Dashboard swap! Seat Toledo Instrument Cluster on Cross Polo 6R

[gtsportms]

Hey i have a quick question,

will a 6R IC Fit in a 6C IC Housing? Or Only the front of the 6C IC ?

thx

Hi gtsportms,
It will not fit without adjustments!
It's necessary to cut a lot of plastic inside..

thanks for the answer, have you done it ?

[MaDwArLoCk]

thanks for the answer, have you done it ?

U r welcome!
Yep, check the first post.

[MaDwArLoCk]

[federicodrdpro]

Which version of Super VAG do you use?

[MaDwArLoCk]

Hi federicodrdpro,
I’m using version 2016.3

[gtsportms]

To bad i dont speak the russian or polish language

[spacewalker]

To bad i dont speak the russian or polish language

I can talk PL.
what you want ?

[MaDwArLoCk]

Direct TPMS / RKDS

Finally i can remove this mod from my wishlist!

Necessary parts:

• 4x Universal TPMS sensors with programming PAD
  Those sensors could be programmed for almost any EU car.
  Interesting solution and cheapper then original sensors
  I found some good reviews and decided to try

• Wiring loom
  I ordered it from AliExpress

• TPMS unit itself
  As we know correct TPMS unit shoul be 3AA907273F but it's pretty hard to find and new one is a bit expensive.
  So i found used unit from VW Tiguan on local auto-demontage for very good price.
  This unit has different OE nuber but HW is the same like 3AA907273F, what means that it simply could be reflashed.
  
  Fernando helped me a lot! He offered to help me with the re-flashing, and literally in a week I had module with correct firmware!
  For this I am very grateful to him! Thank you Fernando!

• Notice!
  To make it all work, should be installed BCM 7H0/7E0 with available
  65 address in the gateway list.
  And MFA+ Instrument cluster with FW 0709 or higher!

As expected, my Seat cluster with firmware 0607 does not support TPMS.
But by a lucky chance I found BlueGT cluster 6R0920870E with firmware 0709




TPMS module was placed behind the rear bumper






Programming sensors


With MaxiTPMS PAD we can read wirelessly (even from mounted sensor) this info:
Sensor ID
Temperature
Pressure
Battery voltage (by my mind it's the most useful)



Mounting sensor into the wheel!


and finally I've got the long-awaited picture on the screen!

[smg_shardul]

Direct TPMS / RKDS

Finally i can remove this mod from my wishlist!

Necessary parts:

• 4x Universal TPMS sensors with programming PAD
  Those sensors could be programmed for almost any EU car.
  Interesting solution and cheapper then original sensors
  I found some good reviews and decided to try

• Wiring loom
  I ordered it from AliExpress

• TPMS unit itself
  As we know correct TPMS unit shoul be 3AA907273F but it's pretty hard to find and new one is a bit expensive.
  So i found used unit from VW Tiguan on local auto-demontage for very good price.
  This unit has different OE nuber but HW is the same like 3AA907273F, what means that it simply could be reflashed.
  
  Fernando helped me a lot! He offered to help me with the re-flashing, and literally in a week I had module with correct firmware!
  For this I am very grateful to him! Thank you Fernando!

• Notice!
  To make it all work, should be installed BCM 7H0/7E0 with available
  65 address in the gateway list.
  And MFA+ Instrument cluster with FW 0709 or higher!

As expected, my Seat cluster with firmware 0607 does not support TPMS.
But by a lucky chance I found BlueGT cluster 6R0920870E with firmware 0709




TPMS module was placed behind the rear bumper






Programming sensors


With iTPMS PAD we can read wirelessly (even from mounted sensor) this info:
Sensor ID
Temperature
Pressure
Battery voltage (by my mind it's the most useful)



Mounting sensor into the wheel!


and finally I've got the long-awaited picture on the screen!

Excellent job...[emoji106]
Do we need to program sensor before installation?
What device u have used for programming sensor?

Sent from my Pixel 2 using Tapatalk

[MaDwArLoCk]

Thanks, Shardul!

If you installing OEM sensors, it's not necessary in programming!
But if you are going to install Universal sensors (like i did) you need to programm them!
Part number you can choose from the list. In my case it was 3AA907275D

I bought a set 4x sensor + Programming device (MaxiTPMS PAD)

[ciclo]

Good Job!

3AA907275D sensors were replaced by 3AA907275F sensors.
In case you want to change the software to your sensors with the magic tool ... .

(Warning TEST...)

[MaDwArLoCk]

Thank you, Fernando!

There wasn’t such option to programm 3AA907275F.
Available only 3AA907275 and 3AA907275D.

3AA907275D works well, so I do not see any problem in this. Maybe later Autel will update their software and “F” also will be available.
But for now I am happy that everything works!

Later I will try to update Seat IC with VW firmware, hope I will not brick it!

Warning Test - was good idea!

[ciclo]

Ok, understood. Good luck with the Seat IC firmware update/adaptation.

Nice video, I'm going to insert it in my topic to show how the 'Warning TEST' works.
viewtopic.php?f=56&t=58703&p=529334#p529334

[spacewalker]

Later I will try to update Seat IC with VW firmware, hope I will not brick it!

when you kill IC, let me know, I can fix it

[MaDwArLoCk]

Ok, understood. Good luck with the Seat IC firmware update/adaptation.

Nice video, I'm going to insert it in my topic to show how the 'Warning TEST' works.
viewtopic.php?f=56&t=58703&p=529334#p529334

Hahaha , I’m glad that it is useful!

when you kill IC, let me know, I can fix it

So you predict that IC will be bricked?
Maybe you can suggest me how to avoid it?