IMPORTANT ALL MEMBERS

All members need to read the following page The new General Data Protection Regulations 2018 (GDPR)

Failure to read and accept the new privacy policy may result in your account being deleted, so please take a quick read

Cheers

The UK-Polos.NET Admin Team

There's probably ?

Chat about your MKIV (6N) Polo
Post Reply
spybuggy
New
Posts: 2
Joined: Sat Jan 27, 2018 9:00 pm
Drives: 6n
Location: Danmark

There's probably ?

Post by spybuggy » Sun Feb 18, 2018 5:33 pm

Hi VWenner.

There's probably no :) :) who can / will tell me how to punch the lock cylinder out of the door handle on a VW Polo 6n.
I have tried to find something on youtube.
The lock cylinder should in some way be able to turn 90 g round with the key, but to feel without the locking piece around the lock cylinder also turning around.
But just that, with the few turning lock cylinder 90 g without the locking piece around the lock cylinder also turning around; I can not find that!

http://workshop-manuals.com/volkswagen/ ... ofile_key/

Thank You.

User avatar
alexperkins
Site Admin
Posts: 14167
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 67 Q7
Location: Poole, Dorset, UK.
Contact:

Re: There's probably ?

Post by alexperkins » Sun Feb 18, 2018 6:32 pm

I’m not sure what you are asking here?

Have you got the handle off the car and you are trying to remove the barrel from it?

spybuggy
New
Posts: 2
Joined: Sat Jan 27, 2018 9:00 pm
Drives: 6n
Location: Danmark

Re: There's probably ?

Post by spybuggy » Sun May 06, 2018 6:25 pm

I have already removed the doorhandle from the door.
And I am sitting with the handle in my hand, and will now change the lockcylinder.
But I can´t remove the cylinder from the handle.

User avatar
alexperkins
Site Admin
Posts: 14167
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 67 Q7
Location: Poole, Dorset, UK.
Contact:

Re: There's probably ?

Post by alexperkins » Sun May 06, 2018 7:11 pm

Have you removed all the rear mechanism including the close in pin that locks it into place?

If the key is in, it should pull out. Try some WD40 on it

Whatever you do, do not remove the key from the cylinder if it’s not in the handle

Post Reply