Page 1 of 1
6n 1997 polo 8v to 16v 2000 75bhp conversion
Posted: Wed Mar 08, 2017 7:08 am
by danjsimmo23
what exactly is needed for me to do this? especially wiring... can i just use the 8v ecu? thanks.
Sent from my SM-J500FN using Tapatalk
Re: 6n 1997 polo 8v to 16v 2000 75bhp conversion
Posted: Thu Mar 09, 2017 11:46 am
by alexperkins
You need the full engine wiring loom, ECU and immobiliser plus the chip reader also
The 2000 16v is a drive by wire engine so you'll also need to change the accelerator pedal to an electronic one. It's not a clean engine swap I'm afraid
It would be better to sell the car and buy a 6N2 for the amount of work involved
Re: 6n 1997 polo 8v to 16v 2000 75bhp conversion
Posted: Thu Mar 09, 2017 12:17 pm
by danjsimmo23
both are drive by wire so thats not a problem but wiring thats a bit of effort i was only gunna do it if it was easy with wiring as i have the engine sitting in my garage :/ thanks anyway mate !
Sent from my SM-J500FN using Tapatalk