Kerb view on passenger side mirror

[ste-pc]

Hoping someone knows how to set the default positions for this. Mirror dips each time I engage reverse but doesn't return to the original position when I drive forwards again. It only moves part of the way up and I have to manually adjust each time. Is it possible to set a default position for it to return to?

Thanks

[silverhairs]

Try looking at this site

https://www.youtube.com/watch?v=BARmpYS ... u&index=11

[ste-pc]

Thanks. The video shows how to set the lowered position when reverse is selected but I need to set the position that the mirror returns to when driving forwards again as after dipping it does not return to the original position.

[RUM4MO]

On the face of it, it sounds like it is not working as VW intended it to - so normally that involves a boring time wasting visit to your local VW dealer.

[ste-pc]

I thought it might be as I am sure it was working fine until a few weeks ago but haven't had the car long enough to be sure. I am there tomorrow so will mention it to them then
Thanks

[monkeyhanger]

Have you changed keys lately? Set-up of mirror drop is key dependent - you can set it right with one key and then grab the other key, use it and find your settings aren't tethered to that key.

[ste-pc]

I always use the same key but it's a good thought to try the other one and see how it behaves. May highlight if it is a settings issue or a fault.
Thanks