Page 1 of 1
Number plate LEDs
Posted: Wed Jun 13, 2018 5:50 pm
by Robby71
Ok so i've now tried 4 pairs of LEDs for the number plate bulbs and even though all state they are canbus compatible they have all put on the dash warning to check number plate bulbs
Does anyone know which bulbs do not bring on the dash warning as i'm getting fed up ordering, waiting a week for delivery and finding the new bulbs are just as bad
Thanks
Re: Number plate LEDs
Posted: Wed Jun 13, 2018 7:12 pm
by Tombirch95
Robby71 wrote:Ok so i've now tried 4 pairs of LEDs for the number plate bulbs and even though all state they are canbus compatible they have all put on the dash warning to check number plate bulbs
Does anyone know which bulbs do not bring on the dash warning as i'm getting fed up ordering, waiting a week for delivery and finding the new bulbs are just as bad
Thanks
I bought a pair of SMD bulbs from amazon that stated they where canbus compatible, in the end I just disabled the warning using VCDS just make sure to check the lights every now and then, not that you can miss them [emoji23]
Sent from my iPhone using Tapatalk
Re: Number plate LEDs
Posted: Wed Jun 13, 2018 11:40 pm
by EdgardoRodriguez
Robby71 wrote:Ok so i've now tried 4 pairs of LEDs for the number plate bulbs and even though all state they are canbus compatible they have all put on the dash warning to check number plate bulbs
Does anyone know which bulbs do not bring on the dash warning as i'm getting fed up ordering, waiting a week for delivery and finding the new bulbs are just as bad
Thanks
Canbus LED lights is a missconception, they have no can capabilities. They use a resistor in series just to emulate the current drawn from a regular incandescent bulb. So you will be using or precisely wasting current and generating hear for nothing..
But ok, I know with vcds (because I did it with a pair of osram led bulbs) that you can tell the BCM module if plate lights are regular or led style.
From my notes the following should solve your issue:
Byte 27-bit 0 -> checked
Enviado desde mi iPhone utilizando Tapatalk
Re: Number plate LEDs
Posted: Thu Jun 14, 2018 7:01 am
by ciclo
Byte11 Bit7 -->1
Re: Number plate LEDs
Posted: Thu Jun 14, 2018 8:52 pm
by Robby71
weird thing happening now - same led bulbs in and no warnings on dash anymore
Re: Number plate LEDs
Posted: Mon Jun 25, 2018 9:44 pm
by FAYBAE
I'd go OEM plate bulbs, the aftermarket ones are stupid bright so much so it kind of obscures the numberplate ha! I've had these in the past and i'd never buy another aftermarket pair. Never had issues with CANBUS tho.