UPGRADING BCM 6R

Chat about your 6R/6C model Polos here!
Post Reply
govindsharma
Bronze Member
Posts: 109
Joined: Thu Mar 03, 2016 3:17 pm
Drives: polo 1.2 petrol HighLine
Location: india

Re: UPGRADING BCM 6R

Post by govindsharma »

Dear PDC is there and it is in auto scan.
govindsharma
Bronze Member
Posts: 109
Joined: Thu Mar 03, 2016 3:17 pm
Drives: polo 1.2 petrol HighLine
Location: india

Re: UPGRADING BCM 6R

Post by govindsharma »

Dears
can anyone tell me the part no of small and large fuse terminal connector.

Thank you.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: UPGRADING BCM 6R

Post by ciclo »

Standard Power Timer --- SPT
Junior Power Timer --- JPT
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: UPGRADING BCM 6R

Post by ciclo »

iichel wrote: Sat Nov 11, 2017 3:47 pm if the PDC is on the autoscan, it's connected to CAN :)
Image :lol:
Image
viewtopic.php?f=56&t=69603&start=75#p526944
govindsharma
Bronze Member
Posts: 109
Joined: Thu Mar 03, 2016 3:17 pm
Drives: polo 1.2 petrol HighLine
Location: india

Re: UPGRADING BCM 6R

Post by govindsharma »

Dear Sir
Is it mandatory to align tires after placing new tpms sensor or its ok.

thank you.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: UPGRADING BCM 6R

Post by ciclo »

- Wheel balancing should be done whenever a tire is disassembled.
- Checking wheel alignment is a process that must be done regularly but not specifically when the tires are disassembled.

WHEEL ALIGNMENT AND BALANCING ARE IMPORTANT FOR SAFETY AND MAXIMUM MILEAGE FROM YOUR TIRES! Image
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: UPGRADING BCM 6R

Post by iichel »

...and comfort
govindsharma
Bronze Member
Posts: 109
Joined: Thu Mar 03, 2016 3:17 pm
Drives: polo 1.2 petrol HighLine
Location: india

Re: UPGRADING BCM 6R

Post by govindsharma »

Thank you Dear.
govindsharma
Bronze Member
Posts: 109
Joined: Thu Mar 03, 2016 3:17 pm
Drives: polo 1.2 petrol HighLine
Location: india

Re: UPGRADING BCM 6R

Post by govindsharma »

Dear Ciclo Sir
Good Evening I had installed TPMS Antenna in my car today and found that there is inbuilt tire measurement is 16 17 and 18 and in my car it is 15 inch tire.Dear please tell me how can i get rid of this.

Thank you.
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: UPGRADING BCM 6R

Post by iichel »

Use the rdks editor from Skoda pilot to make new config file and flash with vcp

viewtopic.php?f=56&t=58703&start=3645#p525012
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: UPGRADING BCM 6R

Post by ciclo »

govindsharma wrote: Sat Jan 13, 2018 10:23 am Dear Ciclo Sir
Good Evening I had installed TPMS Antenna in my car today and found that there is inbuilt tire measurement is 16 17 and 18 and in my car it is 15 inch tire.Dear please tell me how can i get rid of this.

Thank you.
To configure the parameters to your liking it's necessary to generate a file with a RDKS editor and load them with the original VCP.
However, if any of the parameters already integrated has the wheel pressures that match your tastes or personal needs you can set that parameter. What matters are the pressures, the parameters denomination is only a denomination for your personal information in case you have different sets of wheels (summer / winter)... or other reasons.

Thanks for the images you sent me by email. 8)
You can upload them to the forum if it's your wish.
govindsharma
Bronze Member
Posts: 109
Joined: Thu Mar 03, 2016 3:17 pm
Drives: polo 1.2 petrol HighLine
Location: india

Re: UPGRADING BCM 6R

Post by govindsharma »

Dear Good Morning
Can VW Service Center modify its config file for 15 inch tire or its with only VCP pro.

Image
Image

Thank you.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: UPGRADING BCM 6R

Post by ciclo »

I'm afraid that a VW dealer can't do this job with the ODIS on your 6R ... or should not, because this TPMS unit isn't considered as original equipment for your 6R.
Buy original VCP or find someone in India near you with the original VCP. Loading the file with the parameters to your taste for your RDKS unit doesn't take more than two minutes.
I can do it free for you if you send me the RDKS unit ... but it would take a huge amount of time (India to Spain and back), I don't think it is the best solution.
govindsharma
Bronze Member
Posts: 109
Joined: Thu Mar 03, 2016 3:17 pm
Drives: polo 1.2 petrol HighLine
Location: india

Re: UPGRADING BCM 6R

Post by govindsharma »

Dear Good Evening
Here is the final result in my car of TPMS.I had installed all parts of TPMS today with Antenna and tire sensors.I had given power to Antenna from fuse 17 which is vacant. CAN high and low from PDC unit.Dear all is working well. But please tell me if air is low in any of the tire then where it indicate either in IC with low pressure indicator or in four wheel figure which is in MFD.

Image

Thank you.
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: UPGRADING BCM 6R

Post by iichel »

i'm not sure about SB17, it's listed as the fuse for the windscreen washer pump.
it it can be OK. i think it should be a +30 (constant power) for the TPMS high.
Post Reply