Page 17 of 18

Re: 6R Cruise Control Retrofit Problems

Posted: Mon Oct 23, 2017 7:56 pm
by ciclo
If you buy the aliexpress stalks you have to install your current steering ring on them.

:arrow: VCDS is a good diagnostic tool. (for example)

Re: 6R Cruise Control Retrofit Problems

Posted: Fri Oct 27, 2017 1:42 pm
by chinesia75
Hallo ciclo,
I found the stalks 6r0953521c used; okay for my car, you advised me on 6r0953507c; can the cables be purchased separately?

Re: 6R Cruise Control Retrofit Problems

Posted: Fri Oct 27, 2017 3:56 pm
by ciclo

Re: 6R Cruise Control Retrofit Problems

Posted: Fri Oct 27, 2017 4:30 pm
by chinesia75
ok Ciclo thanks, so fine 6r0953521c ?

Re: 6R Cruise Control Retrofit Problems

Posted: Sun Oct 29, 2017 10:14 am
by ciclo
chinesia75 wrote:
Fri Oct 27, 2017 4:30 pm
ok Ciclo thanks, so fine 6r0953521c ?
Yes

Re: 6R Cruise Control Retrofit Problems

Posted: Fri Nov 17, 2017 2:19 pm
by chinesia75
hello cycle, as I wrote earlier tried to steal my car by damaging it, only now after buying all the components to fix it, I took the opportunity to buy the components to add the cruise control, i bought the bcm 6r0937087p, stalks 6r0953521c, kufatech cables, cable vag.com version 17.8 for obd. I wanted to ask you in particular pin 28 of connector T41, it should be connected to bcm or directly to fuse box (in what position)? soon they sent me photo editing, and maybe they would ask for some help; Thanks in advance .

Re: 6R Cruise Control Retrofit Problems

Posted: Fri Nov 17, 2017 2:25 pm
by chinesia75
sorry ciclo , I called you cycle; I used the ITA / UK translator.

Re: 6R Cruise Control Retrofit Problems

Posted: Fri Nov 17, 2017 6:31 pm
by ciclo
ciclo = cycle
noun
A single complete execution of a periodically repeated phenomenon. For example, a spin around the sun ...or the galaxy.

As long as we understand each other, you can name me as you prefer. :wink:

Now,
look these pictures (3,4):

Image

Image

Image

Image

Image

and click here :arrow: Image

select the +15 vacant slot in the fuse box that you prefer.

Info help :arrow: Image

Image

Re: 6R Cruise Control Retrofit Problems

Posted: Fri Nov 17, 2017 10:53 pm
by chinesia75
thanks again ciclo; ciclo is also a word used in Italian es. ciclomotore ; ciclo = 2 * π * r 😁

Re: 6R Cruise Control Retrofit Problems

Posted: Mon Nov 20, 2017 4:21 am
by ciclo
τ = 2π = 6.28318...

One/full turn

According to diameter
Image 6.28318...

According to the radius
Image 6.28318...

τau

Will Tau replace Pi forever? :lol:

Re: 6R Cruise Control Retrofit Problems

Posted: Mon Nov 20, 2017 9:01 pm
by chinesia75
good cycle, know that you like science, are you an engineer? I studied engineering for three years, then I changed my way to medicine ... but I'm fascinated by math, geometry and the sciences in general ... they open the mind !!

Re: 6R Cruise Control Retrofit Problems

Posted: Tue Nov 21, 2017 11:28 am
by iichel
ciclo wrote:
Mon Nov 20, 2017 4:21 am
Will Tau replace Pi forever? :lol:
https://www.youtube.com/watch?v=OEMA6jhi5Qo&t=302s

Re: 6R Cruise Control Retrofit Problems

Posted: Tue Dec 05, 2017 3:56 pm
by chinesia75
hello Ciclo , of course, also greetings to all the guys here in the forum;
this week I proceed to the installation of cruise control; I wanted to know, when replacing the bcm, how should I proceed with the vag? do I have to recode the car keys? some cosinglio because I'm not very experienced thanks from Savino Italy !!

Re: 6R Cruise Control Retrofit Problems

Posted: Tue Dec 05, 2017 7:28 pm
by ciclo
You have to do exactly as explained in this link:
http://wiki.ross-tech.com/wiki/index.ph ... eplacement

Re: 6R Cruise Control Retrofit Problems

Posted: Wed Dec 06, 2017 6:00 pm
by chinesia75
thanks Ciclo, yesterday I installed the program vag.com (tech-ross); I did my first auto scan, I realized that there are 4 errors, engine, brakes, air conditioning and radio; even if I do not have warning lights and everything works perfectly (at least it seems so). as soon as I have some free time I'll run the ccs ... I'll also take some pictures of the work, greetings by Savino from Italy