IMPORTANT ALL MEMBERS

All members need to read the following page The new General Data Protection Regulations 2018 (GDPR)

Failure to read and accept the new privacy policy may result in your account being deleted, so please take a quick read

Cheers

The UK-Polos.NET Admin Team

UPGRADING BCM 6R

Chat about your 6R/6C model Polos here!
User avatar
ciclo
Bling Bling Diamond Member
Posts: 4176
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R '13
Location: Earth ♥, Spain ☼
Contact:

Re: UPGRADING BCM 6R

Post by ciclo » Tue Feb 20, 2018 5:45 pm

raghav.rithvik wrote:
Tue Feb 20, 2018 1:03 pm
Update : managed to get the mirrors working as intended using 1400B3 for RHD mirror.
viewtopic.php?f=56&t=69603&start=105#p529605

:wink: ... :lol:

Maybe you did not know that I solve problems before they happen. :mrgreen:

raghav.rithvik
New
Posts: 9
Joined: Thu Jan 04, 2018 2:56 am
Drives: Polo 6r 1.2 TSI DSG
Location: India

Re: UPGRADING BCM 6R

Post by raghav.rithvik » Wed Feb 21, 2018 2:53 am

iichel wrote:
Tue Feb 20, 2018 3:42 pm
i was probably looking at esp8.2i but you need esp9.0i.

pin 12 of the 38-pin connector to the ABS unit goes to pin 4 of the 6-pin connector of the push button.
pin 5 of the 6-pin connector of the push button goes to a +15 (ignition switched 12V, pin 28 blue/black wire of the ABS connector)
pin 6 of the 6-pin connector of the push button goes to a ground point, i.e. connect it to the dash cross member
pin 3 of the 6-pin connector of the push button goes to the button illumination signal (i.e. grey/blue wire in the T28 pin connector of the door wiring loom)
Thank you! I will try this today & revert.
ciclo wrote:
Tue Feb 20, 2018 5:45 pm
raghav.rithvik wrote:
Tue Feb 20, 2018 1:03 pm
Update : managed to get the mirrors working as intended using 1400B3 for RHD mirror.
viewtopic.php?f=56&t=69603&start=105#p529605

:wink: ... :lol:

Maybe you did not know that I solve problems before they happen. :mrgreen:
Got confused with the next post! Anyway, everything works as intended! Thanks!

User avatar
ciclo
Bling Bling Diamond Member
Posts: 4176
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R '13
Location: Earth ♥, Spain ☼
Contact:

Re: UPGRADING BCM 6R

Post by ciclo » Wed Feb 21, 2018 11:14 am

Thanks to you for sharing your experience, it'll be very useful for others.

raghav.rithvik
New
Posts: 9
Joined: Thu Jan 04, 2018 2:56 am
Drives: Polo 6r 1.2 TSI DSG
Location: India

Re: UPGRADING BCM 6R

Post by raghav.rithvik » Thu Feb 22, 2018 2:36 am

iichel wrote:
Tue Feb 20, 2018 3:42 pm
i was probably looking at esp8.2i but you need esp9.0i.
.... T28 pin connector of the door wiring loom)
Got the switch working. Thank you

raghav.rithvik
New
Posts: 9
Joined: Thu Jan 04, 2018 2:56 am
Drives: Polo 6r 1.2 TSI DSG
Location: India

Re: UPGRADING BCM 6R

Post by raghav.rithvik » Mon Mar 12, 2018 5:32 am

Could you guys help me with the coding for rain closing? Is it possible with my BCM?

User avatar
ciclo
Bling Bling Diamond Member
Posts: 4176
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R '13
Location: Earth ♥, Spain ☼
Contact:

Re: UPGRADING BCM 6R

Post by ciclo » Mon Mar 12, 2018 6:28 am

raghav.rithvik wrote:
Mon Mar 12, 2018 5:32 am
Could you guys help me with the coding for rain closing? Is it possible with my BCM?

Code: Select all

   Subsystem 1 - Part No: 5K7 955 559 B  Labels: 5K7-955-559.CLB

   Component: RLS 081215 03  37  0059 

   Coding: 0368DD
Try it with this new coding for RLS.
0668DD

Report the result.

raghav.rithvik
New
Posts: 9
Joined: Thu Jan 04, 2018 2:56 am
Drives: Polo 6r 1.2 TSI DSG
Location: India

Re: UPGRADING BCM 6R

Post by raghav.rithvik » Tue Mar 13, 2018 6:38 am

Thanks. Rain closing works with the provided coding.

User avatar
ciclo
Bling Bling Diamond Member
Posts: 4176
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R '13
Location: Earth ♥, Spain ☼
Contact:

Re: UPGRADING BCM 6R

Post by ciclo » Tue Mar 13, 2018 7:00 am

Perfect. 8)

raghav.rithvik
New
Posts: 9
Joined: Thu Jan 04, 2018 2:56 am
Drives: Polo 6r 1.2 TSI DSG
Location: India

Re: UPGRADING BCM 6R

Post by raghav.rithvik » Wed Mar 14, 2018 2:06 am

On further testing, it turns out that only the front windows & mirrors close. The rear windows don't go up for rain closing (however they do work on comfort function)

Also, is there a way to enable/disable rain closing from the IC (maxi-dot)?

User avatar
ciclo
Bling Bling Diamond Member
Posts: 4176
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R '13
Location: Earth ♥, Spain ☼
Contact:

Re: UPGRADING BCM 6R

Post by ciclo » Thu Mar 15, 2018 7:55 am

raghav.rithvik wrote:
Wed Mar 14, 2018 2:06 am
Also, is there a way to enable/disable rain closing from the IC (maxi-dot)?
No.

raghav.rithvik
New
Posts: 9
Joined: Thu Jan 04, 2018 2:56 am
Drives: Polo 6r 1.2 TSI DSG
Location: India

Re: UPGRADING BCM 6R

Post by raghav.rithvik » Thu Mar 15, 2018 9:24 am

raghav.rithvik wrote:
Wed Mar 14, 2018 2:06 am
On further testing, it turns out that only the front windows & mirrors close. The rear windows don't go up for rain closing (however they do work on comfort function)
Anything to make the rear windows go up?

User avatar
ciclo
Bling Bling Diamond Member
Posts: 4176
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R '13
Location: Earth ♥, Spain ☼
Contact:

Re: UPGRADING BCM 6R

Post by ciclo » Thu Mar 15, 2018 11:21 am

000020 Test this coding in both rear WRMs.

Set the comfort function with the window switches.

Good luck! (it would be a miracle if it works)

raghav.rithvik
New
Posts: 9
Joined: Thu Jan 04, 2018 2:56 am
Drives: Polo 6r 1.2 TSI DSG
Location: India

Re: UPGRADING BCM 6R

Post by raghav.rithvik » Mon Mar 19, 2018 9:38 am

ciclo wrote:
Thu Mar 15, 2018 11:21 am
000020 Test this coding in both rear WRMs.

Set the comfort function with the window switches.

Good luck! (it would be a miracle if it works)
Coding out of range

govindsharma
Getting There!
Posts: 85
Joined: Thu Mar 03, 2016 3:17 pm
Drives: polo 1.2 petrol HighLine
Location: india

Re: UPGRADING BCM 6R

Post by govindsharma » Thu Mar 22, 2018 2:58 pm

Good Evening
Can anyone tell me about this part no. 6RG 051 232.Dear Said that this is VW radio which is made by Blaupunkt model no Philadelphia 835 .Sir please tell me can it work as RNS 510 .(like navigation ,direction, audio and phone function etc in MFD.).

Thank you.

User avatar
ciclo
Bling Bling Diamond Member
Posts: 4176
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R '13
Location: Earth ♥, Spain ☼
Contact:

Re: UPGRADING BCM 6R

Post by ciclo » Thu Mar 22, 2018 7:02 pm


Post Reply