BCM max, RLS, Bixenon adaptation for my 6R Sedan

Chat about your 6R/6C model Polos here!
sreeramkumars
New
Posts: 36
Joined: Sun Aug 09, 2015 9:57 am
Drives: Polo Sedan 1.2 TSI

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by sreeramkumars »

Hi Ciclo,

Planning to do this work tomorrow using the expertise of my friend Nikhil (who is also in this forum). will keep you posted on the progress.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by ciclo »

Ok, thanks for the warning. :wink:
sreeramkumars
New
Posts: 36
Joined: Sun Aug 09, 2015 9:57 am
Drives: Polo Sedan 1.2 TSI

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by sreeramkumars »

Hi Ciclo,
Finally managed to fit RLS components and did the BCM max wiring and most of them are working beautifully.
Could you please help us in resolving these pending issues:

1) Rear fog lamp working only when headlights are on. Not working when parking is on.
2) Reverse camera flickering only when engine is started, working fine when engine is off.
(PS: We have taken reverse camera power and reverse signal for auto dimming mirror from reverse light line)
3) License plate light warning in VCDS. (despite confirming as connected correctly)

Also, attaching a full VCDS scan herewith.

Code: Select all

Tuesday,17,July,2018,16:08:47:30570
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 12.12.3.0
Data version: 20130910


VIN: MEXA15604FTXXXXXX   License Plate: 


Chassis Type: 60 (7E0)
Scan: 01 02 03 08 09 10 15 17 19 25 44 56

VIN: MEXA15604FTXXXXXX   

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: Malfunction 0010
 
-------------------------------------------------------------------------------
Address 01: Engine (J623-CBZB)       Labels: None
   Part No SW: 03F 906 070 KC    HW: 03F 907 309 AJ
   Component: SIMOS10.22AH10 6270  
   Revision: --H10---    Serial number:               
   Coding: 00250056232400080000
   Shop #: WSC 00793 648 00255
   ASAM Dataset: EV_ECM12TFS02103F 004006
   ROD: N/A
   VCID: 6DD7B9F6BCE6947640B-8038

No ASAM data for: "EV_ECM12TFS02103F" (VN75) 
No fault code found.
Readiness: 0110 0101

-------------------------------------------------------------------------------
Address 02: Auto Trans        Labels: 0AM-927-769.lbl
   Part No SW: 0AM 300 065 N    HW: 0AM 927 769 D
   Component: GSG DSG AG7     431 6502  
   Revision: 00043014    Serial number: CU501411275963
   Coding: 0000020
   Shop #: WSC 64455 001 1048576
   VCID: 3A7D42AA7528F3CE959-806F

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: None
   Part No SW: 6R0 907 379 BH    HW: 6R0 907 379 AS
   Component: ESP9.0i front H03 0001  
   Serial number: --------------
   Coding: 62DD2C63412A07C0461534708251E0800904
   Shop #: WSC 01234 785 00200
   ASAM Dataset: EV_Brake1ESP90iBOSCH 003020
   ROD: EV_Brake1ESP90iBOSCH_AU21.rod
   VCID: 850761560456CC3628B-80D0

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels: None
   Part No SW: 7E0 937 090 C    HW: 7E0 937 090 C
   Component: BCM PQ25 Max4 H82 0752  
   Revision: B9082001    Serial number: 4000 322171532
   Coding: 3A904AB808A10000013806B03CCB96905BC0612E60042001200000020000
   Shop #: WSC 00788 648 00255
   VCID: 2B5377EE4A725A461EF-807E

   Subsystem 1 - Part No: 5K7 955 559 C
   Component: RLS 051217 04  47  0106 
   Coding: 0728DD

   Subsystem 2 - Part No SW: 6R0 959 802 AL    HW: 6R0 959 802 AL  Labels: 6R0-959-802.CLB
   Component: -------------  006 5520 
   Coding: 010000

   Subsystem 3 - Part No SW: 6R0 959 801 AH    HW: 6R0 959 801 AH
   Component: -------------  006 5520 
   Coding: 010000

   Subsystem 4 - Part No SW: |55 205 980 1A    HW: 552 059 801 AH
   Component: RLS 051217 04  47  --06 
   Coding: 0728DD

   Subsystem 5 - Part No SW: 6R0 959 811 L    HW: 6R0 959 811 L
   Component: -------------  006 5520 
   Coding: 020000

   Subsystem 6 - Part No SW: 6R0 959 812 L    HW: 6R0 959 812 L
   Component: -------------  006 5520 
   Coding: 020000

1 Fault Found:
01504 - Bulb for License-Plate Light (X) 
            010 - Open or Short to Plus
             Freeze Frame:
                    Fault Status: 01101010
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 39
                    Mileage: 22160 km
                    Time Indication: 0
                    Date: 2015.06.10
                    Time: 16:06:06


-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels: 7E0-919-475.clb
   Part No SW: 7E0 919 475 K    HW: 1Q0 919 475 
   Component: PARKHILFE 4K  H03 0106  
   Revision: --------    Serial number: 35821404004439
   Coding: 300001
   Shop #: WSC 12345 123 12345
   ASAM Dataset: EV_VW75XParkAssis4K 001004
   ROD: EV_VW75XParkAssis4K.rod
   VCID: 3A7D42AABD28F3CE959-806F

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels: 5K0-959-655.clb
   Part No SW: 6R0 959 655 J    HW: 6R0 959 655 J
   Component: VW10AirbagU06 H10 0020  
   Revision: --------    Serial number: 003GW00WKAN7
   Coding: 003036
   Shop #: WSC 01234 785 00200
   ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
   ROD: EV_AirbaVW10BPAVW250.rod
   VCID: 499F2D66E8CE68560C3-801C

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels: 5K0-920-xxx-17.clb
   Part No SW: 6RF 920 860 Q    HW: 6RF 920 860 Q
   Component: KOMBI         H02 0152  
   Serial number: 00000000000000
   Coding: 140800
   Shop #: WSC 01234 785 00200
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04719
   ROD: EV_Kombi_UDS_VDD_RM09_VW21.rod
   VCID: 58B9F822236401DE83D-800D

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels: None
   Part No SW: 7E0 909 901     HW: 7E0 937 090 C
   Component: GW-K-CAN TP20 H82 0752  
   Revision: B9082001    
   Coding: 102300
   Shop #: WSC 00788 648 00255
   VCID: E8D948E21B04315EB3D-80BD

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels: 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234 
   Component: IMMO          H02 0152  
   Serial number:               
   Coding: 000000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03709
   ROD: EV_Immo_UDS_VDD_RM09_SE36.rod
   VCID: EADD32EA0D08034EA59-80BF

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist (J500)       Labels: 1Sx-909-144-44.clb
   Part No SW: 1S2 909 144 P    HW: 1S2 909 144 P
   Component: EPS_ECU       H61 1702  
   Coding: 0001000000000000
   Shop #: WSC 12345 123 12345
   ASAM Dataset: EV_SteerAssisNSK 014008
   ROD: EV_SteerAssisNSK_SE12.rod
   VCID: 418F3546D0FEA016D43-8014

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio (J503)       Labels: None
   Part No SW: 6RD 035 187 A    HW: 6RD 035 187 A
   Component: MIB2-S-R-CN   025 0210  
   Revision: -----001    Serial number: 03925GD0082306
   Coding: 0000044001000A
   Shop #: WSC 00788 648 00255
   VCID: 45872156CCD68C36E8B-8010

1 Fault Found:
00856 - Radio Antenna 
            011 - Open Circuit
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 6
                    Mileage: 21271 km
                    Time Indication: 0
                    Date: 2015.03.17
                    Time: 04:45:01


End   ---------------------------------------------------------------------
Thanks in advance.

Regards,
-Sree.
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by iichel »

BCM coding to solve the issue with the LED licence plate lights
3A904AB808A10000013806B03CCB96905BC0612E60042001200000030000

I'd suggest to attach the RVC to a relay, operated by the reverse light signal.
This way, the power is not from BCM but from a fuse.

For the reverse fog light, I'm not sure. Maybe you could have a look at the light switch? Does it output the correct signal when the light switch is in the parking light position + rear fog?
Nikhil
New
Posts: 20
Joined: Sun Sep 10, 2017 6:38 am
Drives: 1.6 tdi
Location: India

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by Nikhil »

iichel wrote: Tue Jul 17, 2018 4:41 pm BCM coding to solve the issue with the LED licence plate lights
3A904AB808A10000013806B03CCB96905BC0612E60042001200000030000

I'd suggest to attach the RVC to a relay, operated by the reverse light signal.
This way, the power is not from BCM but from a fuse.

For the reverse fog light, I'm not sure. Maybe you could have a look at the light switch? Does it output the correct signal when the light switch is in the parking light position + rear fog?
Hi, i did installation in this car. I have checked power from the headlight switch. Its giving output of rear fog light in both parking and headlight mode. Also i took output test from bcm, its working in output test.

Reverse camera is working fine in smgsharduls and vento2013 car. In vento2013 car at start it was not working but after chnaging coding headlight in bcm it started working fine. If we cant make it work by coding, then we can use relay to make it work.

Thanks for licence plate light coding.
Last edited by Nikhil on Wed Jul 18, 2018 7:24 am, edited 2 times in total.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by ciclo »

sreeramkumars wrote: Tue Jul 17, 2018 12:54 pm Hi Ciclo,
Finally managed to fit RLS components and did the BCM max wiring and most of them are working beautifully.
Could you please help us in resolving these pending issues:

1) Rear fog lamp working only when headlights are on. Not working when parking is on.

2) Reverse camera flickering only when engine is started, working fine when engine is off.
(PS: We have taken reverse camera power and reverse signal for auto dimming mirror from reverse light line)

3) License plate light warning in VCDS. (despite confirming as connected correctly)

Also, attaching a full VCDS scan herewith.

Code: Select all

End   ---------------------------------------------------------------------
Great, thanks for the report. 8)

I've checked the Autoscan. But first:

1) It is very rare this behavior of the rear fog light.
- Check that the problem persists with another AUTO light switch that you know works correctly in another 6R/Vento (PQ25). Where did you buy the AUTO light switch? Was it brand new?
- Also check the blue terminal splice for T17/9 according to the installation guide (WL3b) ... it should be correct because the rear fog light works with headlights ON.

2) Remove this installation, it's totally incorrect (I don't have time to discuss this with anyone :evil:).
- Take the RVC power from where it says :arrow: other possible devices (+30, 5A fuse)
- Reverse signal for RVC and auto dimming mirror from reverse light line/wire. (in a point as far as possible from the BCM and closer to the reversing light) (it is not absolutely necessary for auto dimming mirror)

3) Do you have LED license plate lights installed?
sreeramkumars
New
Posts: 36
Joined: Sun Aug 09, 2015 9:57 am
Drives: Polo Sedan 1.2 TSI

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by sreeramkumars »

ciclo wrote: Wed Jul 18, 2018 3:15 am Great, thanks for the report. 8)

I've checked the Autoscan. But first:

1) It is very rare this behavior of the rear fog light.
- Check that the problem persists with another AUTO light switch that you know works correctly in another 6R/Vento (PQ25). Where did you buy the AUTO light switch? Was it brand new?
- Also check the blue terminal splice for T17/9 according to the installation guide (WL3b) ... it should be correct because the rear fog light works with headlights ON.

2) Remove this installation, it's totally incorrect (I don't have time to discuss this with anyone :evil:).
- Take the RVC power from where it says :arrow: other possible devices (+30, 5A fuse)
- Reverse signal for RVC and auto dimming mirror from reverse light line/wire. (in a point as far as possible from the BCM and closer to the reversing light) (it is not absolutely necessary for auto dimming mirror)

3) Do you have LED license plate lights installed?
Thanks for the swift reply Ciclo.
1) Yes its a brand new Auto switch that I procured along with RLS sensor from vk.com forum (Roman). I'll check the connection based on WL3b and revert back.
2) Will do as suggested this weekend.
3) Yes it's installed. I'll try the coding provided by iichel and share the outcome.

Regards,
-Sree.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by ciclo »

sreeramkumars wrote: Wed Jul 18, 2018 4:28 am
Thanks for the swift reply Ciclo.
1) Yes its a brand new Auto switch that I procured along with RLS sensor from vk.com forum (Roman). I'll check the connection based on WL3b and revert back.
2) Will do as suggested this weekend.
3) Yes it's installed. I'll try the coding provided by iichel and share the outcome.

Regards,
-Sree.
Ok, we wait for the results.

I would have coded your New BCM Max ( 8) ) for LED license plate lights if you had warned me of this circumstance. :)

If your LED license plate lights are genuine/OEM enter this BCM coding:
3A904AB808A10000013806303CCB96905BC0612E60042001200000030000
sreeramkumars
New
Posts: 36
Joined: Sun Aug 09, 2015 9:57 am
Drives: Polo Sedan 1.2 TSI

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by sreeramkumars »

ciclo wrote: Wed Jul 18, 2018 9:21 am Ok, we wait for the results.

I would have coded your New BCM Max ( 8) ) for LED license plate lights if you had warned me of this circumstance. :)

If your LED license plate lights are genuine/OEM enter this BCM coding:
3A904AB808A10000013806303CCB96905BC0612E60042001200000030000
Hi Ciclo,

This coding gave the same error. However correcting to 3A904AB808A10000013806B03CCB96905BC0612E60042001200000030000 (as suggested by iichel) solved the LED license plate warning.
Attaching latest scan report

Code: Select all

Friday,20,July,2018,08:47:07:30570
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 12.12.3.0
Data version: 20130910


VIN: MEXA15604FTXXXXXX   License Plate: 



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 60 (7E0)
Scan: 01 02 03 08 09 10 15 17 19 25 44 56

VIN: MEXA15604FTXXXXXX   

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: Malfunction 0010
 
-------------------------------------------------------------------------------
Address 01: Engine (J623-CBZB)       Labels: None
   Part No SW: 03F 906 070 KC    HW: 03F 907 309 AJ
   Component: SIMOS10.22AH10 6270  
   Revision: --H10---    Serial number:               
   Coding: 00250056232400080000
   Shop #: WSC 00793 648 00255
   ASAM Dataset: EV_ECM12TFS02103F 004006
   ROD: N/A
   VCID: 6DD7B9F6BCE6947640B-8038

No ASAM data for: "EV_ECM12TFS02103F" (VN75) 
No fault code found.
Readiness: 0110 0101

-------------------------------------------------------------------------------
Address 02: Auto Trans        Labels: 0AM-927-769.lbl
   Part No SW: 0AM 300 065 N    HW: 0AM 927 769 D
   Component: GSG DSG AG7     431 6502  
   Revision: 00043014    Serial number: CU501411275963
   Coding: 0000020
   Shop #: WSC 64455 001 1048576
   VCID: 3A7D42AA7528F3CE959-806F

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: None
   Part No SW: 6R0 907 379 BH    HW: 6R0 907 379 AS
   Component: ESP9.0i front H03 0001  
   Serial number: --------------
   Coding: 62DD2C63412A07C0461534708251E0800904
   Shop #: WSC 01234 785 00200
   ASAM Dataset: EV_Brake1ESP90iBOSCH 003020
   ROD: EV_Brake1ESP90iBOSCH_AU21.rod
   VCID: 850761560456CC3628B-80D0

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255)       Labels: 6R0-907-044.clb
   Part No SW: 6R0 907 044 P    HW: 6R0 907 044 P
   Component: Climatronic   H12 0614  
   Revision: V0000000    
   VCID: 40893042D3F4A91EDBD-8015

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J019)       Labels: None
   Part No SW: 7@0 937 095 C    HW: 2E0 937 0<0 C
   Component: BFM PQ25%Max4 H=2 0252  
   Revision: B<082001    Serial number: 4500 322471532
   Coding: 3A954AB808A10000043806303CCB96955BC0612E60042501200000030005
   Shop #: WSC 66324 650 00255
   VCID: 2B5377EE4A725A461EF-807E

   Subsystem 1 - Part No: 5N7 955 55< C
   Component: RIS 051247 04  42  0406 
   Coding: 072DDD

   Subsystem 2 - Part No SW: 6W0 959 807 AL    HW: 6W0 959 807 AL
   Component: -(------(----  056 5020 
   Coding: 010500

   Subsystem 3 - Part No SW: 6W0 959 804 AH    HW: 6W0 959 804 AH
   Component: -(------(----  056 5020 
   Coding: 010500

   Subsystem 6 - Part No SW: |05 205 985 1A    HW: 502 059 804 AH
   Component: RIS 051247 04  42  -(06 
   Coding: 072DDD

   Subsystem 7 - Part No SW: 6W0 959 814 L    HW: 6W0 959 814 L
   Component: -(------(----  056 5020 
   Coding: 020500

   Subsystem 8 - Part No SW: 6W0 959 817 L    HW: 6W0 959 817 L
   Component: -(------(----  056 5020 
   Coding: 020500

No fault code found.

-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels: 7E0-919-475.clb
   Part No SW: 7E0 919 475 K    HW: 1Q0 919 475 
   Component: PARKHILFE 4K  H03 0106  
   Revision: --------    Serial number: 35821404004439
   Coding: 300001
   Shop #: WSC 12345 123 12345
   ASAM Dataset: EV_VW75XParkAssis4K 001004
   ROD: EV_VW75XParkAssis4K.rod
   VCID: 3A7D42AABD28F3CE959-806F

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels: 5K0-959-655.clb
   Part No SW: 6R0 959 655 J    HW: 6R0 959 655 J
   Component: VW10AirbagU06 H10 0020  
   Revision: --------    Serial number: 003GW00WKAN7
   Coding: 003036
   Shop #: WSC 01234 785 00200
   ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
   ROD: EV_AirbaVW10BPAVW250.rod
   VCID: 499F2D66E8CE68560C3-801C

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels: 5K0-920-xxx-17.clb
   Part No SW: 6RF 920 860 Q    HW: 6RF 920 860 Q
   Component: KOMBI         H02 0152  
   Serial number: 00000000000000
   Coding: 140800
   Shop #: WSC 01234 785 00200
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04719
   ROD: EV_Kombi_UDS_VDD_RM09_VW21.rod
   VCID: 58B9F822236401DE83D-800D

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels: None
   Part No SW: 7E0 909 901     HW: 7E0 937 090 C
   Component: GW-K-CAN TP20 H82 0752  
   Revision: B9082001    
   Coding: 102300
   Shop #: WSC 00788 648 00255
   VCID: E8D948E21B04315EB3D-80BD

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels: 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234 
   Component: IMMO          H02 0152  
   Serial number:               
   Coding: 000000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03709
   ROD: EV_Immo_UDS_VDD_RM09_SE36.rod
   VCID: EADD32EA0D08034EA59-80BF

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist (J500)       Labels: 1Sx-909-144-44.clb
   Part No SW: 1S2 909 144 P    HW: 1S2 909 144 P
   Component: EPS_ECU       H61 1702  
   Coding: 0001000000000000
   Shop #: WSC 12345 123 12345
   ASAM Dataset: EV_SteerAssisNSK 014008
   ROD: EV_SteerAssisNSK_SE12.rod
   VCID: 418F3546D0FEA016D43-8014

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio (J503)       Labels: None
   Part No SW: 6RD 035 187 A    HW: 6RD 035 187 A
   Component: MIB2-S-R-CN   025 0210  
   Revision: -----001    Serial number: 03925GD0082306
   Coding: 0000044001000A
   Shop #: WSC 00788 648 00255
   VCID: 45872156CCD68C36E8B-8010

1 Fault Found:
00856 - Radio Antenna 
            011 - Open Circuit
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 6
                    Mileage: 21271 km
                    Time Indication: 0
                    Date: 2015.03.17
                    Time: 04:45:01


End   ---------------------------------------------------------------------
Regarding the reverse camera, please ignore as I'm removing it altogether and will default park assist display to OPS. Soon I'll be upgrading from 4K to 8K OPS and a reverse camera doesn't make sense then.
So we are only left with rear fog light behavior. I'm yet to find another car with this Auto headlight switch. Hoping to test and confirm this weekend.

Regards,
-Sree.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by ciclo »

Ok.
Please tell me the part number from your LED license plate lights (OEM).
sreeramkumars
New
Posts: 36
Joined: Sun Aug 09, 2015 9:57 am
Drives: Polo Sedan 1.2 TSI

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by sreeramkumars »

ciclo wrote: Fri Jul 20, 2018 5:15 am Ok.
Please tell me the part number from your LED license plate lights (OEM).
Apologies for the delay, Ciclo.
The part number is 3AF 943 021 A.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by ciclo »

Thank you very much.
I will have to find out why in my BCM (like yours) I can activate the diagnosis of OEM LED license plate lights without faults and your Vento has this fault under the same/similar conditions.

What happened to the strange behavior of the rear fog light?


------------------------------

July 20
VCDS Version: 12.12.3.0

Address 09: Cent. Elect. (J019) Labels: None
Part No SW: 7@0 937 095 C HW: 2E0 937 0<0 C
Component: BFM PQ25%Max4 H=2 0252
Revision: B<082001 Serial number: 4500 322471532

Coding: 3A954AB808A10000043806303CCB96955BC0612E60042501200000030005
Shop #: WSC 66324 650 00255
VCID: 2B5377EE4A725A461EF-807E


Previously
July 17

Address 09: Cent. Elect. (J519) Labels: None
Part No SW: 7E0 937 090 C HW: 7E0 937 090 C
Component: BCM PQ25 Max4 H82 0752
Revision: B9082001 Serial number: 4000 322171532

Coding: 3A904AB808A10000013806B03CCB96905BC0612E60042001200000020000
Shop #: WSC 00788 648 00255
VCID: 2B5377EE4A725A461EF-807E


This bug may have different origins.
- VCDS version-origin.
- Incorrect electrical installation.
smg_shardul
Bronze Member
Posts: 176
Joined: Mon May 01, 2017 3:13 pm
Drives: Polo 6R
Location: Kolhapur

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by smg_shardul »

ciclo wrote: Wed Jul 18, 2018 3:15 am
sreeramkumars wrote: Tue Jul 17, 2018 12:54 pm Hi Ciclo,
Finally managed to fit RLS components and did the BCM max wiring and most of them are working beautifully.
Could you please help us in resolving these pending issues:

1) Rear fog lamp working only when headlights are on. Not working when parking is on.

2) Reverse camera flickering only when engine is started, working fine when engine is off.
(PS: We have taken reverse camera power and reverse signal for auto dimming mirror from reverse light line)

3) License plate light warning in VCDS. (despite confirming as connected correctly)

Also, attaching a full VCDS scan herewith.

Code: Select all

End   ---------------------------------------------------------------------
Great, thanks for the report. 8)

I've checked the Autoscan. But first:

1) It is very rare this behavior of the rear fog light.
- Check that the problem persists with another AUTO light switch that you know works correctly in another 6R/Vento (PQ25). Where did you buy the AUTO light switch? Was it brand new?
- Also check the blue terminal splice for T17/9 according to the installation guide (WL3b) ... it should be correct because the rear fog light works with headlights ON.

2) Remove this installation, it's totally incorrect (I don't have time to discuss this with anyone :evil:).
- Take the RVC power from where it says :arrow: other possible devices (+30, 5A fuse)
- Reverse signal for RVC and auto dimming mirror from reverse light line/wire. (in a point as far as possible from the BCM and closer to the reversing light) (it is not absolutely necessary for auto dimming mirror)

3) Do you have LED license plate lights installed?

Hi ciclo
Even I am facing same problem my rear fog light is not working in park light position and it's working with headlight on and reverse camera flickering
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by ciclo »

Same electrical installer for vento2013, smg_shardul, seeramkumars (Vento/Sedan) with the same symptoms in their car.
I guess the installer will have to give explanations.



Everything work like a charm in many other Vento with the 'same' wiring looms but diferent installer.
(100% success in all my wiring looms installations)

---
Notes:

1- Don't invent anything new trying to save on wires, work or time of work. Follow the original diagrams (ELSA).
2- Follow the installation guides faithfully, they are based on original electrical diagrams and the experience.
3- Don't modify the BCM coding without knowledge of what you are doing to find a solution to a poor electrical installation due to point 1.
smg_shardul
Bronze Member
Posts: 176
Joined: Mon May 01, 2017 3:13 pm
Drives: Polo 6R
Location: Kolhapur

Re: BCM max, RLS, Bixenon adaptation for my 6R Sedan

Post by smg_shardul »

ciclo wrote: Sun Jul 29, 2018 3:26 am Same electrical installer for vento2013, smg_shardul, seeramkumars (Vento/Sedan) with the same symptoms in their car.
I guess the installer will have to give explanations.



Everything work like a charm in many other Vento with the 'same' wiring looms but diferent installer.
(100% success in all my wiring looms installations)

---
Notes:

1- Don't invent anything new trying to save on wires, work or time of work. Follow the original diagrams (ELSA).
2- Follow the installation guides faithfully, they are based on original electrical diagrams and the experience.
3- Don't modify the BCM coding without knowledge of what you are doing to find a solution to a poor electrical installation due to point 1.

In my case I did wiring myself and I have coded bcm as per your guidance plus wiring is done as per your instructions provided.
I got to know about rear fog light when i read this thread because I never use rear fog lights as it disturbs vehicle behind me.
Post Reply