Wiring Heated Seats

Chat about your MKV (6N2) Polo GTi
Post Reply
HaydenKing
New
Posts: 3
Joined: Fri Aug 17, 2018 7:44 pm
Drives: 6n2 GTi
Location: Turnford

Wiring Heated Seats

Post by HaydenKing »

So I've got heated leathers in my polo but haven't got round to wiring them up yet. I've got the switches and I've bought the loom from Kufatec but am a bit confused. I've had look at a few other guides but they all seem completely different. Some say all you need is an earth, illumination, ignition and switched power others say you need a constant as well or in place of one of the others. Some also say you have to add fuses into the loom but Kufatec don't say anything about this (though they don't tell you which wire is which either). I know this has covered half a million times before and your probably sick of writing the same thing over and over so any advice would be really appreciated. Thanks, Hayden.
Post Reply