IMPORTANT ALL MEMBERS

All members need to read the following page The new General Data Protection Regulations 2018 (GDPR)

Failure to read and accept the new privacy policy may result in your account being deleted, so please take a quick read

Cheers

The UK-Polos.NET Admin Team

Polo 9n3 GTI Parts - Engine, Gearbox, Hubs, Shafts, Milltek etc

Post Reply
User avatar
Tam9n
Bronze Member
Posts: 248
Joined: Mon Jan 10, 2011 4:28 pm

Polo 9n3 GTI Parts - Engine, Gearbox, Hubs, Shafts, Milltek etc

Post by Tam9n » Wed Jan 25, 2017 12:44 pm

Hi guys, I'm doing a big turbo build so have some stuff surplus to requirements, taken from my 2007 Polo 9n3 GTI.

- Nearside Front Hub (£30)
- Offside Front Hub (£30)
- Both driveshafts - (£60)
- Dogbone mount with used red Powerflex bush pressed in (£35)
- Front lower subframe - (£30)
- Wishbones (£25)
- Front 288mm brakes with discs (£50)

- 2.5" Milltek Non Resonated Catback (£275).
- K03s Custom 2.5" Sports Cat (£150).
- Complete 02r 1.8T gearbox, filled with Redline MTL. No crunches between gears. (£250)
- K03s Turbo (£130)
- Genuine Sachs Vr6 clutch kit with release bearing and pressure plate and genuine VW g60/ABF flywheel (£150)
- Complete 1.8T BJX engine, timing belt and water pump done at 65K. Engine is on 85K. Comes with manifolds, hoses and ancillaries with exception of N75 valve. (£475).
- Shifter Tower and Gear Cables (£45).

*Located in Belfast, Northern Ireland.
Shipping availiable at extra cost, and can ship everything.

Photos availiable upon request.

Paypal accepted.

May have some extra items possibly for sale!*

Kind Regards,
Tom (07729828122).

deanus76
New
Posts: 2
Joined: Mon Feb 20, 2017 7:46 pm
Drives: 9n3 gti
Location: GB

Re: Polo 9n3 GTI Parts - Engine, Gearbox, Hubs, Shafts, Milltek etc

Post by deanus76 » Mon Feb 20, 2017 7:49 pm

Still got the custom sportscat?

Sent from my SM-G928F using Tapatalk

M_burks
New
Posts: 3
Joined: Tue Sep 19, 2017 1:46 pm
Drives: 9n3 gti
Location: Huddersfield

Re: Polo 9n3 GTI Parts - Engine, Gearbox, Hubs, Shafts, Milltek etc

Post by M_burks » Tue Sep 19, 2017 2:09 pm

Do you still have the gearbox cheers

Post Reply