ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

A section of the forum for members to show off their non-polo vehicles.
User avatar
ciclo
Bling Bling Diamond Member
Posts: 5694
Joined: Sun Feb 24, 2013 10:20 am
Drives: 9N3/6R Rline/G7.5/ⵣ Rline'19/T-Cr'21
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by ciclo » Thu Jul 30, 2020 2:53 am

According to erWin:

1 For Parking aid supports. (4x front, 4x rear)

The 4 markings for brackets -1- can be found on the inside of the
bumper cover.
- If there are no markings, the center point -2- must be determined.
- The holes must be drilled from the inside to the outside with
the drill bit - VAS 6614 / 4- -3- from the supplied tool kit.
etc...

2 For Parking steering assist supports. (4x lateral)

The markings for the bracket -1- can be found on the inside of the
bumper cover.
- The holes must be drilled from the inside to the outside using
the drill bit - VAS 6614 / 4- -3-.
- Fit assembly tool for park assist steering sensors - VAS 895
003- -1-, washer -2- and thrust bearing -3- from inside of
bumper cover -5-.
etc...



Therefore, it is very likely that I'll find the markings of the 4 lateral supports that I have to install on the bumpers of our Golf 7.5.

However, it is a simple task in either of the two possibilities, it is only necessary to act with precision.
viewtopic.php?f=56&t=58703&start=4530#p540784 (o near post :) )

dcgumis
New
Posts: 40
Joined: Tue Sep 03, 2019 6:04 pm
Drives: polo 1.4 85KM CGGB
Location: Polska

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by dcgumis » Thu Jul 30, 2020 1:10 pm

hello Fernando nice golf :),
my new purchase :))
Image

User avatar
ciclo
Bling Bling Diamond Member
Posts: 5694
Joined: Sun Feb 24, 2013 10:20 am
Drives: 9N3/6R Rline/G7.5/ⵣ Rline'19/T-Cr'21
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by ciclo » Thu Jul 30, 2020 1:40 pm

Hello dcgumis, nice Golf R-line! 8)

User avatar
ciclo
Bling Bling Diamond Member
Posts: 5694
Joined: Sun Feb 24, 2013 10:20 am
Drives: 9N3/6R Rline/G7.5/ⵣ Rline'19/T-Cr'21
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by ciclo » Tue Aug 04, 2020 6:14 am

Image


to infinity and beyond...


---

User avatar
iichel
Bling Bling Diamond Member
Posts: 3872
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 1.2 TDI
Location: The Netherlands

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by iichel » Tue Aug 04, 2020 8:54 am

is this high precision driving or a cluster on the bench? somehow gear D7 does not compute with engine off and 0 km/h :P

User avatar
ciclo
Bling Bling Diamond Member
Posts: 5694
Joined: Sun Feb 24, 2013 10:20 am
Drives: 9N3/6R Rline/G7.5/ⵣ Rline'19/T-Cr'21
Location: Earth ♥, Spain ☼
Contact:

Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP

Post by ciclo » Tue Aug 04, 2020 11:37 am

Kms modification on the table of a ''used'' Golf 7.5 instrument cluster, ... without IMMO. To know more contact madwarlock.
In my case, from 700 to 33000, to strictly comply with the laws. :) viewtopic.php?f=58&t=72376&start=90#p573103

Post Reply