ABS Coding after upgrading brakes
-
- New
- Posts: 11
- Joined: Tue Jul 25, 2017 6:33 pm
- Drives: 6R 1.2 TSI R-line 130hp
- Location: Darlington
ABS Coding after upgrading brakes
Hi I’ve just changed my front brakes on my r line from 256 to 288
This is my code:
23DD2885492333C9091A10700059C41492CC90080005CB098F00
I’ve tried changing byte 2 to 48 and byte 10 to 12 but that coding wasn’t accepted?
This is my code:
23DD2885492333C9091A10700059C41492CC90080005CB098F00
I’ve tried changing byte 2 to 48 and byte 10 to 12 but that coding wasn’t accepted?
- iichel
- Bling Bling Diamond Member
- Posts: 6371
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ABS Coding after upgrading brakes
Can you please show a bit more information like a full autoscan?
- iichel
- Bling Bling Diamond Member
- Posts: 6371
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ABS Coding after upgrading brakes
Never mind, I got it. Your car is a 6C. Please change the coding to:
23DD4885492333C9091A10700059C41292CC90080005CB098F00
23DD4885492333C9091A10700059C41292CC90080005CB098F00
-
- New
- Posts: 11
- Joined: Tue Jul 25, 2017 6:33 pm
- Drives: 6R 1.2 TSI R-line 130hp
- Location: Darlington
Re: ABS Coding after upgrading brakes
Apologies for lack of info I’ll post a full scan when I try the coding you suggested
Polo R-line 6c 2016 model 1.2 TSI CJZC 90hp
Polo R-line 6c 2016 model 1.2 TSI CJZC 90hp
-
- New
- Posts: 11
- Joined: Tue Jul 25, 2017 6:33 pm
- Drives: 6R 1.2 TSI R-line 130hp
- Location: Darlington
Re: ABS Coding after upgrading brakes
Hello i tried your code and it was accepted!
i will be doing the upgrade to 312 brakes once these have run their course, whilte i have your attention could i bother you for that code too?
i will be doing the upgrade to 312 brakes once these have run their course, whilte i have your attention could i bother you for that code too?
- iichel
- Bling Bling Diamond Member
- Posts: 6371
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ABS Coding after upgrading brakes
Let's see by then.
-
- New
- Posts: 11
- Joined: Tue Jul 25, 2017 6:33 pm
- Drives: 6R 1.2 TSI R-line 130hp
- Location: Darlington
Re: ABS Coding after upgrading brakes
Thank you!
Brakes feel much better can’t wait to get my 312’s on
Brakes feel much better can’t wait to get my 312’s on
-
- New
- Posts: 11
- Joined: Tue Jul 25, 2017 6:33 pm
- Drives: 6R 1.2 TSI R-line 130hp
- Location: Darlington
Re: ABS Coding after upgrading brakes
Finally got these 312 on and struggling again to find the code I need
I had 288/230 on now 312/230
23DD4885492333C9091A10700059C41292CC90080005DB098F00
I’ve tried changing byte 2 to 68 and byte 15 to 16 but no luck
I had 288/230 on now 312/230
23DD4885492333C9091A10700059C41292CC90080005DB098F00
I’ve tried changing byte 2 to 68 and byte 15 to 16 but no luck
-
- New
- Posts: 11
- Joined: Tue Jul 25, 2017 6:33 pm
- Drives: 6R 1.2 TSI R-line 130hp
- Location: Darlington
Re: ABS Coding after upgrading brakes
Also tried changing byte 2 to 68 and byte 10 to 16 to no avail.
Reading other posts this could be a problem...
with a 2016 Polo 1.2 TSI R-Line is it even possible to code the ABS Module for this combination of brakes?
If this turns out to be true might I be better off upgrading rears to 270mm to keep the braking balance?
Reading other posts this could be a problem...
with a 2016 Polo 1.2 TSI R-Line is it even possible to code the ABS Module for this combination of brakes?
If this turns out to be true might I be better off upgrading rears to 270mm to keep the braking balance?
- iichel
- Bling Bling Diamond Member
- Posts: 6371
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ABS Coding after upgrading brakes
I think it's only available with the correct engine power class (GTI).
-
- New
- Posts: 11
- Joined: Tue Jul 25, 2017 6:33 pm
- Drives: 6R 1.2 TSI R-line 130hp
- Location: Darlington
Re: ABS Coding after upgrading brakes
Could well possibly be...
However I didn’t enter any security access maybe I’m being stupid and that’s the problem
However I didn’t enter any security access maybe I’m being stupid and that’s the problem
-
- New
- Posts: 11
- Joined: Tue Jul 25, 2017 6:33 pm
- Drives: 6R 1.2 TSI R-line 130hp
- Location: Darlington
Re: ABS Coding after upgrading brakes
That wasn’t the problem either, hopefully I can find a solution
These look so good want them to work good too!
These look so good want them to work good too!
- iichel
- Bling Bling Diamond Member
- Posts: 6371
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ABS Coding after upgrading brakes
perhaps if you take off the audi sticker, it will work
-
- New
- Posts: 11
- Joined: Tue Jul 25, 2017 6:33 pm
- Drives: 6R 1.2 TSI R-line 130hp
- Location: Darlington
Re: ABS Coding after upgrading brakes
Maybe sticking a VW sticker over the top they would want to work?
- iichel
- Bling Bling Diamond Member
- Posts: 6371
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: ABS Coding after upgrading brakes
Worth a shot, isn't it?