Retrofit Steering with Paddles to Polo 1.6 (Aisin GB)

Chat about your 6R/6C model Polos here!
bladekiller
New
Posts: 11
Joined: Mon May 15, 2017 11:20 am
Drives: 1.6 MPI
Location: Malaysia

Re: Retrofit Steering with Paddles to Polo 1.6 (Aisin GB)

Post by bladekiller »

ciclo wrote: Tue May 16, 2017 11:05 am Welcome,
VCDS autoscan (full), and steering wheel image installed and running.
bladekiller wrote: Upon checking the TCM, I note that pin 13 & 19 is empty. Based on research from the web, these 2 pins should be relevant for paddles to work.

My question is, where do these 2 pins connect to? And what coding is appropriate for this?
Link me to this information. Thanks
Hi ciclo, the fullscan is below. Apologies for the delay.

Code: Select all

Sunday,01,April,2018,19:49:08:52609
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 18.2.0.3 (x64)
Data version: 20180212 DS287.0
www.Ross-Tech.com


VIN: x   License Plate: 


Chassis Type: 60-VW25 (6N0)
Scan: 01 02 03 08 09 15 17 19 25 44

VIN: x   Mileage: 53330km-33137miles

01-Engine -- Status: Malfunction 0010
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine (J623-CLSA)       Labels: None
   Part No SW: 03C 906 014 EK    HW: 03C 906 014 
   Component: CLSA-MM7GV-G  H02 CLSA-MM7GV-G  H02 69176917  
   Revision: --H02---    Serial number:               
   Coding: 001A0014032400080000
   Shop #: WSC 83300 833 00005
   VCID: 6ADBBE7286B26814A6-5140

No Faults Found
  or DTCs not supported by controller
  or a communication error occurred

-------------------------------------------------------------------------------
Address 02: Auto Trans        Labels: 09G-927-750.clb
   Part No SW: 09G 927 750 LK    HW: 09G 927 750 LK
   Component: AQ 250 6F           2601  
   Revision: 00H98000    Serial number:               
   Coding: 0008520
   Shop #: WSC 83300 833 00005
   VCID: 0501EDCE4FECA76C2B-5140

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: Redir Fail!
   Part No SW: 6R0 907 379 BF    HW: 6R0 907 379 AQ
   Component: ABS9.0 front  H01 0001  
   Serial number: --------------
   Coding: 60DD2763412318C00617E471825718000000
   Shop #: WSC 83300 833 00005
   ASAM Dataset: EV_Brake1ABS90BOSCH 003017
   ROD: EV_Brake1ABS90BOSCH_VW25.rod
   VCID: 0305F3D68AD8995C05-8056

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255)       Labels: 6R0-907-044.clb
   Part No SW: 6R0 907 044 P    HW: 6R0 907 044 P
   Component: Climatronic   H12 0614  
   Revision: V0000000    
   VCID: 408F3CDAD34E424458-8014

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:. 6R0-937-08x-09.clb
   Part No SW: 6R0 937 087 R    HW: 6R0 937 087 
   Component: BCM PQ25 H+4  H34 0424  
   Revision: BF034001    Serial number: 0681 196142369
   Coding: 3BB02BBF08A10000003800003C2B1C9000C0414F60040000200000000000
   Shop #: WSC 83300 833 00011
   VCID: 4C9718EAEF069624B4-8018

   Subsystem 1 - Part No SW: 6R0 959 802 AL    HW: 6R0 959 802 AL  Labels: 6R0-959-802.CLB
   Component: -------------  006 5560 
   Serial number: 13102576140604204658
   Coding: 010000

   Subsystem 2 - Part No SW: 6R0 959 801 AH    HW: 6R0 959 801 AH  Labels: 6R0-959-801.CLB
   Component: -------------  006 5560 
   Serial number: 13202579140604203140
   Coding: 010000

   Subsystem 3 - Part No SW: 31G 959 442     HW: 31G 959 442 
   Component: E221__MFL-TAT  H06 0023 
   Serial number: 2421611332400361CX3J
   Coding: 250000

   Subsystem 4 - Part No SW: 6R0 959 811 L    HW: 6R0 959 811 L
   Component: -------------  006 5560 
   Serial number: 13202580140618015839
   Coding: 020000

   Subsystem 5 - Part No SW: 6R0 959 812 L    HW: 6R0 959 812 L
   Component: -------------  006 5560 
   Serial number: 13102581140804092028
   Coding: 020000

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5K0-959-655.clb
   Part No SW: 6R0 959 655 J    HW: 6R0 959 655 J
   Component: VW10AirbagU0F H10 0020  
   Revision: --------    Serial number: 003GW00VGPPJ
   Coding: 003046
   Shop #: WSC 83300 833 00005
   ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
   ROD: EV_AirbaVW10BPAVW250.rod
   VCID: 499921FEE874830C8F-801C

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5K0-920-xxx-17.clb-SRI1
   Part No SW: 6RF 920 860 Q    HW: 6RF 920 860 Q
   Component: KOMBI         H02 0152  
   Serial number: 00000000000000
   Coding: 140A00
   Shop #: WSC 83300 833 00005
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04719
   ROD: EV_Kombi_UDS_VDD_RM09_004_VW25.rod
   VCID: 58BFF4BA23DEEA8400-800C

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:. 6N0-909-901-6R.clb
   Part No SW: 6N0 909 901     HW: 6R0 937 087 
   Component: GW-K-CAN TP20 H34 0424  
   Revision: BF034001    
   Coding: 002300
   Shop #: WSC 83300 833 00011
   VCID: 70EFAC1AA36E92C4E8-8024

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels:| 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234 
   Component: IMMO          H02 0152  
   Serial number:               
   Coding: 000000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03709
   ROD: EV_Immo_UDS_VDD_RM09.rod
   VCID: 6ADBBE728DB26814A6-803E

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist (J500)       Labels:| 1Sx-909-144-44.clb
   Part No SW: 1S2 909 144 P    HW: 1S2 909 144 P
   Component: EPS_ECU       H61 1702  
   Coding: 0001000000010000
   Shop #: WSC 83300 833 00001
   ASAM Dataset: EV_SteerAssisNSK 014008
   ROD: EV_SteerAssisNSK_014.rod
   VCID: 418939DED0444B4C57-8014

No fault code found.

End-------------------------(Elapsed Time: 02:26)--------------------------
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7787
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: Retrofit Steering with Paddles to Polo 1.6 (Aisin GB)

Post by ciclo »

Excellent!
Thanks for posting the Autoscan one year later.
I suppose you live outside of our solar system.
I'm excited, it's my first extraterrestrial contact.
I will post my answer to your question immediately, I guess you will receive it within a year. :lol:

Now seriously, please tell me what you have tried so far to try to make work the paddle shifters with your automatic gearbox. Thanks.

I will wait for your reply... Image
bladekiller
New
Posts: 11
Joined: Mon May 15, 2017 11:20 am
Drives: 1.6 MPI
Location: Malaysia

Re: Retrofit Steering with Paddles to Polo 1.6 (Aisin GB)

Post by bladekiller »

ciclo wrote: Sat May 19, 2018 6:28 am Excellent!
Thanks for posting the Autoscan one year later.
I suppose you live outside of our solar system.
I'm excited, it's my first extraterrestrial contact.
I will post my answer to your question immediately, I guess you will receive it within a year. :lol:

Now seriously, please tell me what you have tried so far to try to make work the paddle shifters with your automatic gearbox. Thanks.

I will wait for your reply... Image
Yeah I know it’s a year late, haha. Just got time to get it done up.
So far I have only tried various codings but to no avail.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7787
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: Retrofit Steering with Paddles to Polo 1.6 (Aisin GB)

Post by ciclo »

Ok, I'll have to review the Elsawin diagrams and other information ... wait please.
bladekiller
New
Posts: 11
Joined: Mon May 15, 2017 11:20 am
Drives: 1.6 MPI
Location: Malaysia

Re: Retrofit Steering with Paddles to Polo 1.6 (Aisin GB)

Post by bladekiller »

ciclo wrote: Sat May 19, 2018 6:39 am Ok, I'll have to review the Elsawin diagrams and other information ... wait please.
Thanks.. my friend and I also went through Elsawin quite extensively. Hopefully we are able to get a breakthrough :idea:
peter_dk25
Silver Member
Posts: 461
Joined: Wed Jun 18, 2014 6:58 am
Drives: Blue GT
Location: Denmark

Re: Retrofit Steering with Paddles to Polo 1.6 (Aisin GB)

Post by peter_dk25 »

ciclo wrote: Sat May 19, 2018 6:28 am Excellent!
Thanks for posting the Autoscan one year later.
I suppose you live outside of our solar system.
I'm excited, it's my first extraterrestrial contact.
I will post my answer to your question immediately, I guess you will receive it within a year. :lol:

Now seriously, please tell me what you have tried so far to try to make work the paddle shifters with your automatic gearbox. Thanks.

I will wait for your reply... Image
Funny :)
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7787
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: Retrofit Steering with Paddles to Polo 1.6 (Aisin GB)

Post by ciclo »

http://www.mytiguan.com/index.php?/topi ... n-not-dsg/ (Hugs to Ruben :))

Please, take screenshots or images from these drop-down menus in Engine unit. Byte1

Image
bladekiller
New
Posts: 11
Joined: Mon May 15, 2017 11:20 am
Drives: 1.6 MPI
Location: Malaysia

Re: Retrofit Steering with Paddles to Polo 1.6 (Aisin GB)

Post by bladekiller »

ciclo wrote: Sun May 20, 2018 6:44 am http://www.mytiguan.com/index.php?/topi ... n-not-dsg/ (Hugs to Ruben :))

Please, take screenshots or images from these drop-down menus in Engine unit. Byte1

Image
The variant we have here does not support engine long coding helper.
bladekiller
New
Posts: 11
Joined: Mon May 15, 2017 11:20 am
Drives: 1.6 MPI
Location: Malaysia

Re: Retrofit Steering with Paddles to Polo 1.6 (Aisin GB)

Post by bladekiller »

bump..
Rex-17
New
Posts: 1
Joined: Sat Sep 25, 2021 3:22 pm
Drives: polo mpi 1.6
Location: Bangi

Re: Retrofit Steering with Paddles to Polo 1.6 (Aisin GB)

Post by Rex-17 »

U need to use any vw steering paddle shift 2018 above
Post Reply