Needle sweep

Chat about your 6R/6C model Polos here!
EdgardoRodriguez
Getting There!
Posts: 56
Joined: Tue Feb 27, 2018 5:31 pm
Drives: other
Location: Argentina

Re: Needle sweep

Post by EdgardoRodriguez »

Jay-Jay wrote:Thank you for your answer.

Yes, I also modified Offset 2E7 (bit 6 from 0 to 1): this enables the activation via VCDS.

When I switch on the cluster on the bench, the staging doesn't work.
But I still didn't tried the cluster on the car.


What is wrong? :/
In my experience powering on terminal 15 and 31 both at the same time produces this, but if you first power is on permanent 12v terminal and then ignition one, it will work


Enviado desde mi iPhone utilizando Tapatalk
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Needle sweep

Post by iichel »

I guess you mean 30? 31 is GND
EdgardoRodriguez
Getting There!
Posts: 56
Joined: Tue Feb 27, 2018 5:31 pm
Drives: other
Location: Argentina

Re: Needle sweep

Post by EdgardoRodriguez »

iichel wrote:I guess you mean 30? 31 is GND
Sorry yes you are indeed right, my memory failed hehe


Enviado desde mi iPhone utilizando Tapatalk
peter_dk25
Silver Member
Posts: 461
Joined: Wed Jun 18, 2014 6:58 am
Drives: Blue GT
Location: Denmark

Re: Needle sweep

Post by peter_dk25 »

In the 6R - try: 17, Instrument > Adaption > Indicator Celebration (near the end of the adaption Menu)
Andy1273
Bronze Member
Posts: 105
Joined: Sat May 12, 2018 12:40 pm
Drives: 1.2 tsi polo
Location: Leeds

Re: Needle sweep

Post by Andy1273 »

Might seem a daft question but how do access the VCDS? and what actually does the needle sweep do and why do people activate it?
User avatar
Jay-Jay
Silver Member
Posts: 300
Joined: Mon May 02, 2016 6:02 pm
Drives: Polo 6R HL 1.2TSI 77kw, Audi S1 MY2018
Location: Rome (Italy)

Re: Needle sweep

Post by Jay-Jay »

[quote="EdgardoRodriguez]
[...] if you first power is on permanent 12v terminal and then ignition one, it will work[...][/quote]
Thank you! It worked!
I powered first the pin 15 and then pin 30 and the cluster did the staging on the bench.
https://www.youtube.com/watch?v=tw4PvCu ... e=youtu.be
Then I modified the eeprom also on the MFA+ cluster and it worked as well.

Now I have another "problem".
Needles are not illuminated when doing the staging.
https://www.youtube.com/watch?v=X5vE4jq ... e=youtu.be

How do I fix this?
RUM4MO
Bling Bling Diamond Member
Posts: 5859
Joined: Sat Dec 30, 2006 9:12 pm
Drives: B8 S4 & 6R/6C1 1.2TSI 110
Location: Mid Lothian

Re: Needle sweep

Post by RUM4MO »

Andy1273 wrote: Sun Sep 23, 2018 11:25 am Might seem a daft question but how do access the VCDS? and what actually does the needle sweep do and why do people activate it?
It does as it says, it prompts a full scale squeep of some of the instrument pointers/needles - just maybe looks good that is all.

Some of the higher powered cars have this as standard, for instance my 2011 Audi S4 does it if I want to be silly enough to wait for it to complete that before starting the engine, but I don't, I just press the key and let it get on with starting up the engine.

So, on other cars it is just an option that can be enabled - and why not if that is what you want.

Edit:- sorry, I missed the bit about VCDS - search online and find a UK based reseller.
User avatar
Jay-Jay
Silver Member
Posts: 300
Joined: Mon May 02, 2016 6:02 pm
Drives: Polo 6R HL 1.2TSI 77kw, Audi S1 MY2018
Location: Rome (Italy)

Re: Needle sweep

Post by Jay-Jay »

Ok, I fixed my problem on my GTI MFA+ cluster.
I had to modify Offset 2E6 (Bit 4 from "0" to "1").

Now the needles are illuminated while they do the staging.

https://www.youtube.com/watch?v=_6e_VsyVe0w
On my old standard MFA cluster, instead, it was necessary to modify Offset CC (Bit 4 from "0" to "1").

I've been also able to make the "Staging" channel available via VCDS, by modifing Offset CD (Bit 6 from "0" to "1") and also Offset 2E7 (Bit 6 from "0" to "1").
User avatar
Bigtam
Bronze Member
Posts: 192
Joined: Sun Sep 23, 2012 9:02 pm
Drives: Polo GTI 2016
Location: East Lothian

Re: Needle sweep

Post by Bigtam »

This is using obdeleven
Thanks to Green Comet


viewtopic.php?f=56&t=69230&hilit=OBDELEVEN
kartikhere_2498
New
Posts: 22
Joined: Fri Sep 18, 2020 6:30 am
Drives: 2011 VW vento (polo sedan) 1.6mpi MT
Location: India

Re: Needle sweep

Post by kartikhere_2498 »

Hi folks
I have a VW Vento (polo sedan) 2010, I have attached the image of the cluster and wanted to know if it is possible to activate the needle sweep on that cluster? also does the BCM has to do anything with the activation of needle sweep feature? My BCM part number is 6RU937086B.
Please throw some light on this
Thanks in advance :D
Attachments
20190501_161145.jpg
20190501_161145.jpg (2.38 MiB) Viewed 2260 times
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Needle sweep

Post by iichel »

If you have VCDS, have a look at the adaptation channels of your instrument cluster. Look for 'staging' or 'indicator celebration'
kartikhere_2498
New
Posts: 22
Joined: Fri Sep 18, 2020 6:30 am
Drives: 2011 VW vento (polo sedan) 1.6mpi MT
Location: India

Re: Needle sweep

Post by kartikhere_2498 »

iichel wrote: Sun Sep 27, 2020 5:32 pm If you have VCDS, have a look at the adaptation channels of your instrument cluster. Look for 'staging' or 'indicator celebration'
I have a clone VCDS cable (17.8 but that does not work, is there any way to repair the cable? I have posted the details of the error I get with the VCDS cable :)
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Needle sweep

Post by iichel »

Ok then it is going to be difficult :p
kartikhere_2498
New
Posts: 22
Joined: Fri Sep 18, 2020 6:30 am
Drives: 2011 VW vento (polo sedan) 1.6mpi MT
Location: India

Re: Needle sweep

Post by kartikhere_2498 »

iichel wrote: Mon Sep 28, 2020 7:53 am Ok then it is going to be difficult :p
I will try to arrange for a VCDS cable from a friend btw thanks for the quick reply :D
below is the link of my post describing the error codes with my cable
viewtopic.php?f=56&t=70519&p=575973#p575973
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Needle sweep

Post by iichel »

Yes I saw your post but I'm not in the position to help you, I'm sorry.
Post Reply