Polo 6R ABS CODING

Chat about your 6R/6C model Polos here!
4evermetalhead
New
Posts: 2
Joined: Wed Mar 28, 2018 5:44 am
Drives: A normal Polo!!!
Location: BEHIND YOU!!!!!!!!!!

Re: Polo 6R ABS CODING

Post by 4evermetalhead »

4evermetalhead wrote: Wed Mar 28, 2018 12:20 pm Morning lads,

Food for thought here. (i think) :D
First of all, for 8.2, i noticed that these two bits did not add up to my brain, which i could sure be wrong, but

"10 Byte, binary inverted value of the 2 Byte: (24/14/22/12)"

does not add up to

2 Byte, define the brake types:

24 – if the front 256mm disk and rear 200mm drum
28 – if the front 256mm disk and rear 232mm disk
44 – if the front 288mm disk and rear 200mm drum
48 – if the front 288mm disk and rear 232mm disk

correctly.

I could be wrong.

Also this:

40 – BXW/CGGB/CBZB/CGPA/CBZA/CHFA/CFNA left-side steering wheel

I think could be turned to "80" for RHD vehicles.
Right??????

Any input on this would be nice to discuss further.
THESE sort of things just intricate my curiosity.
According to my calculations

24 = 100100 -> inv.bin. = 011011 -> final inverted = 1b
28 = 101000 -> inv.bin. = 010111 -> final inverted = 17
44 = 1000100 -> inv.bin. = 0111011 -> final inverted = 3b
48 = 1001000 -> inv.bin. = 0110111 -> final inverted = 37

Isn't this correct?
Or is it the long sleepless hours i had, messing with my brain power?? :lol: :lol:
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Polo 6R ABS CODING

Post by iichel »

24 = 00100100 -> inverted = 00100100 -> final inverted = 24
28 = 00101000 -> inverted = 00010100 -> final inverted = 14
etc
EdgardoRodriguez
Getting There!
Posts: 56
Joined: Tue Feb 27, 2018 5:31 pm
Drives: other
Location: Argentina

Re: Polo 6R ABS CODING

Post by EdgardoRodriguez »

Hi there!
Perhaps some expert here can help me. Done a mistake (cluster swap - different VIN) and ABS recoded itself to zeros :shock:
Well, I was just testing so I have my original IC and everything is fine, except G85 which I can not calibrate :|
Actual coding of ABS module is EXACTLY the same as factory, cause I have several backups I can confirm it.
ESP and "steering wheel" indicators are on while ignition on, and also a "ESC malfunction" error pops up in IC.
This is the autoscan:

Code: Select all

Saturday,14,April,2018,20:38:20:00001
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 17.8.0.1 (x64)
Data version: 20170721 DS276.2
www.Ross-Tech.com


VIN: License Plate: 
Mileage: 40337   Repair Order: 



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 5Z-VW21 (6N0)
Scan: 01 02 03 04 09 10 15 17 19 25 44 56 0B

VIN: 

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: Malfunction 0010
04-Steering Angle -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: Malfunction 0010
56-Radio -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine (J623-CWSA)       Labels: None
   Part No SW: 04E 906 032 G    HW: 04E 907 425 A
   Component: 1.6l R4 MPI   H07 2706  
   Revision: --H07---    
   Coding: 00140012022400000000
   Shop #: WSC 07456 790 50316
   ASAM Dataset: EV_ECM16MPI02104E906032G 001007
   ROD: EV_ECM16MPI02104E906032G.rod
   VCID: 2446D40C2FDBFE66CE-8070

No fault code found.
Readiness: 1010 0001

-------------------------------------------------------------------------------
Address 02: Auto Trans        Labels: None
   Part No SW: 0C3 927 735 G    HW:             
   Component: MARELLI C348V SQ200 1504  
   Revision: --H02---    Serial number: BPLNF8S6P     
   Coding: 0000025
   Shop #: WSC 00000 000 00000
   VCID: 2E523624B917443628-807A

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: None
   Part No SW: 5Z0 907 379 K    HW: 6R0 907 379 AS
   Component: ESP9.0i front H03 0001  
   Serial number: --------------
   Coding: F1DC948D212313C68F1B29698458C8401500
   Shop #: WSC 07456 790 50316
   ASAM Dataset: EV_Brake1ESP90iBOSCH 003031
   ROD: EV_Brake1ESP90iBOSCH_003_VW21.rod
   VCID: 4D9051A81CD11F2E31-8018

1 Fault Found:
0993 - Steering angle sensor 
          B1168 54 [137] - Missing Calibration / Basic Setting
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 160
                    Mileage: 40337 km
                    Date: 2035.14.17
                    Time: 04:15:26


-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:. 7H0-937-08x-09.clb
   Part No SW: 7H0 937 090 D    HW: 7H0 937 090 
   Component: BCM PQ25 Max4 H78 0725  
   Revision: B9078001    Serial number: 0671 338141906
   Coding: 3BA98B384C3BC600113A06C06CC89A81B188629D608C2059240580020000
   Shop #: WSC 79157 025 435844
   VCID: 2F6C2B207E1D4D3E23-807A

   Subsystem 1 - Part No: 1K0 955 559 AH  Labels: 1K0-955-559-AG.CLB
   Component: RLS 150914 05  54  0403 
   Coding: 0530AD

   Subsystem 2 - Part No SW: 5Z0 959 800 A    HW: 5Z0 959 800 A
   Component: ZFH_4T  H08 0015 
   Serial number: 3982FL00001410090213
   Coding: 006B54

   Subsystem 3 - Part No SW: 5Z0 959 800 A    HW: 5Z0 959 800 A
   Component: ZFH_4T  H08 0015 
   Serial number: 3982FL00001410090213
   Coding: 006B54

   Subsystem 4 - Part No: 5Z0 947 105 F
   Component: DWA-Sensor 00  003 0008 
   Coding: 000000

   Subsystem 5 - Part No SW: 2H0 959 442     HW: 2H0 959 442 
   Component: E221__MFL-DC1  H01 0103 
   Serial number: 27140002040360104334
   Coding: A5FFFF

   Subsystem 6 - Part No SW: 5Z0 959 800 A    HW: 5Z0 959 800 A
   Component: ZFH_4T  H08 0015 
   Serial number: 3982FL00001410090213
   Coding: 006B54

   Subsystem 7 - Part No SW: 5Z0 959 800 A    HW: 5Z0 959 800 A
   Component: ZFH_4T  H08 0015 
   Serial number: 3982FL00001410090213
   Coding: 006B54

No fault code found.

-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels:* None
   Part No SW: 5Z0 919 475 A    HW: 7N0 919 475 
   Component: PARKHILFE 8K  H06 0002  
   Revision: --------    Serial number: 67781426000519
   Coding: 100003
   Shop #: WSC 00001 001 00001
   ASAM Dataset: EV_EPHVA18VW23X0000 001002
   ROD: EV_EPHVA18VW23X0000_VW21.rod
   VCID: 43847790CA95D95ED7-8016

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:* None
   Part No SW: 5Z0 959 655 A    HW: 5Z0 959 655 
   Component: VW10AirbagZZX H02 0216  
   Revision: --------    Serial number: 003NC305ZGS$
   Coding: 000000000000000000000000000000005A58
   Shop #: WSC 07456 790 50316
   ASAM Dataset: EV_AirbaVW10BPAVW12X 001001
   ROD: EV_AirbaVW10BPAVN750.rod
   VCID: 479C6380FEADF57E0B-8012

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:* 5Zx-920-xxx-17.lbl
   Part No SW: 5Z0 920 865 A    HW: 5Z0 920 865 A
   Component: KOMBI         H07 0010  
   Serial number: 00000000000000
   Coding: 860A22
   Shop #: WSC 07456 790 50316
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04726
   ROD: EV_Kombi_UDS_VDD_RM09_VW21.rod
   VCID: 3E720664A177B4B6B8-806A

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:. 6N0-909-901-6R.clb
   Part No SW: 6N0 909 901     HW: 7H0 937 090 
   Component: GW-K-CAN TP20 H78 0725  
   Revision: B9078001    
   Coding: 002200
   Shop #: WSC 79157 025 435844
   VCID: 70EEE85CA3A312C67A-8024

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels:* None
   Part No SW: 5Z0 920 865 A    HW: 5Z0 920 865 A
   Component: IMMO          H07 0010  
   Serial number:               
   Coding: 000000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
   ROD: EV_Immo_UDS_VDD_RM09_VW21.rod
   VCID: 3E720664A177B4B6B8-806A

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist (J500)       Labels:* None
   Part No SW: 5Z1 909 144 D    HW: 5Z1 909 144 
   Component: EPS_ECU       401 4040  
   Coding: 004F
   Shop #: WSC 07456 790 50316
   ASAM Dataset: EV_SteerAssisNSKGen2 005107
   ROD: EV_SteerAssisNSKGen2_005.rod
   VCID: 3F8C7B60A67DBDBEB3-806A

2 Faults Found:
0054 - Steering angle sensor 
          B1168 54 [137] - Missing Calibration / Basic Setting
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Mileage: 40337 km
                    Date: 2035.14.17
                    Time: 04:15:26

                    Single Additional Freeze Frame: 

0047 - Steering End Stops Not Learned 
          C10AC F0 [137] - Unknown Error Elaboration
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Mileage: 40337 km
                    Date: 2035.14.17
                    Time: 04:15:26

                    Single Additional Freeze Frame: 


-------------------------------------------------------------------------------
Address 56: Radio (J503)       Labels: None
   Part No SW: 5Z0 035 160 A    HW: 5Z0 035 160 A
   Component: MIBGLAM       H11 0039  
   Revision: RB101000    Serial number: VWZ7Z2R3032201
   Coding: 00000400020000
   Shop #: WSC 07456 790 50316
   VCID: 2F6C2B207E1D4D3E23-807A

No fault code found.

End-------------------------(Elapsed Time: 03:08)--------------------------
Tried so many procedures here that I am lost :(
What´s more concerning to me is the following:
Please consider that VCDS isn´t "recommending" in a popup any security code, so I am using the wide spread 40168 one, which is actually accepted
Foto - Google Fotos - Google Chrome.jpg
This is done in ABS 03 module - Security access - then Basic Settings
If I do not enter the code, this basic setting shows "ERROR: Security access required".
Tried while driving and still and the same.
Can some one help?
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Polo 6R ABS CODING

Post by iichel »

are you holding the steering wheel straight?
EdgardoRodriguez
Getting There!
Posts: 56
Joined: Tue Feb 27, 2018 5:31 pm
Drives: other
Location: Argentina

Re: Polo 6R ABS CODING

Post by EdgardoRodriguez »

iichel wrote: Tue Apr 17, 2018 8:57 pm are you holding the steering wheel straight?
For sure. also drove for more or less 100 meters and then done the same no success (at 15km/h aprox, no higher than 20). Tried 30 deg left, then right, then center and the same
Also removed the battery for a while with steer straight, then connect again, tried the same with full left and full right.
User avatar
Jay-Jay
Silver Member
Posts: 300
Joined: Mon May 02, 2016 6:02 pm
Drives: Polo 6R HL 1.2TSI 77kw, Audi S1 MY2018
Location: Rome (Italy)

Re: Polo 6R ABS CODING

Post by Jay-Jay »

Did you check if your steering angle sensor can see the rotation of your steering wheel (in Meas. Blocks)?
Even if you didn't set the zero in Basic Settings, a properly working sensor should read something and show it to you.
EdgardoRodriguez
Getting There!
Posts: 56
Joined: Tue Feb 27, 2018 5:31 pm
Drives: other
Location: Argentina

Re: Polo 6R ABS CODING

Post by EdgardoRodriguez »

Jay-Jay wrote:Did you check if your angle steering wheel sensor can see the rotation of your steering wheel (in Meas. Blocks)?
Even if you didn't set the zero in Basic Settings, a properly working sensor should read something and show it to you.
It does
ImageImageImage
The sensor can't possibly be faulty. These errors are present since automatic abs recoding. I have never seen any fault in esp / abs module


Enviado desde mi iPhone utilizando Tapatalk
User avatar
Jay-Jay
Silver Member
Posts: 300
Joined: Mon May 02, 2016 6:02 pm
Drives: Polo 6R HL 1.2TSI 77kw, Audi S1 MY2018
Location: Rome (Italy)

Re: Polo 6R ABS CODING

Post by Jay-Jay »

It's strange the sensor has become faulty after the ABS Unit lost its coding.
Can you try with another VCDS version (18.1.0 or older than yours)?
EdgardoRodriguez
Getting There!
Posts: 56
Joined: Tue Feb 27, 2018 5:31 pm
Drives: other
Location: Argentina

Re: Polo 6R ABS CODING

Post by EdgardoRodriguez »

Jay-Jay wrote:It's strange the sensor has become faulty after the ABS Unit lost its coding.
Can you try with another VCDS version (18.1.0 or older than yours)?
May be I can
Mine is 17.8
I will give it a try later.
I am sure the sensor ain't physically faulty, it's just impossible cause I haven't made any physical thing. I just need to bypass this test aborted due to safety reasons


Enviado desde mi iPhone utilizando Tapatalk
EdgardoRodriguez
Getting There!
Posts: 56
Joined: Tue Feb 27, 2018 5:31 pm
Drives: other
Location: Argentina

Re: Polo 6R ABS CODING

Post by EdgardoRodriguez »

Jay-Jay wrote:It's strange the sensor has become faulty after the ABS Unit lost its coding.
Can you try with another VCDS version (18.1.0 or older than yours)?
Tried 17.1 and the same exact problem. Aborted safety reasons..
Also tried again several times calibration procedure of performing short test drives and no luck.
Any leads??


Enviado desde mi iPhone utilizando Tapatalk
firegrafik
Bronze Member
Posts: 205
Joined: Thu Jan 28, 2016 10:23 am
Drives: 6R 1,6MPI(CFNA) sedan
Location: Buzuluk, Orenburg region, Russia
Contact:

Re: Polo 6R ABS CODING

Post by firegrafik »

My friend had same fault. His issue was because he changed steering wheel and slip-ring accidentally had been rotated half turn from zero position.
EdgardoRodriguez
Getting There!
Posts: 56
Joined: Tue Feb 27, 2018 5:31 pm
Drives: other
Location: Argentina

Re: Polo 6R ABS CODING

Post by EdgardoRodriguez »

firegrafik wrote:My friend had same fault. His issue was because he changed steering wheel and slip-ring accidentally had been rotated half turn from zero position.
Hi !
I swear that I haven't even disassembled the steering wheel.
But when the unit recoded itself wheels where pointing straight ahead. So now measures while in the same position throws some thing like -720
Perhaps I need to turn all the way left and trigger another self zeroing to the sensor begin reading something nearer to 0?
Then run adaptation again ?


Enviado desde mi iPhone utilizando Tapatalk
EdgardoRodriguez
Getting There!
Posts: 56
Joined: Tue Feb 27, 2018 5:31 pm
Drives: other
Location: Argentina

Re: Polo 6R ABS CODING

Post by EdgardoRodriguez »

firegrafik wrote:My friend had same fault. His issue was because he changed steering wheel and slip-ring accidentally had been rotated half turn from zero position.
I totally confirmed by g85 sensor Is integrated in esp sensor. Do you known any security access code to test ? Tried several without success.


Enviado desde mi iPhone utilizando Tapatalk
Benetnash
New
Posts: 6
Joined: Tue May 01, 2018 5:45 pm
Drives: 2010 Polo 6r CGPB
Location: Kraków/Poland

Re: Polo 6R ABS CODING

Post by Benetnash »

Hello,

I'd like to get help with my Polo, problem is ABS Long Coding is all zeros,

Some time ago, there was a problem with an ECU, and as result there was swap of ECU, Instrument Cluster and Immo, everything runing smooth, but
there is no coding in ABS, and when I try to input a code, VCDS says something like this "Coding Rejected. Error 22: Conditions not correct or request sequence error".

here is my AutoScan, I hope some one can help

Code: Select all

Tuesday,01,May,2018,12:40:55:00006
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 18.2.0.3 (x64)
Data version: 20180212 DS287.0
www.Ross-Tech.com

Dealer/Shop Name: FIX

VIN: WVWZZZ6RZAY019004   License Plate: 


Chassis Type: 6R-VW25 (6N0)
Scan: 01 03 04 08 09 15 17 19 25 44 56

VIN: WVWZZZ6RZAY019004   Mileage: 79350km-49305miles

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: Malfunction 0010
04-Steering Angle -- Status: Not registered 0001
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: Malfunction 0010
 
-------------------------------------------------------------------------------
Address 01: Engine (CGP)       Labels: 03E-906-033-AZQ.lbl
   Part No SW: 03E 906 023 L    HW: 03E 906 023 L
   Component: SIMOS91 1.2l 4V     4489  
   Revision: --H04---    Serial number:               
   Coding: 0000071
   Shop #: WSC 00000 000 163936
   VCID: 285F4EA298F31D0470-515A

No fault code found.
Readiness: N/A

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels:. 6R0-907-37x-ESP82.clb
   Part No SW: 6R0 907 379 R    HW: 6R0 907 379 R
   Component: ESP8.2i front H04 0002  
   Revision: --------    
   Coding: 000000000000000000000000000000000000
   Shop #: WSC 02069 000 00000
   VCID: 4D91DF3610D1182CA3-8018

2 Faults Found:
03306 - Coding Not Valid 
            000 -  - 
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 0
                    Fault Frequency: 6
                    Reset counter: 78
                    Mileage: 79356 km
                    Time Indication: 0
                    Date: 2012.09.21
                    Time: 12:18:10

             Freeze Frame:
                    Hex Value: 0x0003
                    Hex Value: 0x0002
                    Hex Value: 0x32E7
                    Hex Value: 0x2598
                    Hex Value: 0x007F
                    Hex Value: 0x7F7F
                    Hex Value: 0x7F00
                    Hex Value: 0x0000

01042 - Control Module; Not Coded 
            000 -  - 
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 0
                    Fault Frequency: 2
                    Reset counter: 78
                    Mileage: 79356 km
                    Time Indication: 0
                    Date: 2012.09.21
                    Time: 12:23:26

             Freeze Frame:
                    Hex Value: 0x0007
                    Hex Value: 0x0002
                    Hex Value: 0x3211
                    Hex Value: 0x1498
                    Hex Value: 0x007F
                    Hex Value: 0x7F7F
                    Hex Value: 0x7F00
                    Hex Value: 0x0000


-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301)       Labels: 6R0-820-045-9AP.clb
   Part No SW: 6R0 820 045     HW: 6R0 820 045 
   Component: Climatic       23 0500  
   Revision: 00 09 23    
   VCID: 6BD571AE8A85F61CDD-803E

1 Fault Found:
16372 - Control Module; Unspecified Internal Error 
            014 - Defective
             Freeze Frame:
                    Fault Status: 01101110
                    Fault Priority: 1
                    Fault Frequency: 1
                    Reset counter: 255
                    Mileage: 15444 km
                    Time Indication: 0
                    Date: 2011.01.02
                    Time: 16:42:59


-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:. 6R0-937-08x-09.clb
   Part No SW: 6R0 937 087 D    HW: 6R0 937 087 D
   Component: BCM PQ25 H+4  H46 0207  
   Revision: BF046001    Serial number: 0147 045100658
   Coding: 3CB82DBF08A10000002000C03F6B0CD8B0C841DF60060000200000000000
   Shop #: WSC 12345 123 61029
   VCID: 3E7388FAA977B3B42A-806A

   Subsystem 1 - Part No SW: 6R0 959 801 R    HW: 6R0 959 801 R  Labels: 6R0-959-801.CLB
   Component: J386__TSG_FT  006 0912 
   Serial number: KU0-KU020.01.1011432
   Coding: 08BC30

   Subsystem 2 - Part No SW: 6R0 959 802 T    HW: 6R0 959 802 T  Labels: 6R0-959-802.CLB
   Component: J387__TSG_BT  006 0912 
   Serial number: KU0-KU002.02.1014646
   Coding: 08BC30

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5K0-959-655.clb
   Part No SW: 6R0 959 655 C    HW: 6R0 959 655 C
   Component: VW10Airbag00L H09 0018  
   Revision: --------    Serial number: 003DW00CD63$
   Coding: 00304C
   Shop #: WSC 124697 483 00190
   ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
   ROD: EV_AirbaVW10BPAVW250.rod
   VCID: 428BFC0AD58FD7544E-8016

   Crash sensor for side airbag: driver side: 
   Serial number: 3572SRB40000AB110A2-

   Crash sensor for side airbag: front passenger side: 
   Serial number: 3582SRB40000AB114A95

   Crash sensor for side airbag: rear: driver side: 
   Serial number: 3516GRB402N9LLFMQ3HH

   Crash sensor for side airbag: rear: passenger side: 
   Serial number: 3526GRB402V9LLFMKJS4

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5K0-920-xxx-17.clb-SRI1
   Part No SW: 6R0 920 860 A    HW: 6R0 920 860 A
   Component: KOMBI         H23 0110  
   Serial number: 00000000000000
   Coding: 140A00
   Shop #: WSC 12345 123 61029
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04040
   ROD: EV_Kombi_UDS_VDD_RM09_004_VW25.rod
   VCID: 326BACCA652F67D4DE-8066

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:. 6N0-909-901-6R.clb
   Part No SW: 6N0 909 901     HW: 6R0 937 087 D
   Component: GW-K-CAN TP20 0207  
   Coding: 000100
   Shop #: WSC 12345 123 61029
   VCID: 70EF66C2A3A315C4E8-8024

1 Fault Found:
01044 - Control Module Incorrectly Coded 
            000 -  - 
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 2
                    Fault Frequency: 2
                    Reset counter: 255
                    Mileage: 79356 km
                    Time Indication: 0
                    Date: 2012.09.20
                    Time: 23:54:45


-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels:. 5K0-920-xxx-25.clb
   Part No SW: 6R0 920 860 A    HW: 6R0 920 860 A
   Component: IMMO          H23 0110  
   Serial number:               
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03004
   ROD: EV_Immo_UDS_VDD_RM09.rod
   VCID: 326BACCA652F67D4DE-8066

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist        Labels: 6Q0-423-156.clb
   Part No: 6R0 423 156 A
   Component: LenkhilfeTRW        V275  
   Coding: 11241
   Shop #: WSC 06402  
   VCID: 2E53B8BAED174334BA-807A

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio (J503)       Labels:. 5M0-035-1xx-56.clb
   Part No SW: 5M0 035 186 AA    HW: 5M0 035 186 AA
   Component: Radio RCD310  013 0036  
   Revision: 01000000    Serial number: VWZ1Z2I6253963
   Coding: 0500040004
   Shop #: WSC 124697 483 00190
   VCID: 6BD571AE8A85F61CDD-803E

4 Faults Found:
00876 - Treble Speaker Rear Left (R14) 
            011 - Open Circuit
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 60
                    Mileage: 78828 km
                    Time Indication: 0
                    Date: 2012.09.14
                    Time: 13:33:19

00877 - Treble Speaker Rear Right (R16) 
            011 - Open Circuit
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 60
                    Mileage: 78828 km
                    Time Indication: 0
                    Date: 2012.09.14
                    Time: 13:33:19

00821 - Antenna 2 for Radio (R93) 
            011 - Open Circuit
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 60
                    Mileage: 78828 km
                    Time Indication: 0
                    Date: 2012.09.14
                    Time: 13:33:25

03138 - Input AUX IN 
            011 - Open Circuit
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 68
                    Mileage: 79192 km
                    Time Indication: 0
                    Date: 2012.09.16
                    Time: 13:53:48


End-------------------------(Elapsed Time: 02:04)--------------------------
There is also wrong coding in CAN Gateway, any sugestions?
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Polo 6R ABS CODING

Post by iichel »

Gateway:
4 Doors: 002200
2 Doors: 002000
Post Reply