UPGRADING BCM 6R

Chat about your 6R/6C model Polos here!
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7788
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: UPGRADING BCM 6R

Post by ciclo »

User avatar
ciclo
Bling Bling Diamond Member
Posts: 7788
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: UPGRADING BCM 6R

Post by ciclo »

benzinkopf wrote: Sat Jun 16, 2018 8:00 pm
ciclo wrote:
iichel wrote: Sat Jun 16, 2018 7:36 pm The german basically says:

wires or wire ?

Code: Select all

mitgeliefertes
“ein......Kabel”
so it should be single wire.

btw. i think i bought the same AFS wiring from the same seller last time. As the wiring is made for LHD. i have to take out the terminal pins from the 26pin afs connector and switch the position from LHD to RHD, for one reason:
1) the length of wires provided is of coz opposite for Left and Right.

Sent from my iPhone using Tapatalk
Ok, thanks for the warning. :wink:
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: UPGRADING BCM 6R

Post by iichel »

ciclo wrote: Sat Jun 16, 2018 8:03 pm Thanks!

So the right one is .... https://www.ebay.com/itm/VW-Polo-V-6R-X ... xylpNTRTVy
Yes, but the item from tuning fanatics shop will get you the exact same wiring. :mrgreen: But they don't have the correct photo in their advertisement (they also write this in their description).
benzinkopf
Gold Member
Posts: 859
Joined: Wed Apr 02, 2014 4:01 pm
Drives: 1.2TSI 105HP DSG7
Location: Malaysia

Re: UPGRADING BCM 6R

Post by benzinkopf »

it may not bring any harm with the LHD or RHD as our bixenon leveling is just up & down, so it will still work. correct me if i’m wrong: but as there is adaptation settings to manually offset the motor position of each headlight, i believe it is necessary to correct that so the AFS module knows exactly the left and right headlight.


Sent from my iPhone using Tapatalk
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: UPGRADING BCM 6R

Post by iichel »

benzinkopf wrote: Sat Jun 16, 2018 8:15 pm it may not bring any harm with the LHD or RHD as our bixenon leveling is just up & down, so it will still work. correct me if i’m wrong: but as there is adaptation settings to manually offset the motor position of each headlight, i believe it is necessary to correct that so the AFS module knows exactly the left and right headlight.


Sent from my iPhone using Tapatalk
I don't think it makes a difference, in ELSA there are no different wirings for left and right hand drive with respect to the AFS wiring.
I'd connect the headlights for a RHD polo the same way as a LHD.
govindsharma
Bronze Member
Posts: 109
Joined: Thu Mar 03, 2016 3:17 pm
Drives: polo 1.2 petrol HighLine
Location: india

Re: UPGRADING BCM 6R

Post by govindsharma »

Thank you all of you sir for your kind help finally i have to buy these two wires.

1.VW Polo 6R ALWR Nachrüstung Kabelbaum Adapter cable harness. https://www.ebay.in/itm/170982304945?Vi ... SI:IN:1123
2.VW Polo V 6R Xenon Bi-Xenon Adapter Kabelbaum Kabel cable wiring https://www.ebay.in/itm/171296258148?Vi ... SI:IN:1123

Sir I have to take out 4 wire from BCM, 2 of cornering lights that i have to joint together and insert to SB54 a fuse and wire from 3rd connector of auto headlight red switch to SB54b fuse. and 2 cable of fog light drls which i had recently connected. ok.

And insert new 6 wires from T10 to T14 wiring to BCM only and leave the BCM intact.No wire from AFS to BCM.

All the wires of AFS is as under that i had understand via diagram that you had provided please check.

T26/2 - can high T32/28
T26/3 - can low T32/29
T26/7 - T4 AW/4 (Rear Axle)
T26/10 - T4 AW/2 (Rear Axle)
T26/11 - T4 AW/1 (Rear Axle)
T26/15 - T14B/1 (MX2 Right Headlight T14 Connector)
T26/20 - T14B/4 (MX2 Right Headlight T14 Connector)
T26/21 - T14B/2 (MX2 Right Headlight T14 Connector)
T26/22 - T14B/3 (MX2 Right Headlight T14 Connector)
T26/16 - T14A/3 (MX1 Left Headlight T14 Connector)
T26/17 - T14A/1 (MX1 Left Headlight T14 Connector)
T26/18 - T14A/4 (MX1 Left Headlight T14 Connector)
T26/19 - T14A/2 (MX1 Left Headlight T14 Connector)
T26/23 - SB13 (POWER)
T26/24 - earth.(EARTH)

Above wiring is ok for AFS and OEM BiXenon Headlights.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7788
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: UPGRADING BCM 6R

Post by ciclo »

govindsharma
Bronze Member
Posts: 109
Joined: Thu Mar 03, 2016 3:17 pm
Drives: polo 1.2 petrol HighLine
Location: india

Re: UPGRADING BCM 6R

Post by govindsharma »

Sir I had found this kind of grommet under my car but it is tottaly sealed and one wire or pipe goes through it.Image

Sent from my SM-G960F using Tapatalk

User avatar
ciclo
Bling Bling Diamond Member
Posts: 7788
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: UPGRADING BCM 6R

Post by ciclo »

The cable you show I think belongs to the ABS sensor/rpm y and obviously the grommet is not the same as this,

Image



Searching in ETKA:

If I select the Polo made in Europe this is the result,
Image

If I select the Polo made in India this is the result,
Image

Therefore, you must find another place to route the wires for AFS sensor.

I don't know if anyone in India did this work in its Polo 6R.
I think iichel used another route for the AFS sensor wires in his 6R.
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: UPGRADING BCM 6R

Post by iichel »

Indeed I did, I used the grommet below the rear left seat.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7788
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: UPGRADING BCM 6R

Post by ciclo »

Thanks for confirmation. :wink:
govindsharma
Bronze Member
Posts: 109
Joined: Thu Mar 03, 2016 3:17 pm
Drives: polo 1.2 petrol HighLine
Location: india

Re: UPGRADING BCM 6R

Post by govindsharma »

iichel Sir can you please show image of that place from where you routed AFS wire.

Thank you.
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: UPGRADING BCM 6R

Post by iichel »

sure thing mate, here you go --> https://imgur.com/a/e6M59o2
govindsharma
Bronze Member
Posts: 109
Joined: Thu Mar 03, 2016 3:17 pm
Drives: polo 1.2 petrol HighLine
Location: india

Re: UPGRADING BCM 6R

Post by govindsharma »

Thank you I had seen this kind of hole is there in my car and that is covered by black groomet.

Sent from my SM-G960F using Tapatalk

User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: UPGRADING BCM 6R

Post by iichel »

Yep the same here. I just punched through it and sealed it against water.
Post Reply