Polo 6c MPI Bordcomputer

majk999 · Post by **majk999** » Sun Nov 05, 2017 1:21 pm

Hi,
I've got Polo 6c MPI 2014. In my instrument cluster there is no mfa ,there's only outside temperature.
I've bought new shifters with the trip button and install them to my car but the button is no working and there is still no bordcomputer.
Maybe there is no wiring to the bord computer?
Has anyone have got any schema to polo 6c which i can use to make some wiring?

Post by **iichel** » Sun Nov 05, 2017 1:42 pm

majk999 · Post by **majk999** » Sun Nov 05, 2017 1:45 pm

Thank you
T10 is the switchers right?
And t73 is ?

benzinkopf · Post by **benzinkopf** » Sun Nov 05, 2017 1:47 pm

in addition to the wiring, you need to enable MFA/MFD with VCDS.

T73a is one of BCM connector under the driver footwell

Sent from my iPhone using Tapatalk

Post by **iichel** » Sun Nov 05, 2017 1:48 pm

t73a is one of the bcm plugs, on drivers left

majk999 · Post by **majk999** » Sun Nov 05, 2017 4:47 pm

Thanks

majk999 · Post by **majk999** » Mon Nov 06, 2017 9:22 am

And one last question?
Do you know what is oem connection numbers to BCM and to shifters

benzinkopf · Post by **benzinkopf** » Mon Nov 06, 2017 9:24 am

iichel wrote:

here you go.

pin as per T73a above. 15, 16, 17

Sent from my iPhone using Tapatalk

majk999 · Post by **majk999** » Mon Nov 06, 2017 10:11 am

i mean what pin/connector shall I use to connect the wires to BCM and shifters
https://www.drive2.com/l/6920518/
like on this website

Post by **iichel** » Mon Nov 06, 2017 12:02 pm

stalks: MCP 1.5
BCM: micro quadlock system

majk999 · Post by **majk999** » Fri Nov 17, 2017 12:17 pm

Hi again
Where to enable boardcomputer in vcds?

majk999 · Post by **majk999** » Tue Nov 21, 2017 7:43 pm

Anyone??

Post by **iichel** » Tue Nov 21, 2017 7:47 pm

I'm sorry but I don't know. Did you check VCDS yourself for any labels?

UK-POLOS.NET - THE VW Polo Forum