Hi Ciclo,
My lamps are working fine now.
As you know, I'm waiting for halogen bulbs to come in to replace the existing LED bulbs I use for cornering lights.
So I would expect errors(if any) from cornering lights.
However, errors are captured in BCM module when I activate high beam.
The code brings out "M30" and "M32", which are high beam bulbs bulbs in halogen headlights.
Is this intended, in the case of retrofit?
There's no error when cornering lights are activated.
That means to the BCM, cornering lights= high beam and vice versa?
Code: Select all
2 Faults Found:
01495 - Bulb for High-Beams; Left (M30)
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 3
Fault Frequency: 1
Reset counter: 10
Mileage: 100245 km
Time Indication: 0
Date: 2012.03.14
Time: 00:12:04
01499 - Bulb for High-Beams; Right (M32)
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 3
Fault Frequency: 1
Reset counter: 10
Mileage: 100245 km
Time Indication: 0
Date: 2012.03.14
Time: 00:12:04