trip buttons, in the hope that my steering wheel buttons will take over. But, after the install, my right side steering trip buttons still doesn't work. Is there any extra wiring that's to be done or am i missing something ?

The other issue i'm facing the central locking button both in the driver door and the key fob doesnot work, while the unlock button works. Am not sure why this is happening. Will be help full if you can throw some light.

Image

Image

Image

Image

Image

firegrafik
Bronze Member
Posts: 168
Joined: Thu Jan 28, 2016 10:23 am
Drives: 6R 1,6MPI(CFNA) sedan
Location: Buzuluk, Orenburg region, Russia
Contact:

Re: 6R Cruise Control Retrofit Problems

Post by firegrafik » Sun Jan 14, 2018 4:13 pm

drpudhi wrote:
Sun Jan 14, 2018 3:25 pm
After proper installation and all the coding, my CC doesnot work still.
Have you coded the cruise control at 01 Engine control unit (05 Byte 05 bit)?
drpudhi wrote:
Sun Jan 14, 2018 3:25 pm
Also, I have a GTI steering wheel with paddles retrofitted. But the trip buttons in it didn't work as the right wiper stalks had those and i was ok with it.
On instrument clusters with red display doesn't work trip control through right buttons on multifunctional steering wheels. All Russian Polo Sedans with such clusters has the same issue. There are two ways:
1) replace the right stalk from old one (but it could be uncompatible so it is 50% success possibility)
2) replace the instrument cluster. Install MFA+(Maxidot) cluster.
drpudhi wrote:
Sun Jan 14, 2018 3:25 pm
The other issue i'm facing the central locking button both in the driver door and the key fob doesnot work, while the unlock button works. Am not sure why this is happening. Will be help full if you can throw some light.
I suppose you have also changed the BCM. Have you deactivated the factory mode after installing? 09 centr.elect, 99 adaptation channel . The value should be 00.

Also red display cluster doesn't have cruise control light indicator. So while cruise control will work you will not see it. It is one more reason to install Mfa+ cluster
Last edited by firegrafik on Mon Jan 15, 2018 4:00 am, edited 1 time in total.

User avatar
iichel
Bling Bling Diamond Member
Posts: 2066
Joined: Fri Nov 14, 2014 2:14 pm
Drives: 6R becoming 6C. slowly.
Location: Zurich, Switzerland

Re: 6R Cruise Control Retrofit Problems

Post by iichel » Sun Jan 14, 2018 5:20 pm

maybe a full VCDS autoscan would be useful, so we can have a look.
if the factory mode would still be active (channel 99), this would show up as a DTC in the 09 module iirc. here there appear to be no DTCs in any module

User avatar
ciclo
Bling Bling Diamond Member
Posts: 3502
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R TSI R-line ☺ '13
Location: Earth ♥, Spain ☼
Contact:

Re: 6R Cruise Control Retrofit Problems

Post by ciclo » Sun Jan 14, 2018 7:12 pm

drpudhi wrote:
Sun Jan 14, 2018 3:25 pm
Hi ciclo,...
Hi drpudhi, welcome
Follow firegrafik instructions.

drpudhi
New
Posts: 5
Joined: Tue Aug 29, 2017 7:01 pm
Drives: polo GT TSI
Location: India

Re: 6R Cruise Control Retrofit Problems

Post by drpudhi » Thu Jan 18, 2018 2:09 pm

ciclo wrote:
Sun Jan 14, 2018 7:12 pm
drpudhi wrote:
Sun Jan 14, 2018 3:25 pm
Hi ciclo,...
Hi drpudhi, welcome
Follow firegrafik instructions.
firegrafik wrote:
Sun Jan 14, 2018 4:13 pm

Also red display cluster doesn't have cruise control light indicator. So while cruise control will work you will not see it. It is one more reason to install Mfa+ cluster
Thank you guys. The central locking issue was resolved with changing the factory mode. And the cruise control was not working because of a break in the power wire from the fuse. The wiring harness i got from aliexpress didn't have the wire to fuse and so i routed it separately which might have broken during installation. Changing the wire solved the issue. Now the CC works fine. The only issue now is the MFD buttons don't work. Looking at changing the cluster now.

User avatar
ciclo
Bling Bling Diamond Member
Posts: 3502
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R TSI R-line ☺ '13
Location: Earth ♥, Spain ☼
Contact:

Re: 6R Cruise Control Retrofit Problems

Post by ciclo » Thu Jan 18, 2018 5:36 pm

Thanks for letting us know your progress, firegrafik hit the nail.

Please keep us informed, thank you.

Post Reply