Re: ciclo. Wife's Golf MK7.5 Ready2Go 1.0 TSI 6MT 200Nm/l 115HP
Posted: Mon Feb 18, 2019 2:38 am
I bought a new driver's door module from the VW dealer to be able to install the folding mirrors because the original (5Q4 959 393 F) does not have the necessary pins, but they sell it without parameterization , so it works erratically (central locking, windows, etc).
The diagnosis informs us that the data is invalid.
-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386) Labels:| 5QX-959-X93-42.clb
Part No SW: 5Q4 959 593 F HW: 5Q4 959 593 F
Component: TSG FS 006 0246
Serial number: 0000343351044
Coding: 00110320D000048000001000
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_DCU2DriveSideMAXHCONT 001005
ROD: EV_DCU2DriveSideMAXHCONT_VW37.rod
VCID: 48C9A55C32341027165-801C
Drivers Door Rear Control Module:
Subsystem 1 - Part No SW: 5Q4 959 811 F HW: 5Q4 959 811 F
Component: Fond FHSG DRV 010 0004
Serial number: 00000000000009798407
Coding: 010000
1 Fault Found:
196692 - invalid data record
B2005 00 [009] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 1
Reset counter: 57
Mileage: 2746 km
Date: 2018.11.19
Time: 15:05:02
-------------------------------------------------------------------------------
I went to the VW dealer to have it parameterized, but it seems that I was speaking to them in an alien language or something similar ... they tried to parameterize it but the VW server would not support installing the module due to original configuration of my wife's golf. (self-destructive rule)
They kept the module and gave me my money back.
VCP server have the parameterization for index "E". I don't know if the module with index "F" can be parameterized with that data, so I bought a module with index F second hand.
I actually bought two second hand driver's door modules ✌ because one of them had been flashed, ... it was very cheap.
Both worked perfectly.
The diagnosis informs us that the data is invalid.
-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386) Labels:| 5QX-959-X93-42.clb
Part No SW: 5Q4 959 593 F HW: 5Q4 959 593 F
Component: TSG FS 006 0246
Serial number: 0000343351044
Coding: 00110320D000048000001000
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_DCU2DriveSideMAXHCONT 001005
ROD: EV_DCU2DriveSideMAXHCONT_VW37.rod
VCID: 48C9A55C32341027165-801C
Drivers Door Rear Control Module:
Subsystem 1 - Part No SW: 5Q4 959 811 F HW: 5Q4 959 811 F
Component: Fond FHSG DRV 010 0004
Serial number: 00000000000009798407
Coding: 010000
1 Fault Found:
196692 - invalid data record
B2005 00 [009] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 1
Reset counter: 57
Mileage: 2746 km
Date: 2018.11.19
Time: 15:05:02
-------------------------------------------------------------------------------
I went to the VW dealer to have it parameterized, but it seems that I was speaking to them in an alien language or something similar ... they tried to parameterize it but the VW server would not support installing the module due to original configuration of my wife's golf. (self-destructive rule)
They kept the module and gave me my money back.
VCP server have the parameterization for index "E". I don't know if the module with index "F" can be parameterized with that data, so I bought a module with index F second hand.
I actually bought two second hand driver's door modules ✌ because one of them had been flashed, ... it was very cheap.
Both worked perfectly.