Page 1 of 1

Unable to open drivers door from inside or outside

Posted: Sat Nov 30, 2019 12:02 pm
by 937carrera
Help :)

Icy morning, OH sys that the drivers door will not open.

Central locking is working. button pops up

Outside handle does nothing
Inside handle does nothing

I have managed to get the door trim removed near the lock and the cable appears to be intact and secured at the lock end

Is the 6N2 the same / similar as the 9N and the remedy is as in this video https://www.youtube.com/watch?v=Fy3KbKkAZZ0 , though it doesn't seem to be the same looking from the inside

Any suggestions, I suppose I always have the option of dismantling the passenger door to discover how it works

Options using a grinder are not to be welcomed ;)

Re: Unable to open drivers door from inside or outside

Posted: Sat Nov 30, 2019 1:43 pm
by 937carrera
I'm in :)

It looks like the ice was the problem. The key would not turn in the lock, but as the button was popping up I thought it was unlocked. It wasn't. Warmer air and it opened with the key. Now where is that silicone lubrcant

Re: Unable to open drivers door from inside or outside

Posted: Sun Dec 01, 2019 10:03 am
by 937carrera
Icy morning again

The door did not unlock by remote again this morning.

The key did not initially turn the lock, but a couple of seconds rubbing a warm finger on the metal part and the door unlocked with the key.

When above freezing the door unlocks with the remote.

It seems as though there is not quite enough movement of the unlock mechanism when cold, but the fact it works perfectly when a little warmer warm seems to rule out an issue with the pneumatics.

Any suggestions ???