FBZ Polo's

[ciclo]

In the new value ALWAYS write 0 for all remote controls.

First remote control, write 0 and do the process.
Second remote control, write 0 and do the process.

As simple as that. http://wiki.ross-tech.com/wiki/index.ph ... l_Matching

Good luck!

[firebulletz]

In the new value ALWAYS write 0 for all remote controls.

First remote control, write 0 and do the process.
Second remote control, write 0 and do the process.

As simple as that. http://wiki.ross-tech.com/wiki/index.ph ... l_Matching

Good luck! [emoji38]

Thank you ciclo!

The correct sequence is:
Enter "0" in new value -> click test -> click save -> press unlock button on key
For the second key repeat this procedure

Inviato dal mio SM-G935F utilizzando Tapatalk

[ciclo]

R Steering wheel looks perfect. (challenge achieved)

Autoscan,... when possible for you.

[firebulletz]

R Steering wheel looks perfect. (challenge achieved)

Autoscan,... when possible for you.

I will do it

After changing the bcm I have a problem. The second click of the remote control buttons does not work to lower/raise the windows and the second click of the window switches does not work (only works on the driver's side).
There is an option on vcds to enable/disable it?

Inviato dal mio SM-G935F utilizzando Tapatalk

[iichel]

did you re-learn comfort function? close windows and hold up each button for 3 seconds?

[firebulletz]

did you re-learn comfort function? close windows and hold up each button for 3 seconds?

Resolved thank you

Next step is fix the errors on autoscan. Tomorrow i will do autoscan

Inviato dal mio SM-G935F utilizzando Tapatalk

[firebulletz]

Hi,
This is my autoscan:
Monday,14,May,2018,19:39:33:00001
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
VCDS Version: 17.8.0.1
Data version: 20170721 DS276.2
www.Ross-Tech.com


VIN: WVWZZZ6RZCY080849 License Plate:
Mileage: 214780km-133458mi Repair Order:



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 6R-VW25 (6R0)
Scan: 01 03 04 08 09 15 17 19 25 37 44

VIN: WVWZZZ6RZCY080849 Mileage: 214780km-133458miles

01-Engine -- Status: Malfunction 0010
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
15-Airbags -- Status: Malfunction 0010
17-Instruments -- Status: Malfunction 0010
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: Not registered 0011
44-Steering Assist -- Status: OK 0000

-------------------------------------------------------------------------------
Address 01: Engine (J623-CAYB) Labels:. 03L-906-023-CAY.clb
Part No SW: 03L 906 023 MA HW: 03L 907 425 B
Component: 1,6l R4 CR td H33 8849
Revision: --H33--- Serial number:
Coding: 00114016002400080000
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_ECM16TDI02103L906023MA 003004
ROD: EV_ECM16TDI02103L906023LL.rod
VCID: 71E8ED58A0A91BCE75-8024

1 Fault Found:
10119 - High Pressure Fuel Rail
P00C6 00 [096] - Minimum Pressure Not Reached
Intermittent - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 67595 km
Date: 2018.05.06
Time: 00:01:11

Engine speed: 312.75 /min
Normed load value: 10.2 %
Vehicle speed: 0 km/h
Coolant temperature: 22 C
Intake air temperature: 22 C
Ambient air pressure: 990 mbar
Voltage terminal 30: 10.278 V
Unlearning counter according OBD: 26
Fuel high pressure: actual value-FUP_FIL: 3.497 MPa
Fuel pressure regulator valve: specified value rail pressure-LV_PCV_CTL: 00000001
Fuel level-FTL_CAN: 20 l
Time since engine start: 0 s
Fuel Metering Valve-VCV: 33.113 %
Fuel Pressure Regulator Valve-PCV: 46.288 %
Fuel high pressure commanded value_1-FUP_SP_KPA_ENVD: 28515.625 kPa

Readiness: 1100 0000

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels:. 6R0-907-37x-ESP82.clb
Part No SW: 6R0 907 379 AK HW: 6R0 907 379 AF
Component: ESP8.2i front H05 0001
Revision: --------
Coding: 210228E3417500B2842D14E682DA00421100
Shop #: WSC 00788 648 00255
VCID: 071CA380B22D357ECB-8052

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301) Labels: None
Part No SW: 6R0 820 045 G HW: 6R0 820 045 G
Component: Man AC 02 0101
Revision: 0002S 02
VCID: 326A22546D2F60D64C-8066

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels:. 6R0-937-08x-09.clb
Part No SW: 6R0 937 087 AD HW: 6R0 937 087 AD
Component: BCM PQ25 H+4 H42 0452
Revision: BF042001 Serial number: 5400 261170646
Coding: 3CB02BBF08A10000003808006D0B0CD00080412F60860060200000000000
Shop #: WSC 12345 123 12345
VCID: 7F0C3B60EEFD7DBEF3-802A

Subsystem 1 - Part No SW: 6R0 959 801 AB HW: 6R0 959 801 AB Labels: 6R0-959-801.CLB
Component: J386__TSG_FT 008 1611
Serial number: KU0KU025081100010210
Coding: 18BC30

Subsystem 2 - Part No SW: 6R0 959 802 AD HW: 6R0 959 802 AD Labels: 6R0-959-802.CLB
Component: J387__TSG_BT 008 1611
Serial number: KU0KU001091100015461
Coding: 08BC30

Subsystem 3 - Part No SW: 1K8 959 442 HW: 1K8 959 442
Component: E221__MFL-DC1 H04 0103
Serial number: 39170001271300057197
Coding: A4FFFF

Subsystem 4 - Part No SW: 6R0 959 811 G HW: 6R0 959 811 G
Component: J388__TSG_HL 008 1611
Serial number: KU0KU017081100014087
Coding: 08BC32

Subsystem 5 - Part No SW: 6R0 959 812 G HW: 6R0 959 812 G
Component: J389__TSG_HR 008 1611
Serial number: KU0KU030081100014426
Coding: 08BC32

2 Faults Found:
00532 - Supply Voltage B+
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 3
Fault Frequency: 1
Reset counter: 42
Time Indication: 0

00446 - Function Limitation due to Under-Voltage
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 6
Fault Frequency: 3
Reset counter: 42
Time Indication: 0


-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels:| 5K0-959-655.clb
Part No SW: 6R0 959 655 K HW: 6R0 959 655 K
Component: VW10Airbag022 H09 0020
Revision: -------- Serial number: 003GX00UZUX8
Coding: 003232
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
ROD: EV_AirbaVW10BPAVW250_VW25.rod
VCID: 4A9A5AB4EDBF081614-801E

Crash sensor for side airbag: driver side:
Serial number: 3575HRB40690OCUIB06N

Crash sensor for side airbag: front passenger side:
Serial number: 3585HRB40690OCUIDPHJ

Crash sensor for side airbag: rear: driver side:
Serial number: 3515RRB405B0M98E4981

Crash sensor for side airbag: rear: passenger side:
Serial number: 3525RRB40650MFP6O92Q

1 Fault Found:
12854016 - Implausible Data Received from Instrument Panel Control Module
U0423 00 [008] - -
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 23
Reset counter: 42
Mileage: 0 km
Date: 2000.00.00
Time: 00:00:00


-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb
Part No SW: 6R0 920 861 H HW: 6R0 920 861 H
Component: KOMBI H04 0206
Serial number: 00000008663469
Coding: 540A00
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_DashBoardUDSJCIPQ25 A01015
ROD: EV_DashBoardUDSJCIPQ25_A01_VW25.rod
VCID: 3A7A0A74BD5F989684-806E

1 Fault Found:
13893632 - Function Restricted due to Insufficient Voltage
U1400 00 [008] - -
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 2


-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels: None
Part No SW: 6R0 909 901 HW: 6R0 937 087 AD
Component: GW-K-CAN TP20 H42 0452
Revision: BF042001
Coding: 002200
Shop #: WSC 12345 123 12345
VCID: 74E6E44CD7BB2EE69E-8020

1 Fault Found:
01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 2
Fault Frequency: 109
Reset counter: 255
Mileage: 214099 km
Time Indication: 0
Date: 2012.09.22
Time: 00:09:44


-------------------------------------------------------------------------------
Address 25: Immobilizer (J285) Labels:. 5K0-920-xxx-25.clb
Part No SW: 6R0 920 861 H HW: 6R0 920 861 H
Component: IMMO H04 0014
Serial number:
ASAM Dataset: EV_ImmobUDSJCIPQ25 A01001
ROD: EV_ImmobUDSJCIPQ25.rod
VCID: 3A7A0A74BD5F989684-806E

No fault code found.

-------------------------------------------------------------------------------
Address 37: Navigation
Cannot be reached

-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 6Q0-423-156.clb
Part No: 6R0 423 156 B
Component: LenkhilfeTRW V277
Coding: 11220
Shop #: WSC 00788
VCID: 2F6C2B20EA1D4D3E23-807A

No fault code found.

End-------------------------(Elapsed Time: 02:57)--------------------------


Now i am worried D:

Inviato dal mio SM-G935F utilizzando Tapatalk

[iichel]

What is the state of the battery?

[ciclo]

What is the state of the battery?

The problem is due to how the non-original headunit (with big screen) is connected to the rest of the units. (CAN lines, software, etc)
The only one that can provide the solution is the headunit manufacturer.

[firebulletz]

What is the state of the battery?

The problem is due to how the non-original headunit (with big screen) is connected to the rest of the units. (CAN lines, software, etc)
The only one that can provide the solution is the headunit manufacturer.

With headunit you mean bcm?

Inviato dal mio SM-G935F utilizzando Tapatalk

[ciclo]

Radio-navigator-etc...

[firebulletz]

Radio-navigator-etc...

For radio i have these malfunction on autoscan (Voltage, fuel pressure)?

Now that i Think about it, i have a smal problem. When I open the door when the car is on, the lights do not turn on and the doors do not unlock. they do it after a few seconds (4 sec, 20sec, 12sec).
This happens when the car is on or off, only with my door.

It's happened since I installed the inverter for the neon strip. It immediately burned and I started to have this problem. Obviously I removed it right away

Inviato dal mio SM-G935F utilizzando Tapatalk

[firebulletz]

Hi,
I am back![emoji16][emoji16]

I have buyed a chinese autolights switch with ch/lh function. I have used more than one types of manual but ch/lh not work. I have buyed the switch with external module with sensor. I don't know what is the problem.

[iichel]

I think you forgot to 他媽的用中文說

(no honestly, I don't know how to fix it)

[firebulletz]

I think you forgot to 他媽的用中文說

(no honestly, I don't know how to fix it)

Lool [emoji23]

Inviato dal mio SM-G935F utilizzando Tapatalk