Retrofitting 6C LED Headlights on 6R
So for the 10pin to 14 pin adaptors, looking to wire the DRL's manually.
On the 14 pin on the 6C:
Pin 10 goes to t46b/43 on J519
Pin 12 goes to t46b/22 on J519
Does anyone know if the output from the J519 is 12v for each of the pins above
This is so that I can provide my own supply
Or is it reduced 5v
Dont want to blow the LED unit !
Thanks
6C LED Headlights DRL wiring
-
- Getting There!
- Posts: 56
- Joined: Sat Mar 22, 2008 12:10 pm
- iichel
- Bling Bling Diamond Member
- Posts: 6368
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: 6C LED Headlights DRL wiring
pin 10 should always have about 12V, pin 12 should be the PWM wire. in DRL mode it will have 12V, in parking lights it will have about 5V. Keep in mind, the 5V will be a PWM signal, not a simple 5V signal.
-
- Getting There!
- Posts: 56
- Joined: Sat Mar 22, 2008 12:10 pm
Re: 6C LED Headlights DRL wiring
Brilliant thanks mate, just what I needed!
Im not worried about the DRL dimming function, so pin 10 to pin 10 will do me just fine
Do I need to wire up both pins for the LED module to function? So 10->10 and 10->12?
Its a quickfix and easy installation, not going full OEM with BCM etc.
Im not worried about the DRL dimming function, so pin 10 to pin 10 will do me just fine
Do I need to wire up both pins for the LED module to function? So 10->10 and 10->12?
Its a quickfix and easy installation, not going full OEM with BCM etc.