BCM Max Transporter 2013

Chat about your 6R/6C model Polos here!
Post Reply
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: BCM Max Transporter 2013

Post by ciclo »

When the TPMS unit is new or flashed, this is what usually happens... it happened to me... :)
You must load the file with the wheel pressures.
User avatar
Shadow109
Bronze Member
Posts: 118
Joined: Sun Aug 16, 2020 2:59 pm
Drives: Vw t5.1 2013
Location: Israel

Re: BCM Max Transporter 2013

Post by Shadow109 »

Finally
865A4883-0328-4D20-AACE-85CF8C052C28.jpeg
865A4883-0328-4D20-AACE-85CF8C052C28.jpeg (3.64 MiB) Viewed 3537 times
My TPMS unit was already in the middle, I did move it, but that didn’t help, so I started to play with the adaptation menu and make tests, until I found the secret 🤫
95B2B1D8-B43D-47D2-B674-01C0D6F96DAC.jpeg
95B2B1D8-B43D-47D2-B674-01C0D6F96DAC.jpeg (5.05 MiB) Viewed 3537 times
I changed the value to 1, and immediately the TP numbers had showed up
patil
Silver Member
Posts: 493
Joined: Wed Dec 07, 2016 8:34 pm
Drives: Polo6r/1.2TSI/DSG7, T-roc'20 1.5TSI/DSG7
Location: Foothills of Nilgiris, India

Re: BCM Max Transporter 2013

Post by patil »

Oh good that you found the missing link and rectified it👍

This adaptation channel should have been set to 1 by default. I remember not changing any values in adaptation channels when I installed direct tpms on my Polo6R. May be due to firmware flash the value was reset to 0. Anyways good to know, thank you😊
User avatar
Shadow109
Bronze Member
Posts: 118
Joined: Sun Aug 16, 2020 2:59 pm
Drives: Vw t5.1 2013
Location: Israel

Re: BCM Max Transporter 2013

Post by Shadow109 »

patil wrote: Sat Apr 17, 2021 4:17 pm Oh good that you found the missing link and rectified it👍

This adaptation channel should have been set to 1 by default. I remember not changing any values in adaptation channels when I installed direct tpms on my Polo6R. May be due to firmware flash the value was reset to 0. Anyways good to know, thank you😊
Its good to have so many issues, I have learned alot, I hope this helps everyone willing to retrofit TPMS
User avatar
Shadow109
Bronze Member
Posts: 118
Joined: Sun Aug 16, 2020 2:59 pm
Drives: Vw t5.1 2013
Location: Israel

Re: BCM Max Transporter 2013

Post by Shadow109 »

Hello Fernando, how are you ?

I have got A new BCM

https://pasteboard.co/K1HxnXf.jpg

I have some issues when adapting keys, dose the “E” letter requires A 315 MHZ key ?
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: BCM Max Transporter 2013

Post by ciclo »

Hi, how's it going?
7E0 ... 'E' is only for 434 Mhz.
Is BCM new? in this case Channel 99 = 0 (Factory mode), ... or maybe you bought a BCM for Kessy ...
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: BCM Max Transporter 2013

Post by ciclo »

We need a Russian friend to tell us what this means...
Image
User avatar
Shadow109
Bronze Member
Posts: 118
Joined: Sun Aug 16, 2020 2:59 pm
Drives: Vw t5.1 2013
Location: Israel

Re: BCM Max Transporter 2013

Post by Shadow109 »

Its used, A Russian guy was selling in a decent price on drive2, the Russian words means “made in Germany”

tomorrow I well check factory mode, and I will post a scan
User avatar
Shadow109
Bronze Member
Posts: 118
Joined: Sun Aug 16, 2020 2:59 pm
Drives: Vw t5.1 2013
Location: Israel

Re: BCM Max Transporter 2013

Post by Shadow109 »

ciclo wrote: Thu May 13, 2021 5:26 pm Hi, how's it going?
7E0 ... 'E' is only for 434 Mhz.
Is BCM new? in this case Channel 99 = 0 (Factory mode), ... or maybe you bought a BCM for Kessy ...
Indeed factory mode was on :roll:


New Scan :-

Code: Select all

Friday,14,May,2021,12:25:14:00009
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 21.3.0.0
Data version: 20210226 DS325.0
www.Ross-Tech.com


VIN: WV1ZZZ7HZDH036544   License Plate: 


Chassis Type: 7H-VN75 (7E0)
Scan: 01 03 04 08 09 10 15 17 19 20 25 37 3C 5F 65 77 0B

VIN: WV1ZZZ7HZDH036544   Mileage: 223950km-139156miles

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
20-High Beam Assist. -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: OK 0000
3C-Lane Change -- Status: Malfunction 0010
5F-Information Electr. -- Status: Malfunction 0010
65-Tire Pressure -- Status: OK 0000
77-Telephone -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine (J623-CAAA)       Labels:. 03L-906-022-CAA.clb
   Part No SW: 03L 906 019 GF    HW: 03L 907 309 M
   Component: R4 2,0L EDC   H44 3312  
   Revision: 26H44---    Serial number: 00000000000000
   Coding: 01114012232400080000
   Shop #: WSC 02736 790 50316
   ASAM Dataset: EV_ECM20TDI01103L906019GF 003002
   ROD: EV_ECM20TDI01103L906019FG_003.rod
   VCID: 75E154D3D4C13F23E0-8020

No fault code found.
Readiness: 0 0 0 0 1 

-------------------------------------------------------------------------------
Address 03: ABS Brakes (-----)       Labels: 7E0-907-37x-MK25AXT.clb
   Part No SW: 7E0 907 379 K    HW: 7E0 907 379 E
   Component: ESP MK25A XT  H43 0110  
   Revision: 00H43001    
   Coding: 508724AD89A70A9B24A79175796210
   Shop #: WSC 02736 790 49152
   VCID: 3A7B87EFB55F905BCD-806E

No fault code found.

-------------------------------------------------------------------------------
Address 04: Steering Angle (G085)       Labels:* 6R0-959-654.clb
   Part No SW: 6R0 959 654     HW: 6R0 959 654 
   Component: LENKW.SENSOR  H07 0070  
   Serial number: 11031913470358
   Coding: 01
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_LWSKLOVW25X 005001
   ROD: EV_LWSKLOVW25X.rod
   VCID: 7EF34BFFE1F77C7BB1-802A

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301)       Labels:| 7E5-907-047.clb
   Part No SW: 7E5 907 047 BM    HW: 7E5 907 047 BM
   Component: Climatic-T5   H20 0505  
   Revision: 00001010    
   Coding: 0000000002
   Shop #: WSC 02736 790 50316
   ASAM Dataset: EV_ClimaticT5 A01003
   ROD: EV_ClimaT5Basis.rod
   VCID: 7BF542EBF2E5695396-802E

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:. 7E0-937-BCM-V1.clb
   Part No SW: 7E0 937 090 E    HW: 7E0 937 090 E
   Component: BCM PQ25 Max4 H84 0772  
   Revision: B9084001    Serial number: 2502 306190145
   Coding: A8A0393E4E21201201280ED06EAB9ED4F08063FF608C2040320400030800
   Shop #: WSC 12345 123 12345
   VCID: 2D51BCB3741137E358-8078

   Subsystem 1 - Part No: 5K7 955 559 B  Labels: 5K7-955-559.CLB
   Component: RLS 230916 03  37  0059 
   Coding: 0228EE

   Subsystem 2 - Part No SW: 7E0 959 801     HW: 7E0 959 801   Labels: 7E0-959-80X-V1.CLB
   Component: J386__TSG_FT  002 3313 
   Serial number: --------------------
   Coding: 000000

   Subsystem 3 - Part No SW: 7E0 959 802     HW: 7E0 959 802   Labels: 7E0-959-80X-V1.CLB
   Component: J387__TSG_BT  002 3313 
   Serial number: --------------------
   Coding: 000000

No fault code found.

-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels:| 7E0-919-475.clb
   Part No SW: 7E0 919 475 AA    HW: 7N0 919 475 
   Component: PARKHILFE 8K  H06 0212  
   Revision: --------    Serial number: 28261631000160
   Coding: 108001
   Shop #: WSC 02737 790 50316
   ASAM Dataset: EV_VW75XParkAssis8K 001012
   ROD: EV_VW75XParkAssis8K_001_VN75.rod
   VCID: 71E960C3A0A913033C-8024

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5K0-959-655.clb
   Part No SW: 7E0 959 655 B    HW: 7E0 959 655 B
   Component: VW10Airbag003 H07 0013  
   Revision: --------    Serial number: 003HL00DDD0.
   Coding: 000000000000000000000000000000003033
   Shop #: WSC 02734 790 50316
   ASAM Dataset: EV_AirbaVW10BPAVN750 A01026
   ROD: EV_AirbaVW10BPAVN750_VN75.rod
   VCID: 356194D394417F2320-8060

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5K0-920-xxx-17.clb-SRI1
   Part No SW: 7E0 920 970 N    HW: 7E0 920 970 N
   Component: KOMBI         H04 0805  
   Serial number: 00000000000000
   Coding: 160A01
   Shop #: WSC 02737 790 50316
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04727
   ROD: EV_Kombi_UDS_VDD_RM09_004_VW36.rod
   VCID: 356194D394417F2320-8060

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:. 7E0-909-901.clb
   Part No SW: 7E0 909 901     HW: 7E0 937 090 E
   Component: GW-K-CAN TP20 H84 0772  
   Revision: B9084001    
   Coding: 042204
   Shop #: WSC 12345 123 12345
   VCID: 68DF0DA79B73D2CB6B-803C

No fault code found.

-------------------------------------------------------------------------------
Address 20: High Beam Assist. (J844)       Labels:| 8S0-857-511.clb
   Part No SW: 7E0 857 511 F    HW: 7E0 857 511 C
   Component: FLA           H10 0003  
   Revision: AA001001    
   Coding: 010100E200000100000000
   Shop #: WSC 12345 123 12345
   ASAM Dataset: EV_HighBeamAssisAU316 001004
   ROD: EV_HighBeamAssisAU316.rod
   VCID: 2D51BCB37C1137E358-8078

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels:| 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234 
   Component: IMMO          H04 0805  
   Serial number:               
   Coding: 000000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
   ROD: EV_Immo_UDS_VDD_RM09_VW21.rod
   VCID: 6ADB77AF8D7FE0DB7D-803E

No fault code found.

-------------------------------------------------------------------------------
Address 37: Navigation
Cannot be reached

-------------------------------------------------------------------------------
Address 3C: Lane Change (J1086)       Labels:. 5Q0-907-686.clb
   Part No SW: 5Q0 907 686 C    HW: 5Q0 907 686 C
   Component: HRE_Master    H12 0080  
   Serial number: 0466413079
   Coding: 02032102
   Shop #: WSC 09003 957 00200
   ASAM Dataset: EV_HREntryHella 001028
   ROD: N/A
   VCID: 3D718CF3AC71A763E8-8068

No ASAM data for: "EV_HREntryHella" (VN75) 
2 Faults Found:
336901 - ROD - Unknown Error Code 
          - 00 [009]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 3
                    Mileage: 223953 km
                    Date: 2021.05.14
                    Time: 10:55:04

337328 - ROD - Unknown Error Code 
          - 00 [009]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 3
                    Mileage: 223953 km
                    Date: 2021.05.14
                    Time: 10:55:04


-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-STD2.clb
   Part No SW: 5C0 035 680 G    HW: 5C0 035 680 G
   Component: MU-S-ND-ER    H41 0478  
   Serial number: VWZAZ2U1668085
   Coding: 0645000FBE00000011110001000D08001F0303C401200100CE
   Shop #: WSC 00046 123 12345
   ASAM Dataset: EV_MUStd4CTSAT 001022
   ROD: EV_MUStd4CTSAT_VN35.rod
   VCID: 2541449324E10FA390-8070

   Data carrier: 
   Subsystem 1 - Part No SW: 5NA 919 866 AL    HW: -----------
   Component: MRM1 2020/21  --- 1420 
   Serial number: --------------------

3 Faults Found:
15360768 - Component Protection 
          U1101 00 [009] - Active
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 3
                    Mileage: 223953 km
                    Date: 2021.05.14
                    Time: 10:55:04

                    Voltage terminal 30: 11.6 V

0001 - Antenna 1 for Radio 
          B1119 13 [009] - Open Circuit
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 3
                    Mileage: 223953 km
                    Date: 2021.05.14
                    Time: 10:55:05

                    Voltage terminal 30: 11.6 V
                    Status of antenna 1 for radio-Antenna current: 0 mA
                    Status of antenna 1 for radio-Connection between radio and antenna amplifier: Open circuit
                    Status of antenna 1 for radio-Connection between antenna amplifier and antenna: Not available
                    Status of antenna 1 for radio-Reception level antenna 1: 0 dBµV

0003 - Antenna 2 for radio 
          B111A 13 [009] - Open Circuit
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 3
                    Mileage: 223953 km
                    Date: 2021.05.14
                    Time: 10:55:05

                    Voltage terminal 30: 11.6 V
                    Status of antenna 2 for radio-Antenna current: 0 mA
                    Status of antenna 2 for radio-Connection between radio and antenna amplifier: Open circuit
                    Status of antenna 2 for radio-Connection between antenna amplifier and antenna: Not available
                    Status of antenna 2 for radio-Reception level antenna 2: 0 dBµV


-------------------------------------------------------------------------------
Address 65: Tire Pressure (J502)       Labels: 3AA-907-273.clb
   Part No SW: 3AA 907 273 F    HW: 5Q0 907 273 
   Component: RDKBERU30     H04 0011  
   Serial number: 30000000047437
   ASAM Dataset: EV_RDKBERU30 005005
   ROD: EV_RDKBERU30_005.rod
   VCID: 377D9EDB8E4D8D3332-8062

No fault code found.

-------------------------------------------------------------------------------
Address 77: Telephone
Cannot be reached

End-------------------------(Elapsed Time: 03:09)--------------------------
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: BCM Max Transporter 2013

Post by ciclo »

Solved! 👍
TheKeymeister
New
Posts: 22
Joined: Thu Dec 10, 2020 9:32 pm
Drives: Caravelle T5.1
Location: Lincolnshire

Re: BCM Max Transporter 2013

Post by TheKeymeister »

Apologies for jumping on the back of this thread once again, I've finally got around to uploading my parameters, still no wheel sensors fitted, but I'm getting an error from the instrument cluster due to missing messages, and no TPMS display appearing or mention of pressures in the units section. I tried disabling the indirect TPMS from the ABS unit but it made no difference.

I gave it a quick google and it came back to a thread on here where it turned out the instrument cluster was not suitable, I'm guessing it'll probably be the same for me. I've tried searching for any updated flash files for my cluster and can't find anything forthcoming....so this may be the end of the road for me with TPMS :cry:

Latest autoscan here for info https://pastebin.com/HuSfrXC5
User avatar
Shadow109
Bronze Member
Posts: 118
Joined: Sun Aug 16, 2020 2:59 pm
Drives: Vw t5.1 2013
Location: Israel

Re: BCM Max Transporter 2013

Post by Shadow109 »

TheKeymeister wrote: Fri May 28, 2021 1:23 pm Apologies for jumping on the back of this thread once again, I've finally got around to uploading my parameters, still no wheel sensors fitted, but I'm getting an error from the instrument cluster due to missing messages, and no TPMS display appearing or mention of pressures in the units section. I tried disabling the indirect TPMS from the ABS unit but it made no difference.

I gave it a quick google and it came back to a thread on here where it turned out the instrument cluster was not suitable, I'm guessing it'll probably be the same for me. I've tried searching for any updated flash files for my cluster and can't find anything forthcoming....so this may be the end of the road for me with TPMS :cry:

Latest autoscan here for info https://pastebin.com/HuSfrXC5
This error is not caused from your cluster
Address 09: Cent. Elect. (J519) Labels:. 7E0-937-BCM-V1.clb
Part No SW: 7E0 937 090 B HW: 7E0 937 090
Component: BCM PQ25 Max4 H81 0744
Your BCM hardware version is H81, your BCM have to be minimum H82 to enable address 65 (tire pressure) in can getaway
TheKeymeister
New
Posts: 22
Joined: Thu Dec 10, 2020 9:32 pm
Drives: Caravelle T5.1
Location: Lincolnshire

Re: BCM Max Transporter 2013

Post by TheKeymeister »

Hi, I thought it was H81 that was required! Hope I don't need to do another BCM swap :cry: Address 65 appears in the installation list anyway

Someone on T6 forum has asked me to check with ODIS for better fault information so I'll do that over the weekend and report back
User avatar
Shadow109
Bronze Member
Posts: 118
Joined: Sun Aug 16, 2020 2:59 pm
Drives: Vw t5.1 2013
Location: Israel

Re: BCM Max Transporter 2013

Post by Shadow109 »

If address 65 appears in your can getaway then you don’t need to change you bcm
User avatar
ciclo
Bling Bling Diamond Member
Posts: 7786
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, sPAIN, Magiclands (Mordor).
Contact:

Re: BCM Max Transporter 2013

Post by ciclo »

TheKeymeister wrote: Fri May 28, 2021 1:23 pm Latest autoscan here for info https://pastebin.com/HuSfrXC5
TheKeymeister wrote: Fri May 28, 2021 5:17 pm Hi, I thought it was H81 that was required! Hope I don't need to do another BCM swap :cry: Address 65 appears in the installation list anyway
BCM 090B is Ok for TPMS.
Supposedly and based on the SW update I did on my 6R IC, you need an instrument cluster with SW greater than 0405, but as I say it is supposedly.

The only thing that is available for Transporter, Diesel and MPH is
FL_7E0920970J__0720_S.frf but it is for 9Q5 and your IC 7E0920980G is 9Q4, ... you would need to get / find a flash file similar to this FL_7E0920980J__0720_S.frf ... or FL_7E0920980N__0805_S.frf
I searched but did not find.

---
Image
Post Reply