IMPORTANT ALL MEMBERS

All members need to read the following page The new General Data Protection Regulations 2018 (GDPR)

Failure to read and accept the new privacy policy may result in your account being deleted, so please take a quick read

Cheers

The UK-Polos.NET Admin Team

Complete BJX 9n3 1.8T engine, k03s turbo, manifolds, ancillaries and gearbox with vr6 clutch and g60 flywheel.

Post Reply
User avatar
Tam9n
Bronze Member
Posts: 248
Joined: Mon Jan 10, 2011 4:28 pm

Complete BJX 9n3 1.8T engine, k03s turbo, manifolds, ancillaries and gearbox with vr6 clutch and g60 flywheel.

Post by Tam9n » Sat Jan 14, 2017 3:35 am

Selling my 1.8T BJX engine and gearbox from my 2007 9n3 GTI.

- Comes with k03s turbo, exhaust manifold, inlet manifold, complete block with all ancillaries etc.
- Comes with the gearbox attached which features a vr6 clutch and g60 flywheel fitted only over a year ago.
- This is pretty much a complete engine and gearbox setup with nearly everything you need, all pipes and hoses etc all connected already. Head and block and joined so no deconstruction or building required.
- Timing belt, water pump etc was done at 65,000 miles
- Very well maintained strong engine which has 85,000 miles covered.

- Reason for sale: Built a forged engine so this is surplus to requirement.

Photos availiable

- £850
- Postage will be extra.

WilDuB
New
Posts: 1
Joined: Sun Jan 15, 2017 9:20 pm
Drives: 1.4MPi
Location: east coast

Re: Complete BJX 9n3 1.8T engine, k03s turbo, manifolds, ancillaries and gearbox with vr6 clutch and g60 flywheel.

Post by WilDuB » Sun Jan 15, 2017 9:30 pm

Would you be open to a swap? Im looking to get rid on my 2003 honda accord estate 2.4L v-tec. It's just fail MOT and looking to shift?

User avatar
Tam9n
Bronze Member
Posts: 248
Joined: Mon Jan 10, 2011 4:28 pm

Re: Complete BJX 9n3 1.8T engine, k03s turbo, manifolds, ancillaries and gearbox with vr6 clutch and g60 flywheel.

Post by Tam9n » Mon Jan 16, 2017 11:04 pm

Hi there, sadly I wouldn't be interested.
A cash sale only.

Cheers anyway! :)

M_burks
New
Posts: 3
Joined: Tue Sep 19, 2017 1:46 pm
Drives: 9n3 gti
Location: Huddersfield

Re: Complete BJX 9n3 1.8T engine, k03s turbo, manifolds, ancillaries and gearbox with vr6 clutch and g60 flywheel.

Post by M_burks » Tue Sep 19, 2017 2:11 pm

Is the gearbox for sale thanks

Post Reply