Polo 6R by RekinPoznan

Chat about your 6R/6C model Polos here!
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: Polo 6R by RekinPoznan

Post by ciclo »

From 0:30 to 0:38 sec.



The rest is explained in the diagram (diode).

Image
Image
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: Polo 6R by RekinPoznan

Post by ciclo »

RekinPoznan wrote: Tue Oct 24, 2017 4:33 pm Hello

Lookong ....
Image
:?:
User avatar
RekinPoznan
Getting There!
Posts: 69
Joined: Mon Apr 25, 2016 4:39 pm
Drives: 6R
Location: Poland

Re: Polo 6R by RekinPoznan

Post by RekinPoznan »

Hi

Lookong hehehe sory for errors....

Thanks for fast answer so make now wire ;) , looking for BCM , stalks are buyed , mirror with camera are installed ;).


Best regards Chriss
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: Polo 6R by RekinPoznan

Post by ciclo »

RekinPoznan wrote: Wed Oct 25, 2017 4:42 pm Lookong hehehe sory for errors....
I thought you meant LOL KONG. Yes, "o" and "i" are near on the keyboard.

:lol:
User avatar
RekinPoznan
Getting There!
Posts: 69
Joined: Mon Apr 25, 2016 4:39 pm
Drives: 6R
Location: Poland

Re: Polo 6R by RekinPoznan

Post by RekinPoznan »

Tooday stalks received , preparing to install ;)

Image
Image
Image
Image

7E0937090B are good for HBA , and new type of MFSW from 6C ?

Best regards Chriss
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: Polo 6R by RekinPoznan

Post by ciclo »

Yes. (both)

BCM adaptation channel 54 , from 0 to 1, to make work the highbeam stalk with return spring.
User avatar
RekinPoznan
Getting There!
Posts: 69
Joined: Mon Apr 25, 2016 4:39 pm
Drives: 6R
Location: Poland

Re: Polo 6R by RekinPoznan

Post by RekinPoznan »

Thanks one day I must make toogether MFSW , HBA and replace BCM. ;)
User avatar
RekinPoznan
Getting There!
Posts: 69
Joined: Mon Apr 25, 2016 4:39 pm
Drives: 6R
Location: Poland

Re: Polo 6R by RekinPoznan

Post by RekinPoznan »

Hi friends

Preparing to replace ABS8.2 to ESP9.0i

I looking for coding ESP9.0 for 6R0 907 379AS H03 SW03 i try with this program on screen but no sure the coding is realy correct ?

Image

second question what brake pipe is recomended for my polois i see on ETKA many types.... 6R1614739G and 6R1614740G ??

Image

And for this ESP Unit i have 6R1 614 235 D

Many thanks for help
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Polo 6R by RekinPoznan

Post by iichel »

I'll help out with the coding of ESP9.0i, no problem.
User avatar
RekinPoznan
Getting There!
Posts: 69
Joined: Mon Apr 25, 2016 4:39 pm
Drives: 6R
Location: Poland

Re: Polo 6R by RekinPoznan

Post by RekinPoznan »

Thanks IIchel , What do you think of coding from the screen, there are my data entered there is correct ?
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Polo 6R by RekinPoznan

Post by iichel »

looks to be OK but you cannot be sure until you try it :) the ESP calculator is for sure a great program.
User avatar
RekinPoznan
Getting There!
Posts: 69
Joined: Mon Apr 25, 2016 4:39 pm
Drives: 6R
Location: Poland

Re: Polo 6R by RekinPoznan

Post by RekinPoznan »

What can coding be rejected or does ESP not work properly?
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Polo 6R by RekinPoznan

Post by iichel »

yes, coding can be rejected, especially for the ABS. all the parameters need to be correct (brand, type, VIN, engine type). and then it's sometimes still a little puzzle.
User avatar
RekinPoznan
Getting There!
Posts: 69
Joined: Mon Apr 25, 2016 4:39 pm
Drives: 6R
Location: Poland

Re: Polo 6R by RekinPoznan

Post by RekinPoznan »

Hi

When change BCM from 7H0937090 to 7E0937090B is recomended copy and paste long codnig , or must be step by step coded ?


Best regards Chriss
User avatar
RekinPoznan
Getting There!
Posts: 69
Joined: Mon Apr 25, 2016 4:39 pm
Drives: 6R
Location: Poland

Re: Polo 6R by RekinPoznan

Post by RekinPoznan »

Hi

Why after change BCM I have active adress: 61 ? with 7E0 907 534 , in gateway list is not marked.


Many thanks Chriss
Post Reply