UK-POLOS.NET - THE VW Polo Forum

roywolfey wrote: ↑Thu Apr 04, 2019 1:44 pm I can't help, but noticed a retrofit cable kit here:

https://www.kufatec.com/en/all-products ... -mqb-42185

roywolfey wrote: ↑Thu Apr 04, 2019 1:44 pm I can't help, but noticed a retrofit cable kit here:

https://www.kufatec.com/en/all-products ... -mqb-42185

ciclo wrote: ↑Fri Apr 05, 2019 2:12 pm
https://imgur.com/P4taXxG

T73a
T46a
T73b

Three connectors.

tfpc123 wrote: ↑Fri Apr 05, 2019 10:28 am

roywolfey wrote: ↑Thu Apr 04, 2019 1:44 pm I can't help, but noticed a retrofit cable kit here:

https://www.kufatec.com/en/all-products ... -mqb-42185

My problem is in the adaptation channels ... Strange no one has yet done this retrofit ...

• Foot - Foot well lighting = installed

• 2C64 - Dimmwert AB 32 = 100

• 2C64 - Fehlerort_mittleres_Byte_DTC-DFCC_32 = 2

• 2C64 - Type_Of_Load_32 = LED Kleinleistung ohne Open Load Diagnose

• 2C64 - Light_Function_A_32 = Footwell light

ciclo wrote: ↑Wed Apr 10, 2019 5:23 am

tfpc123 wrote: ↑Fri Apr 05, 2019 10:28 am

roywolfey wrote: ↑Thu Apr 04, 2019 1:44 pm I can't help, but noticed a retrofit cable kit here:

https://www.kufatec.com/en/all-products ... -mqb-42185

My problem is in the adaptation channels ... Strange no one has yet done this retrofit ...

Maybe the following information may be helpful for you, it is applicable for the Golf mk7 and mk7.5, I don't know if it is applicable in the Polo AW.
Search term in BCM adaptation channels = FR

Footwell light = Fußraumbeleuchtung

---------
Example for Golf:

Footwell lights + Ambient lights (2 front + 2 rear ... Ref: 5G0947409)

Address 09, SECURITY ACCESS--> 31347
Adaptation

Leuchte30FR LC72-Lasttyp 30,not active ,16 (36-LED Kleinleistung)
Leuchte30FR LC72-Fehlerort mittleres Byte DTC-DFCC 30,00 ,16 (02)
Leuchte30FR LC72-Lichtansteuerung HD AB 30,Always ,16 (Always)
Leuchte30FR LC72-Lichtfunktion A 30,not active ,16 (Footwell Light)
Leuchte30FR LC72-Lichtfunktion B 30 ,16 (Terminal 58xs dimmer) -power supply for ambient lights function. if lights ON (AUTO-ON/side lights/low beam in light switch positions)
Leuchte30FR LC72-Lichtfunktion C 30 ,16 (Interior Lights) -power supply for footwell lights function. When open the doors.
Leuchte30FR LC72-Dimmwert AB 30,0 ,16 (I choose 60) -60 is my setting, ambient
Leuchte30FR LC72-Dimmwert CD 30,0 ,16 (I choose 100) -100 is my setting, footwell
---------

Tip for all those who read this post:

You all should / it would be good for all of you (POLO AW owners) to share the adaptation channels when you make successful modifications.

tfpc123 wrote: ↑Wed Apr 10, 2019 2:08 pm Hi

Thank you for information, In my post below I have the adaptation channels, and I already have light in my AW Polo

Thank you all

ciclo wrote: ↑Thu Apr 11, 2019 3:59 am

tfpc123 wrote: ↑Wed Apr 10, 2019 2:08 pm Hi

Thank you for information, In my post below I have the adaptation channels, and I already have light in my AW Polo

Thank you all

Great!!

---
A big hug to Ruben.

Internet starts to be very small ...

tfpc123 wrote: ↑Wed Apr 10, 2019 2:04 pm Hello guys.
Thanks to the help of my friend n4s and Helder from Portugal, we got active the footwell light in the AW Polo;)
These are the following adaptation channels:

• Foot - Foot well lighting = installed

• 2C64 - Dimmwert AB 32 = 100

• 2C64 - Fehlerort_mittleres_Byte_DTC-DFCC_32 = 2

• 2C64 - Type_Of_Load_32 = LED Kleinleistung ohne Open Load Diagnose

• 2C64 - Light_Function_A_32 = Footwell light